Update VideoReceiver docs

VideoReceiverApp/README.md

@@ -0,0 +1,52 @@
+# VideoReceiverApp
+ 
+## Application
+ 
+This is a simple test application developed to make VideoReceiver library development and testing easier. It can also be used as part of CI for system tests.
+ 
+## Use cases and options
+ 
+Application's behaviour depends on the executable name. There are two modes - QML and console. QML mode is enabled by renaming application executable to something that starts with **Q** (for example QVideoReceiverApp). In this case **video-sink** option is not available and application always tries to use **qmlglsink** for video rendering. In regular case (executable name does not start with **Q**) **autovideosink** or **fakesink** are used, depending on options.
+ 
+### Available options and required arguments
+ ```VideoReceiverApp  [options] url```
+ 
+for example:
+ 
+ ```VideoReceiverApp -d --stop-decoding 30 rtsp://127.0.0.1:8554/test```
+ 
+#### Options
+ ```-h, --help``` - displays help
+ 
+ ```-t, --timeout <seconds>``` - specifies source timeout
+ 
+ ```-c, --connect <attempts>``` - specifies number of connection attempts
+ 
+ ```-d, --decode``` - enables or disables video decoding and rendering
+ 
+ ```--no-decode``` - disables video decoding and rendering if it was enabled by default
+ 
+ ```--stop-decoding <seconds>``` - specifies amount of seconds after which decoding should be stopped
+ 
+ ```-r, --record <file>```  - enables record video into file
+ 
+ ```-f, --format <format>``` - specifies recording file format, where format 0 - MKV, 1 - MOV, 2 - MP4
+ 
+ ```--stop-recording <seconds>``` - specifies amount of seconds after which recording should be stopped
+  ```--video-sink <sink>``` - specifies which video sink to use : 0 - autovideosink, 1 - fakesink
+ 
+#### Arguments
+ ```url``` - required, specifies video URL.
+  Following URLs are supported:
+  ```rtsp://<host>:<port>/mount/point``` - usual RTSP URL
+ 
+ ```udp://<interface>:<port>``` - H.264 over RTP/UDP
+ 
+ ```udp265://<interface>:<port>``` - H.265 over RTP/UDP
+ 
+ ```tsusb://<interface>:<port>``` - Taisync's forwarded H.264 byte aligned NALU stream over UDP
+ 
+ ```tcp://<host>:<port>``` - MPEG-2 TS over TCP
+ 
+ ```mpegts://<interface>:<port>``` - MPEG-2 TS over UDP
+ 

src/VideoReceiver/README.md

@@ -39,7 +39,7 @@ gst-launch-1.0 videotestsrc ! video/x-raw,width=640,height=480 ! videoconvert !
 
 On the receiving end, if you want to test it from the command line, you can use something like:
 ```
-gst-launch-1.0 udpsrc port=5600 caps='application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264' ! rtph264depay ! h264parse ! avdec_h264 ! autovideosink fps-update-interval=1000 sync=false
+gst-launch-1.0 udpsrc port=5600 caps='application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264' ! rtpjitterbuffer ! rtph264depay ! h264parse ! avdec_h264 ! autovideosink fps-update-interval=1000 sync=false
 ```
 
 ### Additional Protocols