zhaohuwei
/
QG4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Update PX4 Firmware metadata Sat Aug 4 22:59:31 UTC 2018

QGC4.4
PX4BuildBot 7 years ago committed by Daniel Agar
parent
0a62b2244b
commit
16c7249a7d
1 changed files with 106 additions and 106 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 212
      src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

212
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
Unescape View File

@ -1573,7 +1573,7 @@ This parameter is used when the magnetometer fusion method is set automatically @@ -1573,7 +1573,7 @@ This parameter is used when the magnetometer fusion method is set automatically
<decimal>6</decimal>
<scope>modules/ekf2</scope>
</parameter>
<parameter default="0" name="EKF2_MAG_DECL" type="FLOAT" volatile="true">
<parameter category="System" default="0" name="EKF2_MAG_DECL" type="FLOAT" volatile="true">
<short_desc>Magnetic declination</short_desc>
<unit>deg</unit>
<decimal>1</decimal>
@ -4040,19 +4040,6 @@ Used to calculate increased terrain random walk nosie due to movement</short_des @@ -4040,19 +4040,6 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<increment>0.5</increment>
<scope>modules/navigator</scope>
</parameter>
<parameter default="1" name="MIS_YAWMODE" type="INT32">
<short_desc>Multirotor only. Yaw setpoint mode</short_desc>
<long_desc>The values are defined in the enum mission_altitude_mode</long_desc>
<min>0</min>
<max>3</max>
<scope>modules/navigator</scope>
<values>
<value code="0">Heading as set by waypoint</value>
<value code="1">Heading towards waypoint</value>
<value code="2">Heading towards home</value>
<value code="3">Heading away from home</value>
</values>
</parameter>
<parameter default="12.0" name="MIS_YAW_ERR" type="FLOAT">
<short_desc>Max yaw error in degrees needed for waypoint heading acceptance</short_desc>
<min>0</min>
@ -4072,6 +4059,19 @@ Used to calculate increased terrain random walk nosie due to movement</short_des @@ -4072,6 +4059,19 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<increment>1</increment>
<scope>modules/navigator</scope>
</parameter>
<parameter default="0" name="MPC_YAW_MODE" type="INT32">
<short_desc>Yaw mode</short_desc>
<long_desc>Specifies the heading in Auto.</long_desc>
<min>0</min>
<max>2</max>
<scope>modules/mc_pos_control</scope>
<values>
<value code="0">towards waypoint</value>
<value code="1">towards home</value>
<value code="2">away from home</value>
<value code="3">along trajectory</value>
</values>
</parameter>
<parameter default="10.0" name="NAV_ACC_RAD" type="FLOAT">
<short_desc>Acceptance Radius</short_desc>
<long_desc>Default acceptance radius, overridden by acceptance radius of waypoint if set. For fixed wing the L1 turning distance is used for horizontal acceptance.</long_desc>
@ -7805,7 +7805,7 @@ to takeoff is reached</short_desc> @@ -7805,7 +7805,7 @@ to takeoff is reached</short_desc>
</parameter>
</group>
<group name="Sensor Calibration">
<parameter category="Developer" default="1" name="CAL_ACC0_EN" type="INT32">
<parameter category="System" default="1" name="CAL_ACC0_EN" type="INT32">
<short_desc>Accelerometer 0 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
@ -7838,7 +7838,7 @@ to takeoff is reached</short_desc> @@ -7838,7 +7838,7 @@ to takeoff is reached</short_desc>
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter category="Developer" default="1" name="CAL_ACC1_EN" type="INT32">
<parameter category="System" default="1" name="CAL_ACC1_EN" type="INT32">
<short_desc>Accelerometer 1 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
@ -7871,7 +7871,7 @@ to takeoff is reached</short_desc> @@ -7871,7 +7871,7 @@ to takeoff is reached</short_desc>
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter category="Developer" default="1" name="CAL_ACC2_EN" type="INT32">
<parameter category="System" default="1" name="CAL_ACC2_EN" type="INT32">
<short_desc>Accelerometer 2 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
@ -7908,148 +7908,123 @@ to takeoff is reached</short_desc> @@ -7908,148 +7908,123 @@ to takeoff is reached</short_desc>
<short_desc>Primary accel ID</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_AIR_CMODEL" type="INT32">
<short_desc>Airspeed sensor compensation model for the SDP3x</short_desc>
<long_desc>Model with Pitot CAL_AIR_TUBED_MM: Not used, 1.5 mm tubes assumed. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor. Model without Pitot (1.5 mm tubes) CAL_AIR_TUBED_MM: Not used, 1.5 mm tubes assumed. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor. Tube Pressure Drop CAL_AIR_TUBED_MM: Diameter in mm of the pitot and tubes, must have the same diameter. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor and the static + dynamic port length of the pitot.</long_desc>
