zhaohuwei
/
QG4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Update PX4 Firmware metadata Wed Feb 17 14:24:41 UTC 2021

QGC4.4
PX4BuildBot 4 years ago
parent
7c42fecfe4
commit
2ca2cfeed3
1 changed files with 184 additions and 115 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 299
      src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

299
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
Unescape View File

@ -996,7 +996,7 @@ Set to 2 to use heading from motion capture</short_desc> @@ -996,7 +996,7 @@ Set to 2 to use heading from motion capture</short_desc>
<max>121212</max>
<reboot_required>true</reboot_required>
</parameter>
<parameter name="CBRK_IO_SAFETY" default="0" type="INT32" category="Developer">
<parameter name="CBRK_IO_SAFETY" default="22027" type="INT32" category="Developer">
<short_desc>Circuit breaker for IO safety</short_desc>
<long_desc>Setting this parameter to 22027 will disable IO safety. WARNING: ENABLING THIS CIRCUIT BREAKER IS AT OWN RISK</long_desc>
<min>0</min>
@ -3035,8 +3035,8 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi @@ -3035,8 +3035,8 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi
<increment>0.005</increment>
</parameter>
<parameter name="FW_PSP_OFF" default="0.0" type="FLOAT">
<short_desc>Pitch setpoint offset</short_desc>
<long_desc>An airframe specific offset of the pitch setpoint in degrees, the value is added to the pitch setpoint and should correspond to the typical cruise speed of the airframe.</long_desc>
<short_desc>Pitch setpoint offset (pitch at level flight)</short_desc>
<long_desc>An airframe specific offset of the pitch setpoint in degrees, the value is added to the pitch setpoint and should correspond to the pitch at typical cruise speed of the airframe.</long_desc>
<min>-90.0</min>
<max>90.0</max>
<unit>deg</unit>
@ -3120,15 +3120,6 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi @@ -3120,15 +3120,6 @@ This is the ratio of static pressure error to dynamic pressure generated by a wi
<decimal>3</decimal>
<increment>0.005</increment>
</parameter>
<parameter name="FW_RSP_OFF" default="0.0" type="FLOAT">
<short_desc>Roll setpoint offset</short_desc>
<long_desc>An airframe specific offset of the roll setpoint in degrees, the value is added to the roll setpoint and should correspond to the typical cruise speed of the airframe.</long_desc>
<min>-90.0</min>
<max>90.0</max>
<unit>deg</unit>
<decimal>1</decimal>
<increment>0.5</increment>
</parameter>
<parameter name="FW_R_RMAX" default="70.0" type="FLOAT">
<short_desc>Maximum roll rate</short_desc>
<long_desc>This limits the maximum roll rate the controller will output (in degrees per second).</long_desc>
@ -3454,6 +3445,14 @@ Set to 0 to disable heading hold</short_desc> @@ -3454,6 +3445,14 @@ Set to 0 to disable heading hold</short_desc>
<min>0.0</min>
<max>1.0</max>
</parameter>
<parameter name="FW_TKO_PITCH_MIN" default="10.0" type="FLOAT">
<short_desc>Minimum pitch during takeoff</short_desc>
<min>-5.0</min>
<max>30.0</max>
<unit>deg</unit>
<decimal>1</decimal>
<increment>0.5</increment>
</parameter>
</group>
<group name="FW Launch detection">
<parameter name="LAUN_ALL_ON" default="0" type="INT32" boolean="true">
@ -4258,14 +4257,14 @@ by initializing the estimator to the LPE_LAT/LON parameters when global informat @@ -4258,14 +4257,14 @@ by initializing the estimator to the LPE_LAT/LON parameters when global informat
