diff --git a/translations/qgc_source_tr_TR.ts b/translations/qgc_source_tr_TR.ts
index 3454929..27358dc 100644
--- a/translations/qgc_source_tr_TR.ts
+++ b/translations/qgc_source_tr_TR.ts
@@ -6,7 +6,7 @@
ADSB Server Error: %1
- ADSB Server Error: %1
+ ADSB Server Error: %1
@@ -15,54 +15,54 @@
Airframe is currently not set.
- Airframe is currently not set.
+ Airframe is currently not set.Currently set to frame class '%1'
- Currently set to frame class '%1'
+ Currently set to frame class '%1' and frame type '%2'
- and frame type '%2'
+ and frame type '%2'.period for end of sentence
- .
+ . To change this configuration, select the desired frame class below.
- To change this configuration, select the desired frame class below.
+ To change this configuration, select the desired frame class below.Frame Type
- Frame Type
+ Frame TypeInvalid setting for FRAME_TYPE. Click to Reset.
- Invalid setting for FRAME_TYPE. Click to Reset.
+ Invalid setting for FRAME_TYPE. Click to Reset.Frame
- Frame
+ FrameFrame Setup is used to select the airframe which matches your vehicle.
- Frame Setup is used to select the airframe which matches your vehicle.
+ Frame Setup is used to select the airframe which matches your vehicle.
@@ -70,12 +70,12 @@
Param file github json download failed: %1
- Param file github json download failed: %1
+ Param file github json download failed: %1Param file download failed: %1
- Param file download failed: %1
+ Param file download failed: %1
@@ -84,25 +84,25 @@
Frame Class
- Frame Class
+ Frame ClassFrame Type
- Frame Type
+ Frame TypeFirmware Version
- Firmware Version
+ Firmware VersionUnknown
- Unknown
+ Unknown
@@ -110,7 +110,7 @@
WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406
- WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406
+ WARNING: The flight board you are using has a critical service bulletin against it which advises against flying. For details see: https://discuss.cubepilot.org/t/sb-0000002-critical-service-bulletin-for-cubes-purchased-between-january-2019-to-present-do-not-fly/406
@@ -119,49 +119,49 @@
Disabled
- Disabled
+ DisabledChannel
- Channel
+ Channel Gimbal
- Gimbal
+ Gimbal Stabilize
- Stabilize
+ StabilizeServo reverse
- Servo reverse
+ Servo reverseOutput channel:
- Output channel:
+ Output channel:Input channel:
- Input channel:
+ Input channel:Gimbal angle limits:
- Gimbal angle limits:
+ Gimbal angle limits:
@@ -169,7 +169,7 @@
min
- min
+ min
@@ -177,65 +177,65 @@
max
- max
+ maxServo PWM limits:
- Servo PWM limits:
+ Servo PWM limits:Gimbal Settings
- Gimbal Settings
+ Gimbal SettingsType:
- Type:
+ Type:Gimbal Type changes takes affect next reboot of autopilot
- Gimbal Type changes takes affect next reboot of autopilot
+ Gimbal Type changes takes affect next reboot of autopilotDefault Mode:
- Default Mode:
+ Default Mode:Tilt
- Tilt
+ TiltRoll
- Roll
+ RollPan
- Pan
+ PanCamera
- Camera
+ CameraCamera setup is used to adjust camera and gimbal settings.
- Camera setup is used to adjust camera and gimbal settings.
+ Camera setup is used to adjust camera and gimbal settings.
@@ -244,25 +244,25 @@
Gimbal type
- Gimbal type
+ Gimbal typeTilt input channel
- Tilt input channel
+ Tilt input channelPan input channel
- Pan input channel
+ Pan input channelRoll input channel
- Roll input channel
+ Roll input channel
@@ -271,97 +271,97 @@
Disabled
- Disabled
+ DisabledChannel 5
- Channel 5
+ Channel 5Channel 6
- Channel 6
+ Channel 6Channel 7
- Channel 7
+ Channel 7Channel 8
- Channel 8
+ Channel 8Channel 9
- Channel 9
+ Channel 9Channel 10
- Channel 10
+ Channel 10Channel 11
- Channel 11
+ Channel 11Channel 12
- Channel 12
+ Channel 12Channel 13
- Channel 13
+ Channel 13Channel 14
- Channel 14
+ Channel 14Gimbal
- Gimbal
+ Gimbal Output channel:
- Output channel:
+ Output channel:Servo reverse
- Servo reverse
+ Servo reverseStabilize
- Stabilize
+ StabilizeServo PWM limits:
- Servo PWM limits:
+ Servo PWM limits:
@@ -369,7 +369,7 @@
min
- min
+ min
@@ -377,55 +377,55 @@
max
- max
+ maxGimbal angle limits:
- Gimbal angle limits:
+ Gimbal angle limits:Gimbal Settings
- Gimbal Settings
+ Gimbal SettingsType:
- Type:
+ Type:Gimbal Type changes takes affect next reboot of autopilot
- Gimbal Type changes takes affect next reboot of autopilot
+ Gimbal Type changes takes affect next reboot of autopilotDefault Mode:
- Default Mode:
+ Default Mode:Tilt
- Tilt
+ TiltRoll
- Roll
+ RollPan
- Pan
+ Pan
@@ -433,63 +433,63 @@
Error during Solo video link setup: %1
- Error during Solo video link setup: %1
+ Error during Solo video link setup: %1Unable to change altitude, vehicle altitude not known.
- Unable to change altitude, vehicle altitude not known.
+ Unable to change altitude, vehicle altitude not known.Unable to pause vehicle.
- Unable to pause vehicle.
+ Unable to pause vehicle.Vehicle does not support guided takeoff
- Vehicle does not support guided takeoff
+ Vehicle does not support guided takeoffUnable to takeoff, vehicle position not known.
- Unable to takeoff, vehicle position not known.
+ Unable to takeoff, vehicle position not known.Unable to takeoff: Vehicle failed to change to Guided mode.
- Unable to takeoff: Vehicle failed to change to Guided mode.
+ Unable to takeoff: Vehicle failed to change to Guided mode.Unable to takeoff: Vehicle failed to arm.
- Unable to takeoff: Vehicle failed to arm.
+ Unable to takeoff: Vehicle failed to arm.Unable to start mission: Vehicle failed to change to Auto mode.
- Unable to start mission: Vehicle failed to change to Auto mode.
+ Unable to start mission: Vehicle failed to change to Auto mode.Unable to start mission: Vehicle failed to change to Guided mode.
- Unable to start mission: Vehicle failed to change to Guided mode.
+ Unable to start mission: Vehicle failed to change to Guided mode.Unable to start mission: Vehicle failed to arm.
- Unable to start mission: Vehicle failed to arm.
+ Unable to start mission: Vehicle failed to arm.Follow failed: Home position not set.
- Follow failed: Home position not set.
+ Follow failed: Home position not set.Follow failed: Ground station cannot provide required position information.
- Follow failed: Ground station cannot provide required position information.
+ Follow failed: Ground station cannot provide required position information.
@@ -498,13 +498,13 @@
Flight Mode Settings
- Flight Mode Settings
+ Flight Mode Settings (Channel 5)
- (Channel 5)
+ (Channel 5)
@@ -594,7 +594,7 @@
Switch Options
- Switch Options
+ Switch Options
@@ -610,7 +610,7 @@
Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
- Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
+ Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
@@ -623,17 +623,17 @@
Simple
- Simple
+ SimpleSuper-Simple
- Super-Simple
+ Super-SimpleCustom
- Custom
+ Custom
@@ -642,37 +642,37 @@
Flight Mode 1
- Flight Mode 1
+ Flight Mode 1Flight Mode 2
- Flight Mode 2
+ Flight Mode 2Flight Mode 3
- Flight Mode 3
+ Flight Mode 3Flight Mode 4
- Flight Mode 4
+ Flight Mode 4Flight Mode 5
- Flight Mode 5
+ Flight Mode 5Flight Mode 6
- Flight Mode 6
+ Flight Mode 6
@@ -681,73 +681,73 @@
Enable Follow Me
- Enable Follow Me
+ Enable Follow MeWaiting for Vehicle to update
- Waiting for Vehicle to update
+ Waiting for Vehicle to updateThe vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results.
- The vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results.
+ The vehicle parameters required for follow me are currently set in a way which is not supported. Using follow with this setup may lead to unpredictable/hazardous results.Reset To Supported Settings
- Reset To Supported Settings
+ Reset To Supported SettingsVehicle Position
- Vehicle Position
+ Vehicle PositionMaintain Current Offsets
- Maintain Current Offsets
+ Maintain Current OffsetsSpecify Offsets
- Specify Offsets
+ Specify OffsetsPoint Vehicle
- Point Vehicle
+ Point VehicleMaintain current vehicle orientation
- Maintain current vehicle orientation
+ Maintain current vehicle orientationPoint at ground station location
- Point at ground station location
+ Point at ground station locationSame direction as ground station movement
- Same direction as ground station movement
+ Same direction as ground station movementVehicle Offsets
- Vehicle Offsets
+ Vehicle Offsets
@@ -771,23 +771,23 @@
Click in the graphic to change angle
- Click in the graphic to change angle
+ Click in the graphic to change angleL
- L
+ LFollow Me
- Follow Me
+ Follow MeFollow Me Setup is used to configure support for the vehicle following the ground station location.
- Follow Me Setup is used to configure support for the vehicle following the ground station location.
+ Follow Me Setup is used to configure support for the vehicle following the ground station location.
@@ -796,25 +796,25 @@
Batt1 monitor
- Batt1 monitor
+ Batt1 monitorBatt1 capacity
- Batt1 capacity
+ Batt1 capacityBatt2 monitor
- Batt2 monitor
+ Batt2 monitorBatt2 capacity
- Batt2 capacity
+ Batt2 capacity
@@ -823,121 +823,121 @@
Servo Setup
- Servo Setup
+ Servo SetupServo
- Servo
+ ServoFunction
- Function
+ FunctionMin
- Min
+ MinMax
- Max
+ MaxTrim
- Trim
+ TrimReversed
- Reversed
+ Reversed1
- 1
+ 12
- 2
+ 23
- 3
+ 34
- 4
+ 45
- 5
+ 56
- 6
+ 67
- 7
+ 78
- 8
+ 8Swashplate Setup
- Swashplate Setup
+ Swashplate SetupThrottle Settings
- Throttle Settings
+ Throttle SettingsGovernor Settings
- Governor Settings
+ Governor SettingsMiscellaneous Settings
- Miscellaneous Settings
+ Miscellaneous Settings* Stabilize Collective Curve *
- * Stabilize Collective Curve *
+ * Stabilize Collective Curve *
@@ -948,17 +948,17 @@
* Tail & Gyros *
- * Tail & Gyros *
+ * Tail & Gyros *Heli
- Heli
+ HeliHeli Setup is used to setup parameters which are specific to a helicopter.
- Heli Setup is used to setup parameters which are specific to a helicopter.
+ Heli Setup is used to setup parameters which are specific to a helicopter.
@@ -967,47 +967,47 @@
Disabled
- Disabled
+ DisabledChannel
- Channel
+ Channel Light Output Channels
- Light Output Channels
+ Light Output ChannelsLights 1:
- Lights 1:
+ Lights 1:Lights 2:
- Lights 2:
+ Lights 2:Brightness Steps:
- Brightness Steps:
+ Brightness Steps:Lights
- Lights
+ LightsLights setup is used to adjust light output channels.
- Lights setup is used to adjust light output channels.
+ Lights setup is used to adjust light output channels.
@@ -1016,79 +1016,79 @@
Disabled
- Disabled
+ DisabledChannel 5
- Channel 5
+ Channel 5Channel 6
- Channel 6
+ Channel 6Channel 7
- Channel 7
+ Channel 7Channel 8
- Channel 8
+ Channel 8Channel 9
- Channel 9
+ Channel 9Channel 10
- Channel 10
+ Channel 10Channel 11
- Channel 11
+ Channel 11Channel 12
- Channel 12
+ Channel 12Channel 13
- Channel 13
+ Channel 13Channel 14
- Channel 14
+ Channel 14Lights Output 1
- Lights Output 1
+ Lights Output 1Lights Output 2
- Lights Output 2
+ Lights Output 2
@@ -1096,37 +1096,37 @@
Motors
- Motors
+ MotorsWarning: Unable to determine motor count
- Warning: Unable to determine motor count
+ Warning: Unable to determine motor countAll
- All
+ AllMoving the sliders will causes the motors to spin. Make sure you remove all props.
