zhaohuwei
/
QG4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Update PX4 Firmware metadata Mon Jul 29 14:50:51 UTC 2019

QGC4.4
PX4BuildBot 6 years ago
parent
095258b31d
commit
0adaa167b1
1 changed files with 13 additions and 13 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 26
      src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

26
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
Unescape View File

@ -2113,7 +2113,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi @@ -2113,7 +2113,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi
<decimal>2</decimal>
<increment>0.05</increment>
</parameter>
<parameter default="0.02" name="FW_PR_I" type="FLOAT">
<parameter default="0.1" name="FW_PR_I" type="FLOAT">
<short_desc>Pitch rate integrator gain</short_desc>
<long_desc>This gain defines how much control response will result out of a steady state error. It trims any constant error.</long_desc>
<min>0.005</min>
@ -2199,7 +2199,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi @@ -2199,7 +2199,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi
<decimal>2</decimal>
<increment>0.05</increment>
</parameter>
<parameter default="0.01" name="FW_RR_I" type="FLOAT">
<parameter default="0.1" name="FW_RR_I" type="FLOAT">
<short_desc>Roll rate integrator Gain</short_desc>
<long_desc>This gain defines how much control response will result out of a steady state error. It trims any constant error.</long_desc>
<min>0.005</min>
@ -2309,7 +2309,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi @@ -2309,7 +2309,7 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi
<decimal>2</decimal>
<increment>0.05</increment>
</parameter>
<parameter default="0.01" name="FW_YR_I" type="FLOAT">
<parameter default="0.1" name="FW_YR_I" type="FLOAT">
<short_desc>Yaw rate integrator gain</short_desc>
<long_desc>This gain defines how much control response will result out of a steady state error. It trims any constant error.</long_desc>
<min>0.0</min>
@ -4382,7 +4382,7 @@ default 1.5 turns per second</short_desc> @@ -4382,7 +4382,7 @@ default 1.5 turns per second</short_desc>
</parameter>
</group>
<group name="Multicopter Position Control">
<parameter default="10.0" name="MPC_ACC_DOWN_MAX" type="FLOAT">
<parameter default="3.0" name="MPC_ACC_DOWN_MAX" type="FLOAT">
<short_desc>Maximum vertical acceleration in velocity controlled modes down</short_desc>
<min>2.0</min>
<max>15.0</max>
@ -4390,7 +4390,7 @@ default 1.5 turns per second</short_desc> @@ -4390,7 +4390,7 @@ default 1.5 turns per second</short_desc>
<decimal>2</decimal>
<increment>1</increment>
</parameter>
<parameter default="5.0" name="MPC_ACC_HOR" type="FLOAT">
<parameter default="3.0" name="MPC_ACC_HOR" type="FLOAT">
<short_desc>Acceleration for auto and for manual</short_desc>
<long_desc>Note: In manual, this parameter is only used in MPC_POS_MODE 1.</long_desc>
<min>2.0</min>
@ -4410,7 +4410,7 @@ the vehicle will accelerate at this rate until the normal position control speed @@ -4410,7 +4410,7 @@ the vehicle will accelerate at this rate until the normal position control speed
<decimal>1</decimal>
<increment>0.1</increment>
</parameter>
<parameter default="10.0" name="MPC_ACC_HOR_MAX" type="FLOAT">
<parameter default="5.0" name="MPC_ACC_HOR_MAX" type="FLOAT">
<short_desc>Maximum horizontal acceleration for auto mode and for manual mode</short_desc>
<long_desc>Manual mode: Maximum deceleration for MPC_POS_MODE 1 and 2. Maximum acceleration and deceleration for MPC_POS_MODE 3. Auto mode: Used with MPC_AUTO_MODE 0 only. For MPC_AUTO_MODE 1, MPC_ACC_HOR is always used.</long_desc>
<min>2.0</min>
@ -4419,7 +4419,7 @@ the vehicle will accelerate at this rate until the normal position control speed @@ -4419,7 +4419,7 @@ the vehicle will accelerate at this rate until the normal position control speed