<min>0</min>
<max>255</max>
<bitmask>
<bit index="0"> fuse GPS, requires GPS for alt. init</bit>
<bit index="1"> fuse optical flow</bit>
<bit index="2"> fuse vision position</bit>
<bit index="3"> fuse landing target</bit>
<bit index="4"> fuse land detector</bit>
<bit index="5"> pub agl as lpos down</bit>
<bit index="6"> flow gyro compensation</bit>
<bit index="7"> fuse baro</bit>
<bit index="0">fuse GPS, requires GPS for alt. init</bit>
<bit index="1">fuse optical flow</bit>
<bit index="2">fuse vision position</bit>
<bit index="3">fuse landing target</bit>
<bit index="4">fuse land detector</bit>
<bit index="5">pub agl as lpos down</bit>
<bit index="6">flow gyro compensation</bit>
<bit index="7">fuse baro</bit>
</bitmask>
</parameter>
<parameter name="LPE_GPS_DELAY" default="0.29" type="FLOAT">
@ -4705,11 +4704,6 @@ Used to calculate increased terrain random walk nosie due to movement</short_des @@ -4705,11 +4704,6 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<long_desc>If set to 1 incoming HIL GPS messages are parsed.</long_desc>
</parameter>
</group>
<group name="MKBLCTRL Testmode">
<parameter name="MKBLCTRL_TEST" default="0" type="INT32" boolean="true">
<short_desc>Test mode (Identify) of MKBLCTRL Driver</short_desc>
</parameter>
</group>
<group name="Mission">
<parameter name="COM_OBS_AVOID" default="0" type="INT32" boolean="true">
<short_desc>Flag to enable obstacle avoidance</short_desc>
@ -8915,24 +8909,31 @@ default 1.5 turns per second</short_desc> @@ -8915,24 +8909,31 @@ default 1.5 turns per second</short_desc>
<decimal>2</decimal>
<increment>0.05</increment>
</parameter>
<parameter name="GND_L1_DIST" default="5.0" type="FLOAT">
<parameter name="GND_L1_DIST" default="1.0" type="FLOAT">
<short_desc>L1 distance</short_desc>
<long_desc>This is the waypoint radius</long_desc>
<min>0.0</min>
<max>100.0</max>
<long_desc>This is the distance at which the next waypoint is activated. This should be set to about 2-4x of GND_WHEEL_BASE and not smaller than one meter (due to GPS accuracy).</long_desc>
<min>1.0</min>
<max>50.0</max>
<unit>m</unit>
<decimal>1</decimal>
<increment>0.1</increment>
</parameter>
<parameter name="GND_L1_PERIOD" default="10.0" type="FLOAT">
<parameter name="GND_L1_PERIOD" default="5.0" type="FLOAT">
<short_desc>L1 period</short_desc>
<long_desc>This is the L1 distance and defines the tracking point ahead of the rover it's following. Using values around 2-5 for a traxxas stampede. Shorten slowly during tuning until response is sharp without oscillation.</long_desc>
<min>0.0</min>
<long_desc>This is the L1 distance and defines the tracking point ahead of the rover it's following. Use values around 2-5m for a 0.3m wheel base. Tuning instructions: Shorten slowly during tuning until response is sharp without oscillation.</long_desc>
<min>0.5</min>
<max>50.0</max>
<unit>m</unit>
<decimal>1</decimal>
<increment>0.5</increment>
</parameter>
<parameter name="GND_MAN_Y_MAX" default="150.0" type="FLOAT">
<short_desc>Max manual yaw rate</short_desc>
<min>0.0</min>
<max>400</max>
<unit>deg/s</unit>
<decimal>1</decimal>
</parameter>
<parameter name="GND_MAX_ANG" default="0.7854" type="FLOAT">
<short_desc>Maximum turn angle for Ackerman steering.
At a control output of 0, the steering wheels are at 0 radians.