- Moving the sliders will causes the motors to spin. Make sure you remove all props.
+ Moving the sliders will causes the motors to spin. Make sure you remove all props.Careful: Motor sliders are enabled
- Careful: Motor sliders are enabled
+ Careful: Motor sliders are enabledPropellers are removed - Enable motor sliders
- Propellers are removed - Enable motor sliders
+ Propellers are removed - Enable motor sliders
@@ -1135,7 +1135,7 @@
Not supported
- Not supported
+ Not supported
@@ -1144,7 +1144,7 @@
Requires vehicle reboot
- Requires vehicle reboot
+ Requires vehicle reboot
@@ -1152,13 +1152,13 @@
Battery 1
- Battery 1
+ Battery 1Battery1 monitor:
- Battery1 monitor:
+ Battery1 monitor:
@@ -1166,7 +1166,7 @@
Reboot vehicle
- Reboot vehicle
+ Reboot vehicle
@@ -1174,157 +1174,157 @@
Battery 2
- Battery 2
+ Battery 2Battery2 monitor:
- Battery2 monitor:
+ Battery2 monitor:ESC Calibration
- ESC Calibration
+ ESC CalibrationWARNING: Remove props prior to calibration!
- WARNING: Remove props prior to calibration!
+ WARNING: Remove props prior to calibration!Calibrate
- Calibrate
+ CalibrateNow perform these steps:
- Now perform these steps:
+ Now perform these steps:Click Calibrate to start, then:
- Click Calibrate to start, then:
+ Click Calibrate to start, then:- Disconnect USB and battery so flight controller powers down
- - Disconnect USB and battery so flight controller powers down
+ - Disconnect USB and battery so flight controller powers down- Connect the battery
- - Connect the battery
+ - Connect the battery- The arming tone will be played (if the vehicle has a buzzer attached)
- - The arming tone will be played (if the vehicle has a buzzer attached)
+ - The arming tone will be played (if the vehicle has a buzzer attached)- If using a flight controller with a safety button press it until it displays solid red
- - If using a flight controller with a safety button press it until it displays solid red
+ - If using a flight controller with a safety button press it until it displays solid red- You will hear a musical tone then two beeps
- - You will hear a musical tone then two beeps
+ - You will hear a musical tone then two beeps- A few seconds later you should hear a number of beeps (one for each battery cell you're using)
- - A few seconds later you should hear a number of beeps (one for each battery cell you're using)
+ - A few seconds later you should hear a number of beeps (one for each battery cell you're using)- And finally a single long beep indicating the end points have been set and the ESC is calibrated
- - And finally a single long beep indicating the end points have been set and the ESC is calibrated
+ - And finally a single long beep indicating the end points have been set and the ESC is calibrated- Disconnect the battery and power up again normally
- - Disconnect the battery and power up again normally
+ - Disconnect the battery and power up again normallyPower Module 90A
- Power Module 90A
+ Power Module 90APower Module HV
- Power Module HV
+ Power Module HV3DR Iris
- 3DR Iris
+ 3DR IrisBlue Robotics Power Sense Module R2
- Blue Robotics Power Sense Module R2
+ Blue Robotics Power Sense Module R2Other
- Other
+ OtherBattery monitor:
- Battery monitor:
+ Battery monitor:Battery capacity:
- Battery capacity:
+ Battery capacity:Minimum arming voltage:
- Minimum arming voltage:
+ Minimum arming voltage:Power sensor:
- Power sensor:
+ Power sensor:Current pin:
- Current pin:
+ Current pin:Voltage pin:
- Voltage pin:
+ Voltage pin:
@@ -1332,7 +1332,7 @@
Voltage multiplier:
- Voltage multiplier:
+ Voltage multiplier:
@@ -1340,19 +1340,19 @@
Calculate
- Calculate
+ CalculateCalculate Voltage Multiplier
- Calculate Voltage Multiplier
+ Calculate Voltage MultiplierIf the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value.
- If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value.
+ If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this. Click the Calculate button for help with calculating a new value.
@@ -1360,49 +1360,49 @@
Amps per volt:
- Amps per volt:
+ Amps per volt:Calculate Amps per Volt
- Calculate Amps per Volt
+ Calculate Amps per VoltIf the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value.
- If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value.
+ If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. Click the Calculate button for help with calculating a new value.Amps Offset:
- Amps Offset:
+ Amps Offset:If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero.
- If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero.
+ If the vehicle reports a high current read when there is little or no current going through it, adjust the Amps Offset. It should be equal to the voltage reported by the sensor when the current is zero.Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier.
- Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier.
+ Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new adjusted voltage multiplier.Measured voltage:
- Measured voltage:
+ Measured voltage:Vehicle voltage:
- Vehicle voltage:
+ Vehicle voltage:
@@ -1410,35 +1410,35 @@
Calculate And Set
- Calculate And Set
+ Calculate And SetMeasure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.
- Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.
+ Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.Measured current:
- Measured current:
+ Measured current:Vehicle current:
- Vehicle current:
+ Vehicle current:Power
- Power
+ PowerThe Power Component is used to setup battery parameters.
- The Power Component is used to setup battery parameters.
+ The Power Component is used to setup battery parameters.
@@ -1447,25 +1447,25 @@
Batt1 monitor
- Batt1 monitor
+ Batt1 monitorBatt1 capacity
- Batt1 capacity
+ Batt1 capacityBatt2 monitor
- Batt2 monitor
+ Batt2 monitorBatt2 capacity
- Batt2 capacity
+ Batt2 capacity
@@ -1473,12 +1473,12 @@
Radio
- Radio
+ RadioThe Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels.
- The Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels.
+ The Radio Component is used to setup which channels on your RC Transmitter you will use for each vehicle control such as Roll, Pitch, Yaw and Throttle. It also allows you to assign switches and dials to the various flight modes. Prior to flight you must also calibrate the extents for all of your channels.
@@ -1487,7 +1487,7 @@
Roll
- Roll
+ Roll
@@ -1499,7 +1499,7 @@
Setup required
- Setup required
+ Setup required
@@ -1511,25 +1511,25 @@
Channel %1
- Channel %1
+ Channel %1Pitch
- Pitch
+ PitchYaw
- Yaw
+ YawThrottle
- Throttle
+ Throttle
@@ -1538,61 +1538,61 @@
Requires vehicle reboot
- Requires vehicle reboot
+ Requires vehicle rebootLow action:
- Low action:
+ Low action:Critical action:
- Critical action:
+ Critical action:Low voltage threshold:
- Low voltage threshold:
+ Low voltage threshold:Critical voltage threshold:
- Critical voltage threshold:
+ Critical voltage threshold:Low mAh threshold:
- Low mAh threshold:
+ Low mAh threshold:Critical mAh threshold:
- Critical mAh threshold:
+ Critical mAh threshold:Reboot vehicle
- Reboot vehicle
+ Reboot vehicleBattery1 Failsafe Triggers
- Battery1 Failsafe Triggers
+ Battery1 Failsafe TriggersBattery2 Failsafe Triggers
- Battery2 Failsafe Triggers
+ Battery2 Failsafe Triggers
@@ -1600,19 +1600,19 @@
Failsafe Triggers
- Failsafe Triggers
+ Failsafe TriggersThrottle PWM threshold:
- Throttle PWM threshold:
+ Throttle PWM threshold:GCS failsafe
- GCS failsafe
+ GCS failsafe
@@ -1620,7 +1620,7 @@
Ground Station failsafe:
- Ground Station failsafe:
+ Ground Station failsafe:
@@ -1628,7 +1628,7 @@
Throttle failsafe:
- Throttle failsafe:
+ Throttle failsafe:
@@ -1636,85 +1636,85 @@
PWM threshold:
- PWM threshold:
+ PWM threshold:Failsafe Crash Check:
- Failsafe Crash Check:
+ Failsafe Crash Check:General Failsafe Triggers
- General Failsafe Triggers
+ General Failsafe TriggersDisabled
- Disabled
+ DisabledAlways RTL
- Always RTL
+ Always RTLContinue with Mission in Auto Mode
- Continue with Mission in Auto Mode
+ Continue with Mission in Auto ModeAlways Land
- Always Land
+ Always LandGeoFence
- GeoFence
+ GeoFenceCircle GeoFence enabled
- Circle GeoFence enabled
+ Circle GeoFence enabledAltitude GeoFence enabled
- Altitude GeoFence enabled
+ Altitude GeoFence enabledReport only
- Report only
+ Report onlyRTL or Land
- RTL or Land
+ RTL or LandMax radius:
- Max radius:
+ Max radius:Max altitude:
- Max altitude:
+ Max altitude:
@@ -1722,7 +1722,7 @@
Return to Launch
- Return to Launch
+ Return to Launch
@@ -1730,7 +1730,7 @@
Return at current altitude
- Return at current altitude
+ Return at current altitude
@@ -1738,52 +1738,52 @@
Return at specified altitude:
- Return at specified altitude:
+ Return at specified altitude:Loiter above Home for:
- Loiter above Home for:
+ Loiter above Home for:Final land stage altitude:
- Final land stage altitude:
+ Final land stage altitude:Final land stage descent speed:
- Final land stage descent speed:
+ Final land stage descent speed:Arming Checks
- Arming Checks
+ Arming ChecksWarning: Turning off arming checks can lead to loss of Vehicle control.
- Warning: Turning off arming checks can lead to loss of Vehicle control.
+ Warning: Turning off arming checks can lead to loss of Vehicle control.Safety
- Safety
+ SafetySafety Setup is used to setup failsafe actions, leak detection, and arming checks.
- Safety Setup is used to setup failsafe actions, leak detection, and arming checks.
+ Safety Setup is used to setup failsafe actions, leak detection, and arming checks.Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself.
- Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself.
+ Safety Setup is used to setup triggers for Return to Land as well as the settings for Return to Land itself.
@@ -1791,151 +1791,151 @@
Battery1 Failsafe Triggers
- Battery1 Failsafe Triggers
+ Battery1 Failsafe TriggersBattery low action:
- Battery low action:
+ Battery low action:Battery critical action:
- Battery critical action:
+ Battery critical action:Voltage threshold:
- Voltage threshold:
+ Voltage threshold:MAH threshold:
- MAH threshold:
+ MAH threshold:Battery2 Failsafe Triggers
- Battery2 Failsafe Triggers
+ Battery2 Failsafe TriggersGeneral Failsafe Triggers
- General Failsafe Triggers
+ General Failsafe TriggersGround Station failsafe:
- Ground Station failsafe:
+ Ground Station failsafe:Throttle failsafe:
- Throttle failsafe:
+ Throttle failsafe:Disabled
- Disabled
+ DisabledAlways RTL
- Always RTL
+ Always RTLContinue with Mission in Auto Mode
- Continue with Mission in Auto Mode
+ Continue with Mission in Auto ModeAlways Land
- Always Land
+ Always LandPWM threshold:
- PWM threshold:
+ PWM threshold:GeoFence
- GeoFence
+ GeoFenceCircle GeoFence enabled
- Circle GeoFence enabled
+ Circle GeoFence enabledAltitude GeoFence enabled
- Altitude GeoFence enabled
+ Altitude GeoFence enabledReport only
- Report only
+ Report onlyRTL or Land
- RTL or Land
+ RTL or LandMax radius:
- Max radius:
+ Max radius:Max altitude:
- Max altitude:
+ Max altitude:Return to Launch
- Return to Launch
+ Return to LaunchReturn at current altitude
- Return at current altitude
+ Return at current altitudeReturn at specified altitude:
- Return at specified altitude:
+ Return at specified altitude:Loiter above Home for:
- Loiter above Home for:
+ Loiter above Home for:Land with descent speed:
- Land with descent speed:
+ Land with descent speed:Final loiter altitude:
- Final loiter altitude:
+ Final loiter altitude:Arming Checks
- Arming Checks
+ Arming ChecksWarning: Turning off arming checks can lead to loss of Vehicle control.
- Warning: Turning off arming checks can lead to loss of Vehicle control.
+ Warning: Turning off arming checks can lead to loss of Vehicle control.