<scope>modules/sensors</scope>
<values>
<value code="0">Model with Pitot</value>
<value code="1">Model without Pitot (1.5 mm tubes)</value>
<value code="2">Tube Pressure Drop</value>
</values>
</parameter>
<parameter default="1.5" name="CAL_AIR_TUBED_MM" type="FLOAT">
<short_desc>Airspeed sensor tube diameter. Only used for the Tube Pressure Drop Compensation</short_desc>
<min>0.1</min>
<max>100</max>
<unit>millimeter</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.2" name="CAL_AIR_TUBELEN" type="FLOAT">
<short_desc>Airspeed sensor tube length</short_desc>
<long_desc>See the CAL_AIR_CMODEL explanation on how this parameter should be set.</long_desc>
<min>0.01</min>
<max>2.00</max>
<unit>meter</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_BARO_PRIME" type="INT32">
<parameter category="System" default="0" name="CAL_BARO_PRIME" type="INT32">
<short_desc>Primary baro ID</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_GYRO0_EN" type="INT32">
<parameter category="System" default="1" name="CAL_GYRO0_EN" type="INT32">
<short_desc>Gyro 0 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_GYRO0_ID" type="INT32">
<parameter category="System" default="0" name="CAL_GYRO0_ID" type="INT32">
<short_desc>ID of the Gyro that the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO0_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO0_XOFF" type="FLOAT">
<short_desc>Gyro X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO0_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO0_XSCALE" type="FLOAT">
<short_desc>Gyro X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO0_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO0_YOFF" type="FLOAT">
<short_desc>Gyro Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO0_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO0_YSCALE" type="FLOAT">
<short_desc>Gyro Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO0_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO0_ZOFF" type="FLOAT">
<short_desc>Gyro Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO0_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO0_ZSCALE" type="FLOAT">
<short_desc>Gyro Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_GYRO1_EN" type="INT32">
<parameter category="System" default="1" name="CAL_GYRO1_EN" type="INT32">
<short_desc>Gyro 1 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_GYRO1_ID" type="INT32">
<parameter category="System" default="0" name="CAL_GYRO1_ID" type="INT32">
<short_desc>ID of the Gyro that the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO1_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO1_XOFF" type="FLOAT">
<short_desc>Gyro X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO1_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO1_XSCALE" type="FLOAT">
<short_desc>Gyro X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO1_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO1_YOFF" type="FLOAT">
<short_desc>Gyro Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO1_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO1_YSCALE" type="FLOAT">
<short_desc>Gyro Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO1_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO1_ZOFF" type="FLOAT">
<short_desc>Gyro Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO1_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO1_ZSCALE" type="FLOAT">
<short_desc>Gyro Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_GYRO2_EN" type="INT32">
<parameter category="System" default="1" name="CAL_GYRO2_EN" type="INT32">
<short_desc>Gyro 2 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_GYRO2_ID" type="INT32">
<parameter category="System" default="0" name="CAL_GYRO2_ID" type="INT32">
<short_desc>ID of the Gyro that the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO2_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO2_XOFF" type="FLOAT">
<short_desc>Gyro X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO2_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO2_XSCALE" type="FLOAT">
<short_desc>Gyro X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO2_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO2_YOFF" type="FLOAT">
<short_desc>Gyro Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO2_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO2_YSCALE" type="FLOAT">
<short_desc>Gyro Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_GYRO2_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_GYRO2_ZOFF" type="FLOAT">
<short_desc>Gyro Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_GYRO2_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_GYRO2_ZSCALE" type="FLOAT">
<short_desc>Gyro Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_GYRO_PRIME" type="INT32">