@ -9023,15 +9024,6 @@ At a control output of 1, the steering wheels are at GND_MAX_ANG radians</short_ @@ -9023,15 +9024,6 @@ At a control output of 1, the steering wheels are at GND_MAX_ANG radians</short_
<decimal>2</decimal>
<increment>0.01</increment>
</parameter>
<parameter name="GND_THR_IDLE" default="0.0" type="FLOAT">
<short_desc>Idle throttle</short_desc>
<long_desc>This is the minimum throttle while on the ground, it should be 0 for a rover</long_desc>
<min>0.0</min>
<max>0.4</max>
<unit>norm</unit>
<decimal>2</decimal>
<increment>0.01</increment>
</parameter>
<parameter name="GND_THR_MAX" default="0.3" type="FLOAT">
<short_desc>Throttle limit max</short_desc>
<long_desc>This is the maximum throttle % that can be used by the controller. For a Traxxas stampede vxl with the ESC set to training, 30 % is enough</long_desc>
@ -9050,8 +9042,9 @@ At a control output of 1, the steering wheels are at GND_MAX_ANG radians</short_ @@ -9050,8 +9042,9 @@ At a control output of 1, the steering wheels are at GND_MAX_ANG radians</short_
<decimal>2</decimal>
<increment>0.01</increment>
</parameter>
<parameter name="GND_WHEEL_BASE" default="2.0" type="FLOAT">
<parameter name="GND_WHEEL_BASE" default="0.31" type="FLOAT">
<short_desc>Distance from front axle to rear axle</short_desc>
<long_desc>A value of 0.31 is typical for 1/10 RC cars.</long_desc>
<min>0.0</min>
<unit>m</unit>
<decimal>3</decimal>
@ -9292,22 +9285,22 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9292,22 +9285,22 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_ACC0_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC0_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC0_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC0_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC0_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC0_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC0_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC1_ID" default="0" type="INT32" category="System">
@ -9376,22 +9369,22 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9376,22 +9369,22 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_ACC1_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC1_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC1_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC1_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC1_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC1_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC1_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC2_ID" default="0" type="INT32" category="System">
@ -9460,22 +9453,22 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9460,22 +9453,22 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_ACC2_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC2_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC2_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC2_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC2_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC2_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC2_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC3_ID" default="0" type="INT32" category="System">
@ -9544,22 +9537,22 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9544,22 +9537,22 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_ACC3_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC3_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC3_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC3_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_ACC3_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_ACC3_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_ACC3_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Accelerometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_GYRO0_ID" default="0" type="INT32" category="System">
@ -9628,13 +9621,13 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9628,13 +9621,13 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_GYRO0_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO0_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro X-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO0_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO0_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO0_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO0_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO1_ID" default="0" type="INT32" category="System">
@ -9703,13 +9696,13 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9703,13 +9696,13 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_GYRO1_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO1_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro X-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO1_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO1_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO1_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO1_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO2_ID" default="0" type="INT32" category="System">
@ -9778,13 +9771,13 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9778,13 +9771,13 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_GYRO2_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO2_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro X-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO2_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO2_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO2_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO2_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO3_ID" default="0" type="INT32" category="System">
@ -9853,13 +9846,13 @@ Particularly useful for testing different low-battery behaviour</short_desc> @@ -9853,13 +9846,13 @@ Particularly useful for testing different low-battery behaviour</short_desc>