@@ -1943,42 +1943,42 @@
Failsafe Triggers
- Failsafe Triggers
+ Failsafe TriggersThrottle PWM threshold:
- Throttle PWM threshold:
+ Throttle PWM threshold:Voltage threshold:
- Voltage threshold:
+ Voltage threshold:MAH threshold:
- MAH threshold:
+ MAH threshold:GCS failsafe
- GCS failsafe
+ GCS failsafeReturn to Launch
- Return to Launch
+ Return to LaunchReturn at current altitude
- Return at current altitude
+ Return at current altitudeReturn at specified altitude:
- Return at specified altitude:
+ Return at specified altitude:
@@ -1986,52 +1986,52 @@
Failsafe Triggers
- Failsafe Triggers
+ Failsafe TriggersGround Station failsafe:
- Ground Station failsafe:
+ Ground Station failsafe:Throttle failsafe:
- Throttle failsafe:
+ Throttle failsafe:PWM threshold:
- PWM threshold:
+ PWM threshold:Failsafe Crash Check:
- Failsafe Crash Check:
+ Failsafe Crash Check:Disabled
- Disabled
+ DisabledHold
- Hold
+ HoldHold and Disarm
- Hold and Disarm
+ Hold and DisarmArming Checks
- Arming Checks
+ Arming ChecksWarning: Turning off arming checks can lead to loss of Vehicle control.
- Warning: Turning off arming checks can lead to loss of Vehicle control.
+ Warning: Turning off arming checks can lead to loss of Vehicle control.
@@ -2040,79 +2040,79 @@
Failsafe Actions
- Failsafe Actions
+ Failsafe ActionsGCS Heartbeat:
- GCS Heartbeat:
+ GCS Heartbeat:Leak:
- Leak:
+ Leak:Detector Pin:
- Detector Pin:
+ Detector Pin:Logic when Dry:
- Logic when Dry:
+ Logic when Dry:Battery:
- Battery:
+ Battery:Voltage:
- Voltage:
+ Voltage:Remaining Capacity:
- Remaining Capacity:
+ Remaining Capacity:EKF:
- EKF:
+ EKF:Pilot Input:
- Pilot Input:
+ Pilot Input:Timeout:
- Timeout:
+ Timeout:Internal Temperature:
- Internal Temperature:
+ Internal Temperature:Internal Pressure:
- Internal Pressure:
+ Internal Pressure:
@@ -2120,19 +2120,19 @@
Threshold:
- Threshold:
+ Threshold:Arming Checks
- Arming Checks
+ Arming ChecksWarning: Turning off arming checks can lead to loss of Vehicle control.
- Warning: Turning off arming checks can lead to loss of Vehicle control.
+ Warning: Turning off arming checks can lead to loss of Vehicle control.
@@ -2141,19 +2141,19 @@
Arming Checks:
- Arming Checks:
+ Arming Checks:Enabled
- Enabled
+ EnabledSome disabled
- Some disabled
+ Some disabled
@@ -2163,43 +2163,43 @@
Throttle failsafe:
- Throttle failsafe:
+ Throttle failsafe:Failsafe Action:
- Failsafe Action:
+ Failsafe Action:Failsafe Crash Check:
- Failsafe Crash Check:
+ Failsafe Crash Check:Batt1 low failsafe:
- Batt1 low failsafe:
+ Batt1 low failsafe:Batt1 critical failsafe:
- Batt1 critical failsafe:
+ Batt1 critical failsafe:Batt2 low failsafe:
- Batt2 low failsafe:
+ Batt2 low failsafe:Batt2 critical failsafe:
- Batt2 critical failsafe:
+ Batt2 critical failsafe:
@@ -2207,49 +2207,49 @@
GeoFence:
- GeoFence:
+ GeoFence:Disabled
- Disabled
+ DisabledAltitude
- Altitude
+ AltitudeCircle
- Circle
+ CircleAltitude,Circle
- Altitude,Circle
+ Altitude,CircleReport only
- Report only
+ Report onlyRTL or Land
- RTL or Land
+ RTL or LandUnknown
- Unknown
+ Unknown
@@ -2257,7 +2257,7 @@
RTL min alt:
- RTL min alt:
+ RTL min alt:
@@ -2265,7 +2265,7 @@
current
- current
+ current
@@ -2273,93 +2273,93 @@
Arming Checks:
- Arming Checks:
+ Arming Checks:Enabled
- Enabled
+ EnabledSome disabled
- Some disabled
+ Some disabledThrottle failsafe:
- Throttle failsafe:
+ Throttle failsafe:Batt1 low failsafe:
- Batt1 low failsafe:
+ Batt1 low failsafe:Batt1 critical failsafe:
- Batt1 critical failsafe:
+ Batt1 critical failsafe:Batt2 low failsafe:
- Batt2 low failsafe:
+ Batt2 low failsafe:Batt2 critical failsafe:
- Batt2 critical failsafe:
+ Batt2 critical failsafe:GeoFence:
- GeoFence:
+ GeoFence:Disabled
- Disabled
+ DisabledAltitude
- Altitude
+ AltitudeCircle
- Circle
+ CircleAltitude,Circle
- Altitude,Circle
+ Altitude,CircleReport only
- Report only
+ Report onlyRTL or Land
- RTL or Land
+ RTL or LandUnknown
- Unknown
+ UnknownRTL min alt:
- RTL min alt:
+ RTL min alt:current
- current
+ current
@@ -2367,34 +2367,34 @@
Throttle failsafe:
- Throttle failsafe:
+ Throttle failsafe:Disabled
- Disabled
+ DisabledVoltage failsafe:
- Voltage failsafe:
+ Voltage failsafe:mAh failsafe:
- mAh failsafe:
+ mAh failsafe:RTL min alt:
- RTL min alt:
+ RTL min alt:current
- current
+ current
@@ -2404,63 +2404,63 @@
Disabled
- Disabled
+ DisabledAlways RTL
- Always RTL
+ Always RTLAlways Hold
- Always Hold
+ Always HoldUnknown
- Unknown
+ UnknownHold
- Hold
+ HoldHold and Disarm
- Hold and Disarm
+ Hold and DisarmArming Checks:
- Arming Checks:
+ Arming Checks:Enabled
- Enabled
+ EnabledSome disabled
- Some disabled
+ Some disabledThrottle failsafe:
- Throttle failsafe:
+ Throttle failsafe:Failsafe Action:
- Failsafe Action:
+ Failsafe Action:Failsafe Crash Check:
- Failsafe Crash Check:
+ Failsafe Crash Check:
@@ -2469,61 +2469,61 @@
Arming Checks:
- Arming Checks:
+ Arming Checks:Enabled
- Enabled
+ EnabledSome disabled
- Some disabled
+ Some disabledGCS failsafe:
- GCS failsafe:
+ GCS failsafe:Leak failsafe:
- Leak failsafe:
+ Leak failsafe:Battery failsafe:
- Battery failsafe:
+ Battery failsafe:EKF failsafe:
- EKF failsafe:
+ EKF failsafe:Pilot Input failsafe:
- Pilot Input failsafe:
+ Pilot Input failsafe:Int. Temperature failsafe:
- Int. Temperature failsafe:
+ Int. Temperature failsafe:Int. Pressure failsafe:
- Int. Pressure failsafe:
+ Int. Pressure failsafe:
@@ -2532,61 +2532,61 @@
If mounted in the direction of flight, select None.
- If mounted in the direction of flight, select None.
+ If mounted in the direction of flight, select None.Before calibrating make sure rotation settings are correct.
- Before calibrating make sure rotation settings are correct.
+ Before calibrating make sure rotation settings are correct. If the compass or GPS module is mounted in flight direction, leave the default value (None)
- If the compass or GPS module is mounted in flight direction, leave the default value (None)
+ If the compass or GPS module is mounted in flight direction, leave the default value (None)For Compass calibration you will need to rotate your vehicle through a number of positions.
- For Compass calibration you will need to rotate your vehicle through a number of positions.
+ For Compass calibration you will need to rotate your vehicle through a number of positions.For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
- For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
+ For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.
- For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.
+ For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.To level the horizon you need to place the vehicle in its level flight position and press OK.
- To level the horizon you need to place the vehicle in its level flight position and press OK.
+ To level the horizon you need to place the vehicle in its level flight position and press OK.Start the individual calibration steps by clicking one of the buttons to the left.
- Start the individual calibration steps by clicking one of the buttons to the left.
+ Start the individual calibration steps by clicking one of the buttons to the left.The calibration for Compass %1 appears to be poor.
- The calibration for Compass %1 appears to be poor.
+ The calibration for Compass %1 appears to be poor. Check the compass position within your vehicle and re-do the calibration.
- Check the compass position within your vehicle and re-do the calibration.
+ Check the compass position within your vehicle and re-do the calibration.
@@ -2594,13 +2594,13 @@
Calibrate Compass
- Calibrate Compass
+ Calibrate CompassCalibrate Accelerometer
- Calibrate Accelerometer
+ Calibrate Accelerometer
@@ -2608,55 +2608,55 @@
Sensor Settings
- Sensor Settings
+ Sensor SettingsCalibration Cancel
- Calibration Cancel
+ Calibration CancelAccelerometer calibration complete
- Accelerometer calibration complete
+ Accelerometer calibration completeCompass calibration complete
- Compass calibration complete
+ Compass calibration completeCalibration complete
- Calibration complete
+ Calibration completeWaiting for Vehicle to response to Cancel. This may take a few seconds.
- Waiting for Vehicle to response to Cancel. This may take a few seconds.
+ Waiting for Vehicle to response to Cancel. This may take a few seconds.(primary
- (primary
+ (primary(secondary
- (secondary
+ (secondaryUse Compass
- Use Compass
+ Use Compass
@@ -2664,7 +2664,7 @@
Shown in the indicator bars is the quality of the calibration for each compass.
- Shown in the indicator bars is the quality of the calibration for each compass.
+ Shown in the indicator bars is the quality of the calibration for each compass.
@@ -2672,32 +2672,32 @@
Compass %1
- Compass %1
+ Compass %1 ,
- ,
+ , external
- external
+ externalinternal
- internal
+ internal- Green indicates a well functioning compass.
- - Green indicates a well functioning compass.
+ - Green indicates a well functioning compass.
@@ -2705,7 +2705,7 @@
- Yellow indicates a questionable compass or calibration.
- - Yellow indicates a questionable compass or calibration.
+ - Yellow indicates a questionable compass or calibration.
@@ -2714,7 +2714,7 @@
- Red indicates a compass which should not be used.
- - Red indicates a compass which should not be used.
+ - Red indicates a compass which should not be used.
@@ -2724,7 +2724,7 @@
YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION.
- YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION.
+ YOU MUST REBOOT YOUR VEHICLE AFTER EACH CALIBRATION.
@@ -2732,133 +2732,133 @@
Reboot Vehicle
- Reboot Vehicle
+ Reboot VehiclePriority 1
- Priority 1
+ Priority 1Priority 2
- Priority 2
+ Priority 2Priority 3
- Priority 3
+ Priority 3Not Set
- Not Set
+ Not SetOrientation:
- Orientation:
+ Orientation:Autopilot Rotation:
- Autopilot Rotation:
+ Autopilot Rotation:Magnetic Declination
- Magnetic Declination
+ Magnetic DeclinationManual Magnetic Declination
- Manual Magnetic Declination
+ Manual Magnetic DeclinationThis is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc.
- This is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc.
+ This is recommended for vehicles that have only an internal compass and on vehicles where there is significant interference on the compass from the motors, power wires, etc. CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn.
- CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn.
+ CompassMot only works well if you have a battery current monitor because the magnetic interference is linear with current drawn. It is technically possible to set-up CompassMot using throttle but this is not recommended.
- It is technically possible to set-up CompassMot using throttle but this is not recommended.
+ It is technically possible to set-up CompassMot using throttle but this is not recommended.Disconnect your props, flip them over and rotate them one position around the frame.
- Disconnect your props, flip them over and rotate them one position around the frame.
+ Disconnect your props, flip them over and rotate them one position around the frame. In this configuration they should push the copter down into the ground when the throttle is raised.
- In this configuration they should push the copter down into the ground when the throttle is raised.
+ In this configuration they should push the copter down into the ground when the throttle is raised.Secure the copter (perhaps with tape) so that it does not move.
- Secure the copter (perhaps with tape) so that it does not move.
+ Secure the copter (perhaps with tape) so that it does not move.Turn on your transmitter and keep throttle at zero.
- Turn on your transmitter and keep throttle at zero.
+ Turn on your transmitter and keep throttle at zero.Click Ok to start CompassMot calibration.
- Click Ok to start CompassMot calibration.
+ Click Ok to start CompassMot calibration.To level the horizon you need to place the vehicle in its level flight position and press Ok.
