"电量过低，请及时充电" = "The battery is too low, please charge in time";
"固件升级成功" = "Firmware upgrade successful";
"固件升级失败" = "Firmware upgrade failed";
"固件升级中" = "Firmware Upgrading";
"确定升级到最新版本吗？" = "Are you sure you want to upgrade to the latest version?";
"暂无数据" = "No data";
"年" = "year";
"月" = "month";
"日" = "day";
"周" = "week";
"次" = "Time";
"总里程" = "total mileage";
"总消耗" = "Total consumption";
"总次数" = "Total Times";
"总时长" = "Total duration";
"运动列表" = "Sports List";
"运动时间" = "excercise time";
"平均配速" = "Average pace";
"平均速度" = "Average Speed";
"平均步频" = "Average Cadence";
"平均步幅" = "Average Stride";
"步数" = "Step count";
"厘米" = "cm";
"步/分钟" = "Steps / minute";
"当前版本" = "current version";
"目前可供升级的版本是" = "The version currently available for upgrade is";
"网络连接异常，请稍后重试" = "The network connection is abnormal, please try again later";
"已经是最新版本" = "Already the latest version";
"请开启定位权限，获取天气数据" = "Please enable location permission to get weather data";
"固件升级完成" = "Firmware upgrade completed";
"表盘推送完成" = "Dial push complete";
"所有运动" = "All Sport";
"体温" = "Temperature";
"实时体温" = "Real-time Temperature";
"摄氏度" = "℃";
"体温监测" = "Temperature Monitoring";
"平均体温" = "Average Temperature";
"最高体温" = "Maximum Temperature";
"最低体温" = "Minimum Temperature";
"提示：开始时间和结束时间是指设备执行自定义检测体温功能时间段，频率是指在规定时间范围内每隔频率时间检测一次" = "Reminder: The start time and end time refer to the time period during which the device executes the function of self-defined body temperature detection, and the frequency refers to the detection once every frequency within the specified time range";
"微信运动" = "Wechat Sport";
"接入微信运动还需如下几步" = "The following steps are required to access WeChat sports";
"No.1 保存下方的二维码到手机相册" = "No.1 Save the QR code below to the phone album";
"No.2 打开微信扫一扫" = "No.2 Open WeChat and scan";
"No.3 点击右上角相册，选取二维码" = "No.3 Click on the album in the upper right corner and select the QR code";
"绑定二维码获取失败,请稍后重试" = "Failed to obtain the bound QR code, please try again";
"注意：升级过程中请勿关闭APP，并设备与APP保持在有效的蓝牙距离内，避免升级失败" = "Note: Do not close the APP during the upgrade process, and keep the device and the APP within a valid Bluetooth distance to avoid upgrade failure";
"血压" = "Blood Pressure";
"实时血压" = "Real-time Blood Pressure";
"最低血压" = "Minimum Blood Pressure";
"最高血压" = "Maximum Blood Pressure";
"最低收缩压" = "Minimum SBP";
"平均收缩压" = "Average SBP";
"最高收缩压" = "Maximum SBP";
"最低舒张压" = "Minimum DBP";
"平均舒张压" = "Average DBP";
"最高舒张压" = "Maximum DBP";
"血氧" = "Blood Oxygen";
"实时血氧" = "Real-time Blood Oxygen";
"最低血氧" = "Minimum Blood Oxygen";
"平均血氧" = "Average Blood Oxygen";
"最高血氧" = "Maximum Blood Oxygen";
"毫米汞柱" = "mmHg";
"血氧饱和度" = "SpO2";
"测量间隔（分钟）" = "Check Interval(min)";
"微信收" = "WeChat";
"支付宝" = "Alipay";
"支付宝" = "Real-name authentication";
"微信个人收款码" = "WeChat personal money receiving QR code";
"Paypal" = "Paypal";
//"收款码:" = "fee code"
"无效二维码" = "invalid Qr code";
"请选择电话号码" = "Please Select Phone Number";
"注意事项:\n1、建议上传黑白颜色的二维码;\n2、请务必保持网络畅通;\n3、绑定过程中请将手表靠近手机,请勿操作手机和手表;\n4、确保手表电量充足;" = "Points for attention:\n1. It is recommended to upload a black and white QR code;\n2. Please be sure to keep the network smooth;\n3. In the binding process, please put the watch near the mobile phone, do not operate the mobile phone and watch;\n4, ensure that the watch battery is sufficient;";
"绑定步骤:\n1、打开" = "Binding step :\n1, open";
",去我的二维码页面保存到手机本地;\n2、打开FireBoltt,进入设备-名片-" = ",Go to my QR code page and save it to the local phone; \n2, open the Loco circle, enter the device - Business card -";
";\n3、点击上方二维码区域,添加或更换" = ";\n3、Click the QR code area above to add or replace";
"二维码;\n4、点击下方绑定按钮,将名片绑定到手表;" = "Two-dimensional code;\n4、 Click the binding button below to bind the name card to the watch;";
"绑定" = "binding";
"其他" = "other";
"推送中" = "In the push";
"检验文件" = "Inspection document";
"校验文件完成" = "Check file completion";
"正在回连设备" = "Connecting back the device";
"设备重启" = "Device restart";
"OTA升级数据为空!" = "OTA upgrade data is null!";
"OTA指令失败!" = "OTA instruction failed!";
"OTA标示偏移查找失败!" = "OTA flag offset search failed!";