<value code="40">Roll 90°, Pitch 315°</value>
</values>
</parameter>
<parameter name="CAL_GYRO3_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO3_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro X-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO3_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO3_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_GYRO3_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_GYRO3_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Gyro Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG0_ID" default="0" type="INT32" category="System">
@ -9935,13 +9928,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -9935,13 +9928,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG0_XODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_XODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG0_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG0_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG0_YCOMP" default="0.0" type="FLOAT" category="System">
@ -9951,13 +9944,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -9951,13 +9944,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG0_YODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_YODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG0_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG0_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG0_ZCOMP" default="0.0" type="FLOAT" category="System">
@ -9967,13 +9960,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -9967,13 +9960,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG0_ZODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_ZODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG0_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG0_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG0_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_ID" default="0" type="INT32" category="System">
@ -10049,13 +10042,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10049,13 +10042,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG1_XODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_XODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG1_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_YCOMP" default="0.0" type="FLOAT" category="System">
@ -10065,13 +10058,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10065,13 +10058,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG1_YODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_YODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG1_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_ZCOMP" default="0.0" type="FLOAT" category="System">
@ -10081,13 +10074,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10081,13 +10074,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG1_ZODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_ZODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG1_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG1_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG1_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_ID" default="0" type="INT32" category="System">
@ -10163,13 +10156,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10163,13 +10156,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG2_XODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_XODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG2_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_YCOMP" default="0.0" type="FLOAT" category="System">
@ -10179,13 +10172,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10179,13 +10172,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG2_YODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_YODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG2_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_ZCOMP" default="0.0" type="FLOAT" category="System">
@ -10195,13 +10188,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10195,13 +10188,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG2_ZODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_ZODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG2_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG2_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG2_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_ID" default="0" type="INT32" category="System">
@ -10277,13 +10270,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10277,13 +10270,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG3_XODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_XODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_XOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_XOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG3_XSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_XSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer X-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_YCOMP" default="0.0" type="FLOAT" category="System">
@ -10293,13 +10286,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10293,13 +10286,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG3_YODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_YODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_YOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_YOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG3_YSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_YSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Y-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_ZCOMP" default="0.0" type="FLOAT" category="System">
@ -10309,13 +10302,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP @@ -10309,13 +10302,13 @@ and either current or throttle depending on value of CAL_MAG_COMP_TYP
Unit for throttle-based compensation is [G] and
for current-based compensation [G/kA]</short_desc>