- To level the horizon you need to place the vehicle in its level flight position and press Ok.
+ To level the horizon you need to place the vehicle in its level flight position and press Ok.depth
- depth
+ depthaltitude
- altitude
+ altitudePressure calibration will set the %1 to zero at the current pressure reading. %2
- Pressure calibration will set the %1 to zero at the current pressure reading. %2
+ Pressure calibration will set the %1 to zero at the current pressure reading. %2To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration.
- To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration.
+ To calibrate the airspeed sensor shield it from the wind. Do not touch the sensor or obstruct any holes during the calibration.
@@ -2866,7 +2866,7 @@
For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
Click Ok to start calibration.
- For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
+ For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
Click Ok to start calibration.
@@ -2874,79 +2874,79 @@ Click Ok to start calibration.
Accelerometer
- Accelerometer
+ AccelerometerCompass
- Compass
+ CompassAccelerometer must be calibrated prior to Compass.
- Accelerometer must be calibrated prior to Compass.
+ Accelerometer must be calibrated prior to Compass.Level Horizon
- Level Horizon
+ Level HorizonAccelerometer must be calibrated prior to Level Horizon.
- Accelerometer must be calibrated prior to Level Horizon.
+ Accelerometer must be calibrated prior to Level Horizon.Gyro
- Gyro
+ GyroCalibrate Gyro
- Calibrate Gyro
+ Calibrate GyroBaro/Airspeed
- Baro/Airspeed
+ Baro/AirspeedPressure
- Pressure
+ PressureCompassMot
- CompassMot
+ CompassMotCompassMot - Compass Motor Interference Calibration
- CompassMot - Compass Motor Interference Calibration
+ CompassMot - Compass Motor Interference CalibrationNext
- Next
+ NextCancel
- Cancel
+ Cancel
@@ -2962,7 +2962,7 @@ Click Ok to start calibration.
Rotate
- Rotate
+ Rotate
@@ -2978,17 +2978,17 @@ Click Ok to start calibration.
Hold Still
- Hold Still
+ Hold StillSensors
- Sensors
+ SensorsSensors Setup is used to calibrate the sensors within your vehicle.
- Sensors Setup is used to calibrate the sensors within your vehicle.
+ Sensors Setup is used to calibrate the sensors within your vehicle.
@@ -2996,97 +2996,97 @@ Click Ok to start calibration.
Calibration complete
- Calibration complete
+ Calibration completeCalibration failed. Calibration log will be displayed.
- Calibration failed. Calibration log will be displayed.
+ Calibration failed. Calibration log will be displayed.Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right .
- Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right .
+ Rotate the vehicle randomly around all axes until the progress bar fills all the way to the right .Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds.
- Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds.
+ Raise the throttle slowly to between 50% ~ 75% (the props will spin!) for 5 ~ 10 seconds.Quickly bring the throttle back down to zero
- Quickly bring the throttle back down to zero
+ Quickly bring the throttle back down to zeroPress the Next button to complete the calibration
- Press the Next button to complete the calibration
+ Press the Next button to complete the calibrationHold the vehicle in its level flight position.
- Hold the vehicle in its level flight position.
+ Hold the vehicle in its level flight position.Requesting pressure calibration...
- Requesting pressure calibration...
+ Requesting pressure calibration...Requesting gyro calibration...
- Requesting gyro calibration...
+ Requesting gyro calibration...Successfully completed
- Successfully completed
+ Successfully completedFailed
- Failed
+ FailedHold still in the current orientation and press Next when ready
- Hold still in the current orientation and press Next when ready
+ Hold still in the current orientation and press Next when readyCompass %1 calibration complete
- Compass %1 calibration complete
+ Compass %1 calibration completeCompass %1 calibration below quality threshold
- Compass %1 calibration below quality threshold
+ Compass %1 calibration below quality thresholdAll compasses calibrated successfully
- All compasses calibrated successfully
+ All compasses calibrated successfullyYOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECT
- YOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECT
+ YOU MUST REBOOT YOUR VEHICLE NOW FOR NEW SETTINGS TO TAKE AFFECTCompass calibration failed
- Compass calibration failed
+ Compass calibration failedYOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHT
- YOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHT
+ YOU MUST REBOOT YOUR VEHICLE NOW AND RETRY COMPASS CALIBRATION PRIOR TO FLIGHTContinue rotating...
- Continue rotating...
+ Continue rotating...
@@ -3095,7 +3095,7 @@ Click Ok to start calibration.
Compass
- Compass
+ Compass
@@ -3103,25 +3103,25 @@ Click Ok to start calibration.
Setup required
- Setup required
+ Setup requiredNot installed
- Not installed
+ Not installedAccelerometer(s)
- Accelerometer(s)
+ Accelerometer(s)Ready
- Ready
+ Ready
@@ -3129,48 +3129,48 @@ Click Ok to start calibration.
Frame
- Frame
+ FrameFrame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available.
- Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available.
+ Frame setup allows you to choose your vehicle's motor configuration. Install <b>clockwise</b><br>propellers on the <b>green thrusters</b> and <b>counter-clockwise</b> propellers on the <b>blue thrusters</b><br>(or vice-versa). The flight controller will need to be rebooted to apply changes.<br>When selecting a frame, you can choose to load the default parameter set for that frame configuration if available.Frame selection
- Frame selection
+ Frame selectionWould you like to load the default parameters for the frame ?
- Would you like to load the default parameters for the frame ?
+ Would you like to load the default parameters for the frame ?Would you like to set the desired frame ?
- Would you like to set the desired frame ?
+ Would you like to set the desired frame ?Yes, Load default parameter set for %1
- Yes, Load default parameter set for %1
+ Yes, Load default parameter set for %1No, set frame only
- No, set frame only
+ No, set frame onlyConfirm frame %1
- Confirm frame %1
+ Confirm frame %1
@@ -3179,13 +3179,13 @@ Click Ok to start calibration.
Frame Type
- Frame Type
+ Frame TypeFirmware Version
- Firmware Version
+ Firmware Version
@@ -3193,13 +3193,13 @@ Click Ok to start calibration.
Unknown
- Unknown
+ UnknownGit Revision
- Git Revision
+ Git Revision
@@ -3208,7 +3208,7 @@ Click Ok to start calibration.
Reverse Motor Direction
- Reverse Motor Direction
+ Reverse Motor Direction
@@ -3216,7 +3216,7 @@ Click Ok to start calibration.
Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster.
Blue Robotics thrusters are lubricated by water and are not designed to be run in air. Testing the thrusters in air is ok at low speeds for short periods of time. Extended operation of Blue Robotics in air may lead to overheating and permanent damage. Without water lubrication, Blue Robotics thrusters may also make some unpleasant noises when operated in air; this is normal.
- Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster.
+ Moving the sliders will cause the motors to spin. Make sure the motors and propellers are clear from obstructions! The direction of the motor rotation is dependent on how the three phases of the motor are physically connected to the ESCs (if any two wires are swapped, the direction of rotation will flip). Because we cannot guarantee what order the phases are connected, the motor directions must be configured in software. When a slider is moved DOWN, the thruster should push air/water TOWARD the cable entering the housing. Click the checkbox to reverse the direction of the corresponding thruster.
Blue Robotics thrusters are lubricated by water and are not designed to be run in air. Testing the thrusters in air is ok at low speeds for short periods of time. Extended operation of Blue Robotics in air may lead to overheating and permanent damage. Without water lubrication, Blue Robotics thrusters may also make some unpleasant noises when operated in air; this is normal.
@@ -3224,26 +3224,26 @@ Blue Robotics thrusters are lubricated by water and are not designed to be run i
A 10 second coooldown is required before testing again, please stand by...
- A 10 second coooldown is required before testing again, please stand by...
+ A 10 second coooldown is required before testing again, please stand by...Slide this switch to arm the vehicle and enable the motor test (CAUTION!)
- Slide this switch to arm the vehicle and enable the motor test (CAUTION!)
+ Slide this switch to arm the vehicle and enable the motor test (CAUTION!)Automatic Motor Direction Detection
- Automatic Motor Direction Detection
+ Automatic Motor Direction DetectionThis will attempt to automatically detect the direction (normal/reversed) of your thrusters.
Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example).
- This will attempt to automatically detect the direction (normal/reversed) of your thrusters.
+ This will attempt to automatically detect the direction (normal/reversed) of your thrusters.
Please place your vehicle in water, click the button, and wait. Note that the thrusters still need to be connected to the correct outputs (thrusters 2 and 3 can't be swapped, for example).
@@ -3252,12 +3252,12 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Tuning
- Tuning
+ TuningTuning Setup is used to tune the flight characteristics of the Vehicle.
- Tuning Setup is used to tune the flight characteristics of the Vehicle.
+ Tuning Setup is used to tune the flight characteristics of the Vehicle.
@@ -3266,175 +3266,175 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Basic Tuning
- Basic Tuning
+ Basic TuningRoll/Pitch Sensitivity
- Roll/Pitch Sensitivity
+ Roll/Pitch SensitivitySlide to the right if the copter is sluggish or slide to the left if the copter is twitchy
- Slide to the right if the copter is sluggish or slide to the left if the copter is twitchy
+ Slide to the right if the copter is sluggish or slide to the left if the copter is twitchyClimb Sensitivity
- Climb Sensitivity
+ Climb SensitivitySlide to the right to climb more aggressively or slide to the left to climb more gently
- Slide to the right to climb more aggressively or slide to the left to climb more gently
+ Slide to the right to climb more aggressively or slide to the left to climb more gentlyRC Roll/Pitch Feel
- RC Roll/Pitch Feel
+ RC Roll/Pitch FeelSlide to the left for soft control, slide to the right for crisp control
- Slide to the left for soft control, slide to the right for crisp control
+ Slide to the left for soft control, slide to the right for crisp controlSpin While Armed
- Spin While Armed
+ Spin While ArmedAdjust the amount the motors spin to indicate armed
- Adjust the amount the motors spin to indicate armed
+ Adjust the amount the motors spin to indicate armedMinimum Thrust
- Minimum Thrust
+ Minimum ThrustAdjust the minimum amount of thrust require for the vehicle to move
- Adjust the minimum amount of thrust require for the vehicle to move
+ Adjust the minimum amount of thrust require for the vehicle to moveWarning: This setting should be higher than 'Spin While Armed'
- Warning: This setting should be higher than 'Spin While Armed'
+ Warning: This setting should be higher than 'Spin While Armed'AutoTune
- AutoTune
+ AutoTuneAxes to AutoTune:
- Axes to AutoTune:
+ Axes to AutoTune:Channel for AutoTune switch:
- Channel for AutoTune switch:
+ Channel for AutoTune switch:None
- None
+ NoneChannel 7
- Channel 7
+ Channel 7Channel 8
- Channel 8
+ Channel 8Channel 9
- Channel 9
+ Channel 9Channel 10
- Channel 10
+ Channel 10Channel 11
- Channel 11
+ Channel 11Channel 12
- Channel 12
+ Channel 12In Flight Tuning
- In Flight Tuning
+ In Flight TuningRC Channel 6 Option (Tuning):
- RC Channel 6 Option (Tuning):
+ RC Channel 6 Option (Tuning):Min:
- Min:
+ Min:Max:
- Max:
+ Max:Roll
- Roll
+ RollPitch
- Pitch
+ PitchYaw
- Yaw
+ Yaw
@@ -3443,19 +3443,19 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Attitude Controller Parameters
- Attitude Controller Parameters
+ Attitude Controller ParametersPosition Controller Parameters
- Position Controller Parameters
+ Position Controller ParametersWaypoint navigation parameters
- Waypoint navigation parameters
+ Waypoint navigation parameters
@@ -3463,17 +3463,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th
AirMap Enabled
- AirMap Enabled
+ AirMap EnabledFailed to create airmap::services::Client instance
- Failed to create airmap::services::Client instance
+ Failed to create airmap::services::Client instanceNo API key for AirMap
- No API key for AirMap
+ No API key for AirMap
@@ -3482,7 +3482,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Your vehicle is using a custom airframe configuration.
- Your vehicle is using a custom airframe configuration.
+ Your vehicle is using a custom airframe configuration.
@@ -3490,7 +3490,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
This configuration can only be modified through the Parameter Editor.
- This configuration can only be modified through the Parameter Editor.
+ This configuration can only be modified through the Parameter Editor.
@@ -3498,37 +3498,37 @@ Please place your vehicle in water, click the button, and wait. Note that the th
If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below.
- If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below.
+ If you want to reset your airframe configuration and select a standard configuration, click 'Reset' below.Reset
- Reset
+ ResetClicking 'Apply' will save the changes you have made to your airframe configuration.<br><br>All vehicle parameters other than Radio Calibration will be reset.<br><br>Your vehicle will also be restarted in order to complete the process.
- Clicking 'Apply' will save the changes you have made to your airframe configuration.<br><br>All vehicle parameters other than Radio Calibration will be reset.<br><br>Your vehicle will also be restarted in order to complete the process.
+ Clicking 'Apply' will save the changes you have made to your airframe configuration.<br><br>All vehicle parameters other than Radio Calibration will be reset.<br><br>Your vehicle will also be restarted in order to complete the process.To change this configuration, select the desired airframe below then click 'Apply and Restart'.
- To change this configuration, select the desired airframe below then click 'Apply and Restart'.
+ To change this configuration, select the desired airframe below then click 'Apply and Restart'.You've connected a %1.
- You've connected a %1.
+ You've connected a %1.Airframe is not set.
- Airframe is not set.
+ Airframe is not set.
@@ -3536,17 +3536,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Apply and Restart
- Apply and Restart
+ Apply and RestartAirframe
- Airframe
+ AirframeAirframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters.
- Airframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters.
+ Airframe Setup is used to select the airframe that matches your vehicle. This will in turn set up the various tuning values for flight parameters.
@@ -3554,7 +3554,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
You cannot change airframe configuration while connected to multiple vehicles.
- You cannot change airframe configuration while connected to multiple vehicles.
+ You cannot change airframe configuration while connected to multiple vehicles.
@@ -3563,13 +3563,13 @@ Please place your vehicle in water, click the button, and wait. Note that the th
System ID
- System ID
+ System IDAirframe type
- Airframe type
+ Airframe type
@@ -3577,31 +3577,31 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Setup required
- Setup required
+ Setup requiredVehicle
- Vehicle
+ VehicleFirmware Version
- Firmware Version
+ Firmware VersionUnknown
- Unknown
+ UnknownCustom Fw. Ver.
- Custom Fw. Ver.
+ Custom Fw. Ver.
@@ -3609,60 +3609,60 @@ Please place your vehicle in water, click the button, and wait. Note that the th
General
- General
+ GeneralEnable AirMap Services
- Enable AirMap Services
+ Enable AirMap ServicesEnable Telemetry
- Enable Telemetry
+ Enable TelemetryShow Airspace on Map (Experimental)
- Show Airspace on Map (Experimental)
+ Show Airspace on Map (Experimental)Clear Saved Answers
- Clear Saved Answers
+ Clear Saved AnswersAll saved ruleset answers will be cleared. Is this really what you want?
- All saved ruleset answers will be cleared. Is this really what you want?
+ All saved ruleset answers will be cleared. Is this really what you want?Connection Status
- Connection Status
+ Connection StatusConnected
- Connected
+ ConnectedNot Connected
- Not Connected
+ Not ConnectedLogin / Registration
- Login / Registration
+ Login / RegistrationUser Name:
- User Name:
+ User Name:
@@ -3672,212 +3672,212 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Anonymous
- Anonymous
+ AnonymousAuthenticated
- Authenticated
+ AuthenticatedAuthentication Error
- Authentication Error
+ Authentication ErrorPassword:
- Password:
+ Password:Forgot Your AirMap Password?
- Forgot Your AirMap Password?
+ Forgot Your AirMap Password?Register for an AirMap Account
- Register for an AirMap Account
+ Register for an AirMap AccountPilot Profile (WIP)
- Pilot Profile (WIP)
+ Pilot Profile (WIP)Name:
- Name:
+ Name:John Doe
- John Doe
+ John Doejoe36
- joe36
+ joe36Email:
- Email:
+ Email:jonh@doe.com
- jonh@doe.com
+ jonh@doe.comPhone:
- Phone:
+ Phone:+1 212 555 1212
- +1 212 555 1212
+ +1 212 555 1212License
- License
+ LicensePersonal API Key
- Personal API Key
+ Personal API KeyAPI Key:
- API Key:
+ API Key:Client ID:
- Client ID:
+ Client ID:Flight List Management
- Flight List Management
+ Flight List ManagementShow Flight List
- Show Flight List
+ Show Flight ListNo
- No
+ NoCreated
- Created
+ CreatedFlight Start
- Flight Start
+ Flight StartFlight End
- Flight End
+ Flight EndState
- State
+ StateActive
- Active
+ ActiveCompleted
- Completed
+ CompletedUnknown
- Unknown
+ UnknownLoading Flight List
- Loading Flight List
+ Loading Flight ListFlight List
- Flight List
+ Flight ListRange
- Range
+ RangeFrom
- From
+ FromTo
- To
+ ToRefresh
- Refresh
+ RefreshEnd Selected
- End Selected
+ End SelectedEnd Flight
- End Flight
+ End FlightConfirm ending active flight?
- Confirm ending active flight?
+ Confirm ending active flight?Close
- Close
+ Close Flights Loaded
- Flights Loaded
+ Flights LoadedNo Flights Loaded
- No Flights Loaded
+ No Flights LoadedA maximum of 250 flights were loaded
- A maximum of 250 flights were loaded
+ A maximum of 250 flights were loadedFlight Area
- Flight Area
+ Flight Area
@@ -3885,77 +3885,77 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Airport
- Airport
+ AirportControlled Airspace
- Controlled Airspace
+ Controlled AirspaceSpecial Use Airspace
- Special Use Airspace
+ Special Use AirspaceTFR
- TFR
+ TFRWild Fire
- Wild Fire
+ Wild FirePark
- Park
+ ParkPower Plant
- Power Plant
+ Power PlantHeliport
- Heliport
+ HeliportPrison
- Prison
+ PrisonSchool
- School
+ SchoolHospital
- Hospital
+ HospitalFire
- Fire
+ FireEmergency
- Emergency
+ EmergencyCustom
- Custom
+ CustomUnknown
- Unknown
+ Unknown
@@ -3964,68 +3964,68 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Airspace
- Airspace
+ Airspace Advisories
- Advisories
+ AdvisoriesNot Connected
- Not Connected
+ Not ConnectedAirspace Regulations
- Airspace Regulations
+ Airspace RegulationsAdvisories based on the selected rules.
- Advisories based on the selected rules.
+ Advisories based on the selected rules.None
- None
+ NoneFile Flight Plan
- File Flight Plan
+ File Flight PlanFlight Brief
- Flight Brief
+ Flight BriefPowered by <b>AIRMAP</b>
- Powered by <b>AIRMAP</b>
+ Powered by <b>AIRMAP</b>Airspace Regulation Options
- Airspace Regulation Options
+ Airspace Regulation OptionsPICK ONE REGULATION
- PICK ONE REGULATION
+ PICK ONE REGULATIONOPTIONAL
- OPTIONAL
+ OPTIONALREQUIRED
- REQUIRED
+ REQUIRED
@@ -4033,57 +4033,57 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Select Altitude Mode
- Select Altitude Mode
+ Select Altitude ModeRelative To Launch
- Relative To Launch
+ Relative To LaunchSpecified altitudes are relative to launch position height.
- Specified altitudes are relative to launch position height.
+ Specified altitudes are relative to launch position height.AMSL
- AMSL
+ AMSLSpecified altitudes are Above Mean Sea Level.
- Specified altitudes are Above Mean Sea Level.
+ Specified altitudes are Above Mean Sea Level.Calculated Above Terrain
- Calculated Above Terrain
+ Calculated Above TerrainSpecified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values.
- Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values.
+ Specified altitudes are distance above terrain. Actual altitudes sent to vehicle are calculated from terrain data and sent as AMSL values.Terrain Frame
- Terrain Frame
+ Terrain FrameSpecified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor.
- Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor.
+ Specified altitudes are distance above terrain. The actual altitude flown is controlled by the vehicle either from terrain height maps being sent to vehicle or a distance sensor.Mixed Modes
- Mixed Modes
+ Mixed ModesThe altitude mode can differ for each individual item.
- The altitude mode can differ for each individual item.
+ The altitude mode can differ for each individual item.
@@ -4091,7 +4091,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Open console log output file failed %1 : %2
- Open console log output file failed %1 : %2
+ Open console log output file failed %1 : %2
@@ -4099,57 +4099,57 @@ Please place your vehicle in water, click the button, and wait. Note that the th
GStreamer Debug Level
- GStreamer Debug Level
+ GStreamer Debug LevelLogging categories
- Logging categories
+ Logging categoriesSearch:
- Search:
+ Search:Clear
- Clear
+ ClearClear All
- Clear All
+ Clear AllLog files (*.txt)
- Log files (*.txt)
+ Log files (*.txt)All Files (*)
- All Files (*)
+ All Files (*)Select log save file
- Select log save file
+ Select log save fileSave App Log
- Save App Log
+ Save App LogShow Latest
- Show Latest
+ Show LatestSet Logging
- Set Logging
+ Set Logging
@@ -4157,47 +4157,47 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Parameters
- Parameters
+ ParametersTelemetry
- Telemetry
+ TelemetryMissions
- Missions
+ MissionsLogs
- Logs
+ LogsVideo
- Video
+ VideoPhoto
- Photo
+ PhotoCrashLogs
- CrashLogs
+ CrashLogs (Partial)
- (Partial)
+ (Partial) (Test only)
- (Test only)
+ (Test only)
@@ -4205,22 +4205,22 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Armed
- Armed
+ ArmedDisarmed
- Disarmed
+ DisarmedArm
- Arm
+ ArmDisarm
- Disarm
+ Disarm
@@ -4228,17 +4228,17 @@ Please place your vehicle in water, click the button, and wait. Note that the th
negative
- negative
+ negative point
- point
+ point meters
- meters
+ meters
@@ -4246,7 +4246,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
One or more vehicle components require setup prior to flight.
- One or more vehicle components require setup prior to flight.
+ One or more vehicle components require setup prior to flight.
@@ -4254,72 +4254,72 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Autotune: In progress
- Autotune: In progress
+ Autotune: In progressAutotune: initializing
- Autotune: initializing
+ Autotune: initializingAutotune: roll
- Autotune: roll
+ Autotune: rollAutotune: pitch
- Autotune: pitch
+ Autotune: pitchAutotune: yaw
- Autotune: yaw
+ Autotune: yawWait for disarm
- Wait for disarm
+ Wait for disarmLand and disarm the vehicle in order to apply the parameters.
- Land and disarm the vehicle in order to apply the parameters.
+ Land and disarm the vehicle in order to apply the parameters.Autotune: in progress
- Autotune: in progress
+ Autotune: in progressAutotune: Success
- Autotune: Success
+ Autotune: SuccessAutotune successful.
- Autotune successful.
+ Autotune successful.Autotune: Unknown error
- Autotune: Unknown error
+ Autotune: Unknown errorAutotune: Failed
- Autotune: Failed
+ Autotune: FailedAutotune: Ack error %1
- Autotune: Ack error %1
+ Autotune: Ack error %1Autotune: Not performed
- Autotune: Not performed
+ Autotune: Not performed
@@ -4327,7 +4327,7 @@ Please place your vehicle in water, click the button, and wait. Note that the th
Autotune
- Autotune
+ Autotune
@@ -4342,7 +4342,7 @@ Before starting the auto-tuning process, make sure that:
Click Ok to start the auto-tuning process.
- WARNING!
+ WARNING!
The auto-tuning procedure should be executed with caution and requires the vehicle to fly stable enough before attempting the procedure!
@@ -4360,7 +4360,7 @@ Click Ok to start the auto-tuning process.
Not Mapped
- Not Mapped
+ Not Mapped
@@ -4368,48 +4368,48 @@ Click Ok to start the auto-tuning process.
100%
- 100%
+ 100%Battery Status
- Battery Status
+ Battery StatusBattery %1
- Battery %1
+ Battery %1Charge State
- Charge State
+ Charge StateRemaining
- Remaining
+ RemainingVoltage
- Voltage
+ VoltageConsumed
- Consumed
+ ConsumedTemperature
- Temperature
+ TemperatureFunction
- Function
+ Function
@@ -4417,7 +4417,7 @@ Click Ok to start the auto-tuning process.
Blank
- Blank
+ Blank
@@ -4425,12 +4425,12 @@ Click Ok to start the auto-tuning process.
Bluetooth Link Settings
- Bluetooth Link Settings
+ Bluetooth Link SettingsBluetooth Not Available
- Bluetooth Not Available
+ Bluetooth Not Available
@@ -4438,7 +4438,7 @@ Click Ok to start the auto-tuning process.
Bluetooth Link Error
- Bluetooth Link Error
+ Bluetooth Link Error
@@ -4446,27 +4446,27 @@ Click Ok to start the auto-tuning process.
Device
- Device
+ DeviceAddress
- Address
+ AddressBluetooth Devices
- Bluetooth Devices
+ Bluetooth DevicesScan
- Scan
+ ScanStop
- Stop
+ Stop
@@ -4474,158 +4474,158 @@ Click Ok to start the auto-tuning process.
Write failed: %1
- Write failed: %1
+ Write failed: %1Incorrect number of bytes returned for write: actual(%1) expected(%2)
- Incorrect number of bytes returned for write: actual(%1) expected(%2)
+ Incorrect number of bytes returned for write: actual(%1) expected(%2)Timeout waiting for bytes to be available
- Timeout waiting for bytes to be available
+ Timeout waiting for bytes to be availableRead failed: error: %1
- Read failed: error: %1
+ Read failed: error: %1Get Command Response:
- Get Command Response:
+ Get Command Response: Invalid sync response: 0x%1 0x%2
- Invalid sync response: 0x%1 0x%2
+ Invalid sync response: 0x%1 0x%2This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service.
- This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service.
+ This board is using a microcontroller with faulty silicon and an incorrect configuration and should be put out of service.Unknown response code
- Unknown response code
+ Unknown response codeCommand failed: 0x%1 (%2)
- Command failed: 0x%1 (%2)
+ Command failed: 0x%1 (%2)Get Board Info:
- Get Board Info:
+ Get Board Info: Send Command:
- Send Command:
+ Send Command: Unable to open firmware file %1: %2
- Unable to open firmware file %1: %2
+ Unable to open firmware file %1: %2Firmware file read failed: %1
- Firmware file read failed: %1
+ Firmware file read failed: %1Flash failed: %1 at address 0x%2
- Flash failed: %1 at address 0x%2
+ Flash failed: %1 at address 0x%2Unable to retrieve block from ihx: index %1
- Unable to retrieve block from ihx: index %1
+ Unable to retrieve block from ihx: index %1Unable to set flash start address: 0x%2
- Unable to set flash start address: 0x%2
+ Unable to set flash start address: 0x%2Read failed: %1 at address: 0x%2
- Read failed: %1 at address: 0x%2
+ Read failed: %1 at address: 0x%2Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3
- Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3
+ Compare failed: expected(0x%1) actual(0x%2) at address: 0x%3Unable to set read start address: 0x%2
- Unable to set read start address: 0x%2
+ Unable to set read start address: 0x%2CRC mismatch: board(0x%1) file(0x%2)
- CRC mismatch: board(0x%1) file(0x%2)
+ CRC mismatch: board(0x%1) file(0x%2)Open failed on port %1: %2
- Open failed on port %1: %2
+ Open failed on port %1: %2Unable to put radio into command mode +++
- Unable to put radio into command mode +++
+ Unable to put radio into command mode +++Radio did not respond to command mode
- Radio did not respond to command mode
+ Radio did not respond to command modeRadio did not respond to ATI2 command
- Radio did not respond to ATI2 command
+ Radio did not respond to ATI2 commandRadio did not return board id
- Radio did not return board id
+ Radio did not return board idFound unsupported bootloader version: %1
- Found unsupported bootloader version: %1
+ Found unsupported bootloader version: %1Unable to reboot radio (ready read)
- Unable to reboot radio (ready read)
+ Unable to reboot radio (ready read)Erase failed: %1
- Erase failed: %1
+ Erase failed: %1Get Device:
- Get Device:
+ Get Device: Get Board Id:
- Get Board Id:
+ Get Board Id:
@@ -4633,17 +4633,17 @@ Click Ok to start the auto-tuning process.
CameraCalc section version %1 not supported
- CameraCalc section version %1 not supported
+ CameraCalc section version %1 not supportedCustom Camera
- Custom Camera
+ Custom CameraManual (no camera specs)
- Manual (no camera specs)
+ Manual (no camera specs)
@@ -4651,27 +4651,27 @@ Click Ok to start the auto-tuning process.
Width
- Width
+ WidthHeight
- Height
+ HeightSensor
- Sensor
+ SensorImage
- Image
+ ImageFocal length
- Focal length
+ Focal length
@@ -4679,27 +4679,27 @@ Click Ok to start the auto-tuning process.
Front Lap
- Front Lap
+ Front LapSide Lap
- Side Lap
+ Side LapOverlap
- Overlap
+ OverlapSelect one:
- Select one:
+ Select one:Grnd Res
- Grnd Res
+ Grnd Res
@@ -4708,77 +4708,77 @@ Click Ok to start the auto-tuning process.
Vehicle must be restarted for changes to take effect.
- Vehicle must be restarted for changes to take effect.
+ Vehicle must be restarted for changes to take effect.Apply and Restart
- Apply and Restart
+ Apply and RestartCamera Trigger Settings
- Camera Trigger Settings
+ Camera Trigger SettingsTrigger mode
- Trigger mode
+ Trigger modeTrigger interface
- Trigger interface
+ Trigger interfaceTime Interval
- Time Interval
+ Time IntervalDistance Interval
- Distance Interval
+ Distance IntervalHardware Settings
- Hardware Settings
+ Hardware SettingsAUX Pin Assignment
- AUX Pin Assignment
+ AUX Pin AssignmentTrigger Pin Polarity
- Trigger Pin Polarity
+ Trigger Pin PolarityTrigger Period
- Trigger Period
+ Trigger PeriodCamera
- Camera
+ CameraCamera setup is used to adjust camera and gimbal settings.
- Camera setup is used to adjust camera and gimbal settings.
+ Camera setup is used to adjust camera and gimbal settings.
@@ -4787,37 +4787,37 @@ Click Ok to start the auto-tuning process.
Trigger interface
- Trigger interface
+ Trigger interfaceTrigger mode
- Trigger mode
+ Trigger modeTime interval
- Time interval
+ Time intervalDistance interval
- Distance interval
+ Distance intervalAUX pins
- AUX pins
+ AUX pinsAUX pin polarity
- AUX pin polarity
+ AUX pin polarity
@@ -4825,37 +4825,37 @@ Click Ok to start the auto-tuning process.
Camera
- Camera
+ CameraTime
- Time
+ TimeDistance
- Distance
+ DistanceMode
- Mode
+ ModePitch
- Pitch
+ PitchYaw
- Yaw
+ YawGimbal
- Gimbal
+ Gimbal
@@ -4863,42 +4863,42 @@ Click Ok to start the auto-tuning process.
Center map on:
- Center map on:
+ Center map on:Mission
- Mission
+ MissionAll items
- All items
+ All itemsLaunch
- Launch
+ LaunchCurrent Location
- Current Location
+ Current LocationSpecified Location
- Specified Location
+ Specified LocationVehicle
- Vehicle
+ VehicleFollow Vehicle
- Follow Vehicle
+ Follow Vehicle
@@ -4906,37 +4906,37 @@ Click Ok to start the auto-tuning process.
Center map on:
- Center map on:
+ Center map on:Mission
- Mission
+ MissionAll items
- All items
+ All itemsLaunch
- Launch
+ LaunchVehicle
- Vehicle
+ VehicleCurrent Location
- Current Location
+ Current LocationSpecified Location
- Specified Location
+ Specified Location
@@ -4944,12 +4944,12 @@ Click Ok to start the auto-tuning process.
Component %1
- Component %1
+ Component %1Internal Error: Parameter MetaData major must be 1
- Internal Error: Parameter MetaData major must be 1
+ Internal Error: Parameter MetaData major must be 1
@@ -4958,12 +4958,12 @@ Click Ok to start the auto-tuning process.
This Pattern does not support Presets.
- This Pattern does not support Presets.
+ This Pattern does not support Presets.'%1' is a built-in preset which cannot be deleted.
- '%1' is a built-in preset which cannot be deleted.
+ '%1' is a built-in preset which cannot be deleted.
@@ -4971,7 +4971,7 @@ Click Ok to start the auto-tuning process.
Rule
- Rule
+ Rule
@@ -4979,24 +4979,24 @@ Click Ok to start the auto-tuning process.
%1 does not support loading this complex mission item type: %2:%3
- %1 does not support loading this complex mission item type: %2:%3
+ %1 does not support loading this complex mission item type: %2:%3%1 complex item version %2 not supported
- %1 complex item version %2 not supported
+ %1 complex item version %2 not supportedCorridor Scan
- Corridor Scan
+ Corridor ScanC
- C
+ C
@@ -5004,27 +5004,27 @@ Click Ok to start the auto-tuning process.
Corridor
- Corridor
+ CorridorWidth
- Width
+ WidthTurnaround dist
- Turnaround dist
+ Turnaround distUse the Polyline Tools to create the polyline which defines the corridor.
- Use the Polyline Tools to create the polyline which defines the corridor.
+ Use the Polyline Tools to create the polyline which defines the corridor.Images in turnarounds
- Images in turnarounds
+ Images in turnarounds
@@ -5032,152 +5032,152 @@ Click Ok to start the auto-tuning process.
Qt Platform:
- Qt Platform:
+ Qt Platform:Font Point Size 10
- Font Point Size 10
+ Font Point Size 10Default font width:
- Default font width:
+ Default font width:Font Point Size 10.5
- Font Point Size 10.5
+ Font Point Size 10.5Default font height:
- Default font height:
+ Default font height:Font Point Size 11
- Font Point Size 11
+ Font Point Size 11Default font pixel size:
- Default font pixel size:
+ Default font pixel size:Font Point Size 11.5
- Font Point Size 11.5
+ Font Point Size 11.5Default font point size:
- Default font point size:
+ Default font point size:Font Point Size 12
- Font Point Size 12
+ Font Point Size 12QML Screen Desktop:
- QML Screen Desktop:
+ QML Screen Desktop:Font Point Size 12.5
- Font Point Size 12.5
+ Font Point Size 12.5QML Screen Size:
- QML Screen Size:
+ QML Screen Size:Font Point Size 13
- Font Point Size 13
+ Font Point Size 13QML Pixel Density:
- QML Pixel Density:
+ QML Pixel Density:Font Point Size 13.5
- Font Point Size 13.5
+ Font Point Size 13.5QML Pixel Ratio:
- QML Pixel Ratio:
+ QML Pixel Ratio:Font Point Size 14
- Font Point Size 14
+ Font Point Size 14Default Point:
- Default Point:
+ Default Point:Font Point Size 14.5
- Font Point Size 14.5
+ Font Point Size 14.5Computed Font Height:
- Computed Font Height:
+ Computed Font Height:Font Point Size 15
- Font Point Size 15
+ Font Point Size 15Computed Screen Height:
- Computed Screen Height:
+ Computed Screen Height:Font Point Size 15.5
- Font Point Size 15.5
+ Font Point Size 15.5Computed Screen Width:
- Computed Screen Width:
+ Computed Screen Width:Font Point Size 16
- Font Point Size 16
+ Font Point Size 16Desktop Available Width:
- Desktop Available Width:
+ Desktop Available Width:Font Point Size 16.5
- Font Point Size 16.5
+ Font Point Size 16.5Desktop Available Height:
- Desktop Available Height:
+ Desktop Available Height:Font Point Size 17
- Font Point Size 17
+ Font Point Size 17
@@ -5185,87 +5185,87 @@ Click Ok to start the auto-tuning process.
Generic Initial checks
- Generic Initial checks
+ Generic Initial checksHardware
- Hardware
+ HardwareProps mounted? Wings secured? Tail secured?
- Props mounted? Wings secured? Tail secured?
+ Props mounted? Wings secured? Tail secured?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereActuators
- Actuators
+ ActuatorsMove all control surfaces. Did they work properly?
- Move all control surfaces. Did they work properly?
+ Move all control surfaces. Did they work properly?Motors
- Motors
+ MotorsPropellers free? Then throttle up gently. Working properly?
- Propellers free? Then throttle up gently. Working properly?
+ Propellers free? Then throttle up gently. Working properly?Mission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?Wind & weather
- Wind & weather
+ Wind & weatherOK for your platform? Lauching into the wind?
- OK for your platform? Lauching into the wind?
+ OK for your platform? Lauching into the wind?Flight area
- Flight area
+ Flight areaLaunch area and path free of obstacles/people?