<decimal>2</decimal>
<increment>1</increment>
</parameter>
<parameter default="10.0" name="MPC_ACC_UP_MAX" type="FLOAT">
<parameter default="4.0" name="MPC_ACC_UP_MAX" type="FLOAT">
<short_desc>Maximum vertical acceleration in velocity controlled modes upward</short_desc>
<min>2.0</min>
<max>15.0</max>
@ -4563,14 +4563,14 @@ is 90 degrees. It should be lower than MPC_XY_CRUISE</short_desc> @@ -4563,14 +4563,14 @@ is 90 degrees. It should be lower than MPC_XY_CRUISE</short_desc>
<unit>deg</unit>
<decimal>1</decimal>
</parameter>
<parameter default="200.0" name="MPC_MAN_Y_MAX" type="FLOAT">
<parameter default="150.0" name="MPC_MAN_Y_MAX" type="FLOAT">
<short_desc>Max manual yaw rate</short_desc>
<min>0.0</min>
<max>400</max>
<unit>deg/s</unit>
<decimal>1</decimal>
</parameter>
<parameter default="1" name="MPC_POS_MODE" type="INT32">
<parameter default="3" name="MPC_POS_MODE" type="INT32">
<short_desc>Manual-Position control sub-mode</short_desc>
<long_desc>The supported sub-modes are: 0 Default position control where sticks map to position/velocity directly. Maximum speeds is MPC_VEL_MANUAL. 1 Smooth position control where setpoints are adjusted based on acceleration limits and jerk limits. 2 Sport mode that is the same Default position control but with velocity limits set to the maximum allowed speeds (MPC_XY_VEL_MAX) 3 Smooth position control with maximum acceleration and jerk limits (different algorithm than 1).</long_desc>
<values>
@ -4677,7 +4677,7 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -4677,7 +4677,7 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<decimal>2</decimal>
<increment>1</increment>
</parameter>
<parameter default="0.0" name="MPC_XY_MAN_EXPO" type="FLOAT">
<parameter default="0.6" name="MPC_XY_MAN_EXPO" type="FLOAT">
<short_desc>Manual position control stick exponential curve sensitivity</short_desc>
<long_desc>The higher the value the less sensitivity the stick has around zero while still reaching the maximum value with full stick deflection. 0 Purely linear input curve (default) 1 Purely cubic input curve</long_desc>
<min>0</min>
@ -4724,14 +4724,14 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -4724,14 +4724,14 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<max>0.15</max>
<decimal>2</decimal>
</parameter>
<parameter default="0.0" name="MPC_YAW_EXPO" type="FLOAT">
<parameter default="0.6" name="MPC_YAW_EXPO" type="FLOAT">
<short_desc>Manual control stick yaw rotation exponential curve</short_desc>
<long_desc>The higher the value the less sensitivity the stick has around zero while still reaching the maximum value with full stick deflection. 0 Purely linear input curve (default) 1 Purely cubic input curve</long_desc>
<min>0</min>
<max>1</max>
<decimal>2</decimal>
</parameter>
<parameter default="0.0" name="MPC_Z_MAN_EXPO" type="FLOAT">
<parameter default="0.6" name="MPC_Z_MAN_EXPO" type="FLOAT">
<short_desc>Manual control stick vertical exponential curve</short_desc>
<long_desc>The higher the value the less sensitivity the stick has around zero while still reaching the maximum value with full stick deflection. 0 Purely linear input curve (default) 1 Purely cubic input curve</long_desc>
<min>0</min>
@ -4756,7 +4756,7 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -4756,7 +4756,7 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<max>0.1</max>
<decimal>3</decimal>
</parameter>
<parameter default="0.02" name="MPC_Z_VEL_I" type="FLOAT">
<parameter default="0.1" name="MPC_Z_VEL_I" type="FLOAT">
<short_desc>Integral gain for vertical velocity error</short_desc>
<long_desc>Non zero value allows hovering thrust estimation on stabilized or autonomous takeoff.</long_desc>
<min>0.01</min>

Write Preview
Loading…
Cancel
Save