</parameter>
<parameter name="CAL_MAG3_ZODIAG" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_ZODIAG" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis off diagonal factor</short_desc>
</parameter>
<parameter name="CAL_MAG3_ZOFF" default="0.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_ZOFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis offset</short_desc>
</parameter>
<parameter name="CAL_MAG3_ZSCALE" default="1.0" type="FLOAT" category="System">
<parameter name="CAL_MAG3_ZSCALE" default="1.0" type="FLOAT" volatile="true" category="System">
<short_desc>Magnetometer Z-axis scaling factor</short_desc>
</parameter>
<parameter name="CAL_MAG_COMP_TYP" default="0" type="INT32" category="System">
@ -10331,7 +10324,7 @@ for current-based compensation [G/kA]</short_desc> @@ -10331,7 +10324,7 @@ for current-based compensation [G/kA]</short_desc>
<short_desc>Differential pressure sensor analog scaling</short_desc>
<long_desc>Pick the appropriate scaling from the datasheet. this number defines the (linear) conversion from voltage to Pascal (pa). For the MPXV7002DP this is 1000. NOTE: If the sensor always registers zero, try switching the static and dynamic tubes.</long_desc>
</parameter>
<parameter name="SENS_DPRES_OFF" default="0.0" type="FLOAT" category="System">
<parameter name="SENS_DPRES_OFF" default="0.0" type="FLOAT" volatile="true" category="System">
<short_desc>Differential pressure sensor offset</short_desc>
<long_desc>The offset (zero-reading) in Pascal</long_desc>
</parameter>
@ -10821,6 +10814,13 @@ How often the sensor is readout</short_desc> @@ -10821,6 +10814,13 @@ How often the sensor is readout</short_desc>
<unit>celcius</unit>
<decimal>3</decimal>
</parameter>
<parameter name="SENS_IMU_TEMP_FF" default="0.05" type="FLOAT" category="System">
<short_desc>IMU heater controller feedforward value</short_desc>
<min>0</min>
<max>1.0</max>
<unit>%</unit>
<decimal>3</decimal>
</parameter>
<parameter name="SENS_IMU_TEMP_I" default="0.025" type="FLOAT" category="System">
<short_desc>IMU heater controller integrator gain value</short_desc>
<min>0</min>
@ -10835,6 +10835,11 @@ How often the sensor is readout</short_desc> @@ -10835,6 +10835,11 @@ How often the sensor is readout</short_desc>
<unit>us/C</unit>
<decimal>3</decimal>
</parameter>
<parameter name="SENS_INT_BARO_EN" default="1" type="INT32" boolean="true" category="System">
<short_desc>Enable internal barometers</short_desc>
<long_desc>For systems with an external barometer, this should be set to false to make sure that the external is used.</long_desc>
<reboot_required>true</reboot_required>
</parameter>
<parameter name="SENS_LEDDAR1_CFG" default="0" type="INT32">
<short_desc>Serial Configuration for LeddarOne Rangefinder</short_desc>
<long_desc>Configure on which serial port to run LeddarOne Rangefinder.</long_desc>
@ -12729,6 +12734,43 @@ How often the sensor is readout</short_desc> @@ -12729,6 +12734,43 @@ How often the sensor is readout</short_desc>
<unit>m</unit>
</parameter>
</group>
<group name="UAVCAN v1">
<parameter name="UAVCAN_V1_BAT_ID" default="4242" type="INT32">
<short_desc>UAVCAN v1 battery port ID</short_desc>
<min>1</min>
<max>32767</max>
</parameter>
<parameter name="UAVCAN_V1_BAT_MD" default="0" type="INT32">
<short_desc>UAVCAN v1 battery mode</short_desc>
<reboot_required>true</reboot_required>
<values>
<value code="0">Disable</value>
<value code="1">Receive BMSStatus</value>
<value code="2">Send BMSStatus</value>
</values>
</parameter>
<parameter name="UAVCAN_V1_BAUD" default="1000000" type="INT32">
<short_desc>UAVCAN/CAN v1 bus bitrate</short_desc>
<min>20000</min>
<max>1000000</max>
<unit>bit/s</unit>
<reboot_required>true</reboot_required>
</parameter>
<parameter name="UAVCAN_V1_ENABLE" default="0" type="INT32" boolean="true">
<short_desc>UAVCAN v1</short_desc>
<long_desc>0 - UAVCAN disabled. 1 - Enables UAVCANv1</long_desc>
<reboot_required>true</reboot_required>
</parameter>
</group>
<group name="UAVCANv1">
<parameter name="UAVCAN_V1_ID" default="1" type="INT32">
<short_desc>UAVCAN v1 Node ID</short_desc>
<long_desc>Read the specs at http://uavcan.org to learn more about Node ID.</long_desc>
<min>1</min>
<max>125</max>
<reboot_required>true</reboot_required>
</parameter>
</group>
<group name="UUV Attitude Control">
<parameter name="UUV_DIRCT_PITCH" default="0.0" type="FLOAT">
<short_desc>Direct pitch input</short_desc>
@ -12768,6 +12810,33 @@ How often the sensor is readout</short_desc> @@ -12768,6 +12810,33 @@ How often the sensor is readout</short_desc>
<short_desc>Yawh proportional gain</short_desc>
</parameter>
</group>
<group name="UUV Position Control">
<parameter name="UUV_GAIN_X_D" default="0.2" type="FLOAT">
<short_desc>Gain of D controller X</short_desc>
</parameter>
<parameter name="UUV_GAIN_X_P" default="1.0" type="FLOAT">
<short_desc>Gain of P controller X</short_desc>
</parameter>
<parameter name="UUV_GAIN_Y_D" default="0.2" type="FLOAT">
<short_desc>Gain of D controller Y</short_desc>
</parameter>
<parameter name="UUV_GAIN_Y_P" default="1.0" type="FLOAT">
<short_desc>Gain of P controller Y</short_desc>
</parameter>
<parameter name="UUV_GAIN_Z_D" default="0.2" type="FLOAT">
<short_desc>Gain of D controller Z</short_desc>
</parameter>
<parameter name="UUV_GAIN_Z_P" default="1.0" type="FLOAT">
<short_desc>Gain of P controller Z</short_desc>
</parameter>
<parameter name="UUV_STAB_MODE" default="1" type="INT32">
<short_desc>Stabilization mode(1) or Position Control(0)</short_desc>
<values>
<value code="0">Position Control</value>
<value code="1">Stabilization Mode</value>
</values>
</parameter>
</group>
<group name="VTOL Attitude Control">
<parameter name="VT_ARSP_BLEND" default="8.0" type="FLOAT">
<short_desc>Transition blending airspeed</short_desc>

Write Preview
Loading…
Cancel
Save