- Launch area and path free of obstacles/people?
+ Launch area and path free of obstacles/people?
@@ -5273,133 +5273,133 @@ Click Ok to start the auto-tuning process.
controller WiFi Bridge
- controller WiFi Bridge
+ controller WiFi BridgeError fetching WiFi Bridge Status: %1
- Error fetching WiFi Bridge Status: %1
+ Error fetching WiFi Bridge Status: %1ESP WiFi Bridge Settings
- ESP WiFi Bridge Settings
+ ESP WiFi Bridge SettingsWiFi Mode
- WiFi Mode
+ WiFi ModeWiFi Channel
- WiFi Channel
+ WiFi ChannelWiFi AP SSID
- WiFi AP SSID
+ WiFi AP SSIDWiFi AP Password
- WiFi AP Password
+ WiFi AP PasswordWiFi STA SSID
- WiFi STA SSID
+ WiFi STA SSIDWiFi STA Password
- WiFi STA Password
+ WiFi STA PasswordUART Baud Rate
- UART Baud Rate
+ UART Baud RateQGC UDP Port
- QGC UDP Port
+ QGC UDP PortESP WiFi Bridge Status
- ESP WiFi Bridge Status
+ ESP WiFi Bridge StatusBridge/Vehicle Link
- Bridge/Vehicle Link
+ Bridge/Vehicle LinkBridge/QGC Link
- Bridge/QGC Link
+ Bridge/QGC LinkQGC/Bridge Link
- QGC/Bridge Link
+ QGC/Bridge LinkMessages Received
- Messages Received
+ Messages ReceivedMessages Lost
- Messages Lost
+ Messages LostMessages Sent
- Messages Sent
+ Messages SentRestore Defaults
- Restore Defaults
+ Restore DefaultsRestart WiFi Bridge
- Restart WiFi Bridge
+ Restart WiFi BridgeReboot WiFi Bridge
- Reboot WiFi Bridge
+ Reboot WiFi BridgeThis will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it?
- This will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it?
+ This will restart the WiFi Bridge so the settings you've changed can take effect. Note that you may have to change your computer WiFi settings and QGroundControl link settings to match these changes. Are you sure you want to restart it?Reset Counters
- Reset Counters
+ Reset CountersWiFi Bridge
- WiFi Bridge
+ WiFi BridgeThe ESP8266 WiFi Bridge Component is used to setup the WiFi link.
- The ESP8266 WiFi Bridge Component is used to setup the WiFi link.
+ The ESP8266 WiFi Bridge Component is used to setup the WiFi link.
@@ -5407,32 +5407,32 @@ Click Ok to start the auto-tuning process.
Firmware Version
- Firmware Version
+ Firmware VersionWiFi Mode
- WiFi Mode
+ WiFi ModeWiFi Channel
- WiFi Channel
+ WiFi ChannelWiFi AP SSID
- WiFi AP SSID
+ WiFi AP SSIDWiFi AP Password
- WiFi AP Password
+ WiFi AP PasswordUART Baud Rate
- UART Baud Rate
+ UART Baud Rate
@@ -5440,57 +5440,57 @@ Click Ok to start the auto-tuning process.
Latitude
- Latitude
+ LatitudeLongitude
- Longitude
+ LongitudeSet Geographic
- Set Geographic
+ Set GeographicZone
- Zone
+ ZoneHemisphere
- Hemisphere
+ HemisphereEasting
- Easting
+ EastingNorthing
- Northing
+ NorthingSet UTM
- Set UTM
+ Set UTMMGRS
- MGRS
+ MGRSSet MGRS
- Set MGRS
+ Set MGRSSet From Vehicle Position
- Set From Vehicle Position
+ Set From Vehicle Position
@@ -5498,7 +5498,7 @@ Click Ok to start the auto-tuning process.
Close
- Close
+ Close
@@ -5506,12 +5506,12 @@ Click Ok to start the auto-tuning process.
Invalid Nak format
- Invalid Nak format
+ Invalid Nak formaterrno %1
- errno %1
+ errno %1
@@ -5526,13 +5526,13 @@ Click Ok to start the auto-tuning process.
Download failed
- Download failed
+ Download failedDownload failed: Error saving file
- Download failed: Error saving file
+ Download failed: Error saving file
@@ -5540,103 +5540,103 @@ Click Ok to start the auto-tuning process.
Set to vehicle heading
- Set to vehicle heading
+ Set to vehicle headingSet to vehicle location
- Set to vehicle location
+ Set to vehicle locationAltitude
- Altitude
+ AltitudeRadius
- Radius
+ RadiusLoiter clockwise
- Loiter clockwise
+ Loiter clockwiseLanding point
- Landing point
+ Landing pointHeading
- Heading
+ HeadingGlide Slope
- Glide Slope
+ Glide SlopeAltitudes relative to launch
- Altitudes relative to launch
+ Altitudes relative to launchDrag the loiter point to adjust landing direction for wind and obstacles.
- Drag the loiter point to adjust landing direction for wind and obstacles.
+ Drag the loiter point to adjust landing direction for wind and obstacles.Done
- Done
+ DoneCamera
- Camera
+ CameraFinal approach
- Final approach
+ Final approachUse loiter to altitude
- Use loiter to altitude
+ Use loiter to altitudeDistance
- Distance
+ Distance* Approximate glide slope altitudes.
- * Approximate glide slope altitudes.
+ * Approximate glide slope altitudes.* Actual flight path will vary.
- * Actual flight path will vary.
+ * Actual flight path will vary.* Avoid tailwind on landing.
- * Avoid tailwind on landing.
+ * Avoid tailwind on landing.Click in map to set landing point.
- Click in map to set landing point.
+ Click in map to set landing point.- or -
- - or -
+ - or -
@@ -5644,22 +5644,22 @@ Click Ok to start the auto-tuning process.
Loiter
- Loiter
+ LoiterApproach
- Approach
+ ApproachLanding Area
- Landing Area
+ Landing AreaGlide Slope
- Glide Slope
+ Glide Slope
@@ -5667,27 +5667,27 @@ Click Ok to start the auto-tuning process.
Unknown: %1
- Unknown: %1
+ Unknown: %1true
- true
+ truefalse
- false
+ falseChange of parameter %1 requires a Vehicle reboot to take effect.
- Change of parameter %1 requires a Vehicle reboot to take effect.
+ Change of parameter %1 requires a Vehicle reboot to take effect.Change of '%1' value requires restart of %2 to take effect.
- Change of '%1' value requires restart of %2 to take effect.
+ Change of '%1' value requires restart of %2 to take effect.
@@ -5695,12 +5695,12 @@ Click Ok to start the auto-tuning process.
Other
- Other
+ OtherMisc
- Misc
+ Misc
@@ -5716,13 +5716,13 @@ Click Ok to start the auto-tuning process.
Value must be within %1 and %2
- Value must be within %1 and %2
+ Value must be within %1 and %2Invalid number
- Invalid number
+ Invalid number
@@ -5730,12 +5730,12 @@ Click Ok to start the auto-tuning process.
Invalid Value
- Invalid Value
+ Invalid ValueValue Details
- Value Details
+ Value Details
@@ -5743,32 +5743,32 @@ Click Ok to start the auto-tuning process.
Default
- Default
+ DefaultSmall
- Small
+ SmallMedium
- Medium
+ MediumLarge
- Large
+ LargeSettings version %1 for %2 is not supported. Setup will be reset to defaults.
- Settings version %1 for %2 is not supported. Setup will be reset to defaults.
+ Settings version %1 for %2 is not supported. Setup will be reset to defaults.Load Settings
- Load Settings
+ Load Settings
@@ -5776,7 +5776,7 @@ Click Ok to start the auto-tuning process.
Value Details
- Value Details
+ Value Details
@@ -5784,22 +5784,22 @@ Click Ok to start the auto-tuning process.
PX4 Pro
- PX4 Pro
+ PX4 ProArduPilot
- ArduPilot
+ ArduPilotGeneric
- Generic
+ GenericUnknown
- Unknown
+ Unknown
@@ -5807,102 +5807,102 @@ Click Ok to start the auto-tuning process.
Incorrectly formatted line in .ihx file, line too short
- Incorrectly formatted line in .ihx file, line too short
+ Incorrectly formatted line in .ihx file, line too shortUnsupported record type in file: %1
- Unsupported record type in file: %1
+ Unsupported record type in file: %1Unable to open firmware file %1, error: %2
- Unable to open firmware file %1, error: %2
+ Unable to open firmware file %1, error: %2Supplied file is not a valid JSON document
- Supplied file is not a valid JSON document
+ Supplied file is not a valid JSON documentFirmware file missing required key: %1
- Firmware file missing required key: %1
+ Firmware file missing required key: %1Firmware file has invalid key: %1
- Firmware file has invalid key: %1
+ Firmware file has invalid key: %1Downloaded firmware board id does not match hardware board id: %1 != %2
- Downloaded firmware board id does not match hardware board id: %1 != %2
+ Downloaded firmware board id does not match hardware board id: %1 != %2Write failed for parameter meta data file, error: %1
- Write failed for parameter meta data file, error: %1
+ Write failed for parameter meta data file, error: %1Unable to open parameter meta data file %1 for writing, error: %2
- Unable to open parameter meta data file %1 for writing, error: %2
+ Unable to open parameter meta data file %1 for writing, error: %2Write failed for airframe meta data file, error: %1
- Write failed for airframe meta data file, error: %1
+ Write failed for airframe meta data file, error: %1Unable to open airframe meta data file %1 for writing, error: %2
- Unable to open airframe meta data file %1 for writing, error: %2
+ Unable to open airframe meta data file %1 for writing, error: %2Unable to open decompressed file %1 for writing, error: %2
- Unable to open decompressed file %1 for writing, error: %2
+ Unable to open decompressed file %1 for writing, error: %2Write failed for decompressed image file, error: %1
- Write failed for decompressed image file, error: %1
+ Write failed for decompressed image file, error: %1Firmware file has invalid decompressed size for %1
- Firmware file has invalid decompressed size for %1
+ Firmware file has invalid decompressed size for %1Could not find compressed bytes for %1 in Firmware file
- Could not find compressed bytes for %1 in Firmware file
+ Could not find compressed bytes for %1 in Firmware fileIncorrectly formed compressed bytes section for %1 in Firmware file
- Incorrectly formed compressed bytes section for %1 in Firmware file
+ Incorrectly formed compressed bytes section for %1 in Firmware fileFirmware file has 0 length %1
- Firmware file has 0 length %1
+ Firmware file has 0 length %1Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2)
- Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2)
+ Size for decompressed %1 does not match stored size: Expected(%1) Actual(%2)Successfully decompressed %1
- Successfully decompressed %1
+ Successfully decompressed %1Unabled to open firmware file %1, %2
- Unabled to open firmware file %1, %2
+ Unabled to open firmware file %1, %2
@@ -5913,142 +5913,142 @@ Click Ok to start the auto-tuning process.
Canon
- Canon
+ CanonS100 PowerShot
- S100 PowerShot
+ S100 PowerShotCanon S100 PowerShot
- Canon S100 PowerShot
+ Canon S100 PowerShotEOS-M 22mm
- EOS-M 22mm
+ EOS-M 22mmCanon EOS-M 22mm
- Canon EOS-M 22mm
+ Canon EOS-M 22mmG9 X PowerShot
- G9 X PowerShot
+ G9 X PowerShotCanon G9 X PowerShot
- Canon G9 X PowerShot
+ Canon G9 X PowerShotSX260 HS PowerShot
- SX260 HS PowerShot
+ SX260 HS PowerShotCanon SX260 HS PowerShot
- Canon SX260 HS PowerShot
+ Canon SX260 HS PowerShotGoPro
- GoPro
+ GoProHero 4
- Hero 4
+ Hero 4GoPro Hero 4
- GoPro Hero 4
+ GoPro Hero 4Parrot
- Parrot
+ ParrotSequioa RGB
- Sequioa RGB
+ Sequioa RGBParrot Sequioa RGB
- Parrot Sequioa RGB
+ Parrot Sequioa RGBSequioa Monochrome
- Sequioa Monochrome
+ Sequioa MonochromeParrot Sequioa Monochrome
- Parrot Sequioa Monochrome
+ Parrot Sequioa MonochromeRedEdge
- RedEdge
+ RedEdgeRicoh
- Ricoh
+ RicohGR II
- GR II
+ GR IIRicoh GR II
- Ricoh GR II
+ Ricoh GR IISentera
- Sentera
+ SenteraDouble 4K Sensor
- Double 4K Sensor
+ Double 4K SensorSentera Double 4K Sensor
- Sentera Double 4K Sensor
+ Sentera Double 4K SensorNDVI Single Sensor
- NDVI Single Sensor
+ NDVI Single SensorSentera NDVI Single Sensor
- Sentera NDVI Single Sensor
+ Sentera NDVI Single Sensor6X Sensor
- 6X Sensor
+ 6X Sensor
@@ -6066,127 +6066,127 @@ Click Ok to start the auto-tuning process.
Sony
- Sony
+ Sonya6000 16mm
- a6000 16mm
+ a6000 16mmSony a6000 16mm
- Sony a6000 16mm
+ Sony a6000 16mma6000 35mm
- a6000 35mm
+ a6000 35mma6300 Zeiss 21mm f/2.8
- a6300 Zeiss 21mm f/2.8
+ a6300 Zeiss 21mm f/2.8Sony a6300 Zeiss 21mm f/2.8
- Sony a6300 Zeiss 21mm f/2.8
+ Sony a6300 Zeiss 21mm f/2.8a6300 Sony 28mm f/2.0
- a6300 Sony 28mm f/2.0
+ a6300 Sony 28mm f/2.0Sony a6300 Sony 28mm f/2.0
- Sony a6300 Sony 28mm f/2.0
+ Sony a6300 Sony 28mm f/2.0a7R II Zeiss 21mm f/2.8
- a7R II Zeiss 21mm f/2.8
+ a7R II Zeiss 21mm f/2.8Sony a7R II Zeiss 21mm f/2.8
- Sony a7R II Zeiss 21mm f/2.8
+ Sony a7R II Zeiss 21mm f/2.8a7R II Sony 28mm f/2.0
- a7R II Sony 28mm f/2.0
+ a7R II Sony 28mm f/2.0Sony a7R II Sony 28mm f/2.0
- Sony a7R II Sony 28mm f/2.0
+ Sony a7R II Sony 28mm f/2.0a7r III 35mm
- a7r III 35mm
+ a7r III 35mma7r IV 35mm
- a7r IV 35mm
+ a7r IV 35mmDSC-QX30U @ 4.3mm f/3.5
- DSC-QX30U @ 4.3mm f/3.5
+ DSC-QX30U @ 4.3mm f/3.5Sony DSC-QX30U @ 4.3mm f/3.5
- Sony DSC-QX30U @ 4.3mm f/3.5
+ Sony DSC-QX30U @ 4.3mm f/3.5DSC-RX0
- DSC-RX0
+ DSC-RX0Sony DSC-RX0
- Sony DSC-RX0
+ Sony DSC-RX0DSC-RX1R II 35mm
- DSC-RX1R II 35mm
+ DSC-RX1R II 35mmILCE-QX1
- ILCE-QX1
+ ILCE-QX1Sony ILCE-QX1
- Sony ILCE-QX1
+ Sony ILCE-QX1NEX-5R 20mm
- NEX-5R 20mm
+ NEX-5R 20mmSony NEX-5R 20mm
- Sony NEX-5R 20mm
+ Sony NEX-5R 20mmRX100 II 28mm
- RX100 II 28mm
+ RX100 II 28mmSony RX100 II 28mm
- Sony RX100 II 28mm
+ Sony RX100 II 28mm
@@ -6194,85 +6194,85 @@ Click Ok to start the auto-tuning process.
Yuneec
- Yuneec
+ YuneecCGOET
- CGOET
+ CGOETYuneec CGOET
- Yuneec CGOET
+ Yuneec CGOETE10T
- E10T
+ E10TYuneec E10T
- Yuneec E10T
+ Yuneec E10TE50
- E50
+ E50Yuneec E50
- Yuneec E50
+ Yuneec E50E90
- E90
+ E90Yuneec E90
- Yuneec E90
+ Yuneec E90Flir
- Flir
+ FlirDuo R
- Duo R
+ Duo RFlir Duo R
- Flir Duo R
+ Flir Duo RDuo Pro R
- Duo Pro R
+ Duo Pro RWorkswell
- Workswell
+ WorkswellWiris Security
- Wiris Security
+ Wiris SecurityVehicle is not running latest stable firmware! Running %1, latest stable is %2.
- Vehicle is not running latest stable firmware! Running %1, latest stable is %2.
+ Vehicle is not running latest stable firmware! Running %1, latest stable is %2.
@@ -6280,212 +6280,212 @@ Click Ok to start the auto-tuning process.
Firmware
- Firmware
+ FirmwareFirmware Setup
- Firmware Setup
+ Firmware Setup%1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras.
- %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras.
+ %1 can upgrade the firmware on Pixhawk devices, SiK Radios and PX4 Flow Smart Cameras.Update the autopilot firmware to the latest version
- Update the autopilot firmware to the latest version
+ Update the autopilot firmware to the latest versionAll %1 connections to vehicles must be
- All %1 connections to vehicles must be
+ All %1 connections to vehicles must be Upgrade cancelled
- Upgrade cancelled
+ Upgrade cancelledSelect Firmware File
- Select Firmware File
+ Select Firmware FileFirmware Files (*.px4 *.apj *.bin *.ihx)
- Firmware Files (*.px4 *.apj *.bin *.ihx)
+ Firmware Files (*.px4 *.apj *.bin *.ihx)All Files (*)
- All Files (*)
+ All Files (*)Multiple devices detected! Remove all detected devices to perform the firmware upgrade.
- Multiple devices detected! Remove all detected devices to perform the firmware upgrade.
+ Multiple devices detected! Remove all detected devices to perform the firmware upgrade.Detected [%1]:
- Detected [%1]:
+ Detected [%1]: Found device
- Found device
+ Found devicePX4 Pro
- PX4 Pro
+ PX4 Pro Standard Version (stable)
- Standard Version (stable)
+ Standard Version (stable)Beta Testing (beta)
- Beta Testing (beta)
+ Beta Testing (beta)Developer Build (master)
- Developer Build (master)
+ Developer Build (master)Custom firmware file...
- Custom firmware file...
+ Custom firmware file...PX4 Pro
- PX4 Pro
+ PX4 ProArduPilot
- ArduPilot
+ ArduPilotStandard Version
- Standard Version
+ Standard VersionDetected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle:
- Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle:
+ Detected PX4 Flow board. The firmware you use on the PX4 Flow must match the AutoPilot firmware type you are using on the vehicle:Detected Pixhawk board. You can select from the following flight stacks:
- Detected Pixhawk board. You can select from the following flight stacks:
+ Detected Pixhawk board. You can select from the following flight stacks:Press Ok to upgrade your vehicle.
- Press Ok to upgrade your vehicle.
+ Press Ok to upgrade your vehicle.Flight Stack
- Flight Stack
+ Flight StackDownloading list of available firmwares...
- Downloading list of available firmwares...
+ Downloading list of available firmwares...No Firmware Available
- No Firmware Available
+ No Firmware AvailableAdvanced settings
- Advanced settings
+ Advanced settingsSelect the standard version or one from the file system (previously downloaded):
- Select the standard version or one from the file system (previously downloaded):
+ Select the standard version or one from the file system (previously downloaded):Select which version of the firmware you would like to install:
- Select which version of the firmware you would like to install:
+ Select which version of the firmware you would like to install:Select which version of the above flight stack you would like to install:
- Select which version of the above flight stack you would like to install:
+ Select which version of the above flight stack you would like to install:WARNING: BETA FIRMWARE.
- WARNING: BETA FIRMWARE.
+ WARNING: BETA FIRMWARE. This firmware version is ONLY intended for beta testers.
- This firmware version is ONLY intended for beta testers.
+ This firmware version is ONLY intended for beta testers. Although it has received FLIGHT TESTING, it represents actively changed code.
- Although it has received FLIGHT TESTING, it represents actively changed code.
+ Although it has received FLIGHT TESTING, it represents actively changed code. Do NOT use for normal operation.
- Do NOT use for normal operation.
+ Do NOT use for normal operation.WARNING: CONTINUOUS BUILD FIRMWARE.
- WARNING: CONTINUOUS BUILD FIRMWARE.
+ WARNING: CONTINUOUS BUILD FIRMWARE. This firmware has NOT BEEN FLIGHT TESTED.
- This firmware has NOT BEEN FLIGHT TESTED.
+ This firmware has NOT BEEN FLIGHT TESTED. It is only intended for DEVELOPERS.
- It is only intended for DEVELOPERS.
+ It is only intended for DEVELOPERS. Run bench tests without props first.
- Run bench tests without props first.
+ Run bench tests without props first. Do NOT fly this without additional safety precautions.
- Do NOT fly this without additional safety precautions.
+ Do NOT fly this without additional safety precautions. Follow the forums actively when using it.
- Follow the forums actively when using it.
+ Follow the forums actively when using it.Flash ChibiOS Bootloader
- Flash ChibiOS Bootloader
+ Flash ChibiOS Bootloader
@@ -6493,87 +6493,87 @@ Click Ok to start the auto-tuning process.
Connect not allowed during Firmware Upgrade.
- Connect not allowed during Firmware Upgrade.
+ Connect not allowed during Firmware Upgrade.Connected to bootloader:
- Connected to bootloader:
+ Connected to bootloader: Version: %1
- Version: %1
+ Version: %1 Board ID: %1
- Board ID: %1
+ Board ID: %1 Flash size: %1
- Flash size: %1
+ Flash size: %1Custom firmware selected but no filename given.
- Custom firmware selected but no filename given.
+ Custom firmware selected but no filename given.Unable to find specified firmware for board type
- Unable to find specified firmware for board type
+ Unable to find specified firmware for board typeNo firmware file selected
- No firmware file selected
+ No firmware file selectedDownloading firmware...
- Downloading firmware...
+ Downloading firmware... From: %1
- From: %1
+ From: %1Download complete
- Download complete
+ Download completeImage load failed
- Image load failed
+ Image load failedBootloader not found
- Bootloader not found
+ Bootloader not foundImage size of %1 is too large for board flash size %2
- Image size of %1 is too large for board flash size %2
+ Image size of %1 is too large for board flash size %2Upgrade complete
- Upgrade complete
+ Upgrade completeUpgrade cancelled
- Upgrade cancelled
+ Upgrade cancelledChoose board type
- Choose board type
+ Choose board type
@@ -6581,87 +6581,87 @@ Click Ok to start the auto-tuning process.
Fixed Wing Initial Checks
- Fixed Wing Initial Checks
+ Fixed Wing Initial ChecksHardware
- Hardware
+ HardwareProps mounted? Wings secured? Tail secured?
- Props mounted? Wings secured? Tail secured?
+ Props mounted? Wings secured? Tail secured?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereActuators
- Actuators
+ ActuatorsMove all control surfaces. Did they work properly?
- Move all control surfaces. Did they work properly?
+ Move all control surfaces. Did they work properly?Motors
- Motors
+ MotorsPropellers free? Then throttle up gently. Working properly?
- Propellers free? Then throttle up gently. Working properly?
+ Propellers free? Then throttle up gently. Working properly?Mission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?Wind & weather
- Wind & weather
+ Wind & weatherOK for your platform? Lauching into the wind?
- OK for your platform? Lauching into the wind?
+ OK for your platform? Lauching into the wind?Flight area
- Flight area
+ Flight areaLaunch area and path free of obstacles/people?
- Launch area and path free of obstacles/people?
+ Launch area and path free of obstacles/people?
@@ -6669,12 +6669,12 @@ Click Ok to start the auto-tuning process.
Fixed Wing Landing
- Fixed Wing Landing
+ Fixed Wing Landing%1 complex item version %2 not supported
- %1 complex item version %2 not supported
+ %1 complex item version %2 not supported
@@ -6682,81 +6682,81 @@ Click Ok to start the auto-tuning process.
Flight Brief
- Flight Brief
+ Flight BriefAuthorizations
- Authorizations
+ AuthorizationsAuthorization Pending
- Authorization Pending
+ Authorization PendingAuthorization Accepted
- Authorization Accepted
+ Authorization AcceptedAuthorization Rejected
- Authorization Rejected
+ Authorization RejectedAuthorization Unknown
- Authorization Unknown
+ Authorization UnknownAuthorization Not Required
- Authorization Not Required
+ Authorization Not RequiredRules & Compliance
- Rules & Compliance
+ Rules & ComplianceRules you may be violating
- Rules you may be violating
+ Rules you may be violatingRules needