Update PX4 Firmware metadata Thu Feb 25 15:52:54 UTC 2021

src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

@@ -10462,7 +10462,7 @@ is less than 50% of this value</short_desc>
       <unit>Hz</unit>
       <reboot_required>true</reboot_required>
     </parameter>
-    <parameter name="IMU_DGYRO_CUTOFF" default="30.0" type="FLOAT">
+    <parameter name="IMU_DGYRO_CUTOFF" default="10.0" type="FLOAT">
       <short_desc>Cutoff frequency for angular acceleration (D-Term filter)</short_desc>
       <long_desc>The cutoff frequency for the 2nd order butterworth filter used on the time derivative of the measured angular velocity, also known as the D-term filter in the rate controller. The D-term uses the derivative of the rate and thus is the most susceptible to noise. Therefore, using a D-term filter allows to increase IMU_GYRO_CUTOFF, which leads to reduced control latency and permits to increase the P gains. A value of 0 disables the filter.</long_desc>
       <min>0</min>