<parameter category="System" default="0" name="CAL_GYRO_PRIME" type="INT32">
<short_desc>Primary gyro ID</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_MAG0_EN" type="INT32">
<parameter category="System" default="1" name="CAL_MAG0_EN" type="INT32">
<short_desc>Mag 0 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_MAG0_ID" type="INT32">
<parameter category="System" default="0" name="CAL_MAG0_ID" type="INT32">
<short_desc>ID of Magnetometer the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="-1" name="CAL_MAG0_ROT" type="INT32">
<parameter category="System" default="-1" name="CAL_MAG0_ROT" type="INT32">
<short_desc>Rotation of magnetometer 0 relative to airframe</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
@ -8086,40 +8061,40 @@ to takeoff is reached</short_desc> @@ -8086,40 +8061,40 @@ to takeoff is reached</short_desc>
<value code="25">Pitch 270°</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG0_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG0_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG0_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG0_XSCALE" type="FLOAT">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG0_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG0_YOFF" type="FLOAT">
<short_desc>Magnetometer Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG0_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG0_YSCALE" type="FLOAT">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG0_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG0_ZOFF" type="FLOAT">
<short_desc>Magnetometer Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG0_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG0_ZSCALE" type="FLOAT">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_MAG1_EN" type="INT32">
<parameter category="System" default="1" name="CAL_MAG1_EN" type="INT32">
<short_desc>Mag 1 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_MAG1_ID" type="INT32">
<parameter category="System" default="0" name="CAL_MAG1_ID" type="INT32">
<short_desc>ID of Magnetometer the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="-1" name="CAL_MAG1_ROT" type="INT32">
<parameter category="System" default="-1" name="CAL_MAG1_ROT" type="INT32">
<short_desc>Rotation of magnetometer 1 relative to airframe</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
@ -8156,40 +8131,40 @@ to takeoff is reached</short_desc> @@ -8156,40 +8131,40 @@ to takeoff is reached</short_desc>
<value code="25">Pitch 270°</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG1_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG1_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG1_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG1_XSCALE" type="FLOAT">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG1_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG1_YOFF" type="FLOAT">
<short_desc>Magnetometer Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG1_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG1_YSCALE" type="FLOAT">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG1_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG1_ZOFF" type="FLOAT">
<short_desc>Magnetometer Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG1_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG1_ZSCALE" type="FLOAT">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_MAG2_EN" type="INT32">
<parameter category="System" default="1" name="CAL_MAG2_EN" type="INT32">
<short_desc>Mag 2 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_MAG2_ID" type="INT32">
<parameter category="System" default="0" name="CAL_MAG2_ID" type="INT32">
<short_desc>ID of Magnetometer the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="-1" name="CAL_MAG2_ROT" type="INT32">
<parameter category="System" default="-1" name="CAL_MAG2_ROT" type="INT32">
<short_desc>Rotation of magnetometer 2 relative to airframe</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
@ -8226,40 +8201,40 @@ to takeoff is reached</short_desc> @@ -8226,40 +8201,40 @@ to takeoff is reached</short_desc>
<value code="25">Pitch 270°</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG2_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG2_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG2_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG2_XSCALE" type="FLOAT">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG2_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG2_YOFF" type="FLOAT">
<short_desc>Magnetometer Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG2_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG2_YSCALE" type="FLOAT">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG2_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG2_ZOFF" type="FLOAT">
<short_desc>Magnetometer Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG2_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG2_ZSCALE" type="FLOAT">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1" name="CAL_MAG3_EN" type="INT32">
<parameter category="System" default="1" name="CAL_MAG3_EN" type="INT32">
<short_desc>Mag 3 enabled</short_desc>
<boolean />
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_MAG3_ID" type="INT32">
<parameter category="System" default="0" name="CAL_MAG3_ID" type="INT32">
<short_desc>ID of Magnetometer the calibration is for</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="-1" name="CAL_MAG3_ROT" type="INT32">
<parameter category="System" default="-1" name="CAL_MAG3_ROT" type="INT32">
<short_desc>Rotation of magnetometer 2 relative to airframe</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
@ -8296,31 +8271,31 @@ to takeoff is reached</short_desc> @@ -8296,31 +8271,31 @@ to takeoff is reached</short_desc>
<value code="25">Pitch 270°</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG3_XOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG3_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG3_XSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG3_XSCALE" type="FLOAT">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG3_YOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG3_YOFF" type="FLOAT">
<short_desc>Magnetometer Y-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG3_YSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG3_YSCALE" type="FLOAT">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="CAL_MAG3_ZOFF" type="FLOAT">
<parameter category="System" default="0.0" name="CAL_MAG3_ZOFF" type="FLOAT">
<short_desc>Magnetometer Z-axis offset</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="1.0" name="CAL_MAG3_ZSCALE" type="FLOAT">
<parameter category="System" default="1.0" name="CAL_MAG3_ZSCALE" type="FLOAT">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0" name="CAL_MAG_PRIME" type="INT32">
<parameter category="System" default="0" name="CAL_MAG_PRIME" type="INT32">
<short_desc>Primary mag ID</short_desc>
<scope>modules/sensors</scope>
</parameter>
@ -8329,7 +8304,7 @@ to takeoff is reached</short_desc> @@ -8329,7 +8304,7 @@ to takeoff is reached</short_desc>
<long_desc>Pick the appropriate scaling from the datasheet. this number defines the (linear) conversion from voltage to Pascal (pa). For the MPXV7002DP this is 1000. NOTE: If the sensor always registers zero, try switching the static and dynamic tubes.</long_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.0" name="SENS_DPRES_OFF" type="FLOAT">
<parameter category="System" default="0.0" name="SENS_DPRES_OFF" type="FLOAT">
<short_desc>Differential pressure sensor offset</short_desc>
<long_desc>The offset (zero-reading) in Pascal</long_desc>
<scope>modules/sensors</scope>
@ -8366,6 +8341,31 @@ is less than 50% of this value</short_desc> @@ -8366,6 +8341,31 @@ is less than 50% of this value</short_desc>
</parameter>
</group>
<group name="Sensors">
<parameter default="0" name="CAL_AIR_CMODEL" type="INT32">
<short_desc>Airspeed sensor compensation model for the SDP3x</short_desc>
<long_desc>Model with Pitot CAL_AIR_TUBED_MM: Not used, 1.5 mm tubes assumed. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor. Model without Pitot (1.5 mm tubes) CAL_AIR_TUBED_MM: Not used, 1.5 mm tubes assumed. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor. Tube Pressure Drop CAL_AIR_TUBED_MM: Diameter in mm of the pitot and tubes, must have the same diameter. CAL_AIR_TUBELEN: Length of the tubes connecting the pitot to the sensor and the static + dynamic port length of the pitot.</long_desc>
<scope>modules/sensors</scope>
<values>
<value code="0">Model with Pitot</value>
<value code="1">Model without Pitot (1.5 mm tubes)</value>
<value code="2">Tube Pressure Drop</value>
</values>
</parameter>
<parameter default="1.5" name="CAL_AIR_TUBED_MM" type="FLOAT">
<short_desc>Airspeed sensor tube diameter. Only used for the Tube Pressure Drop Compensation</short_desc>
<min>0.1</min>
<max>100</max>
<unit>millimeter</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="0.2" name="CAL_AIR_TUBELEN" type="FLOAT">
<short_desc>Airspeed sensor tube length</short_desc>
<long_desc>See the CAL_AIR_CMODEL explanation on how this parameter should be set.</long_desc>
<min>0.01</min>
<max>2.00</max>
<unit>meter</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="63" name="CAL_MAG_SIDES" type="INT32">
<short_desc>Bitfield selecting mag sides for calibration</short_desc>
<long_desc>DETECT_ORIENTATION_TAIL_DOWN = 1 DETECT_ORIENTATION_NOSE_DOWN = 2 DETECT_ORIENTATION_LEFT = 4 DETECT_ORIENTATION_RIGHT = 8 DETECT_ORIENTATION_UPSIDE_DOWN = 16 DETECT_ORIENTATION_RIGHTSIDE_UP = 32</long_desc>

Write Preview
Loading…
Cancel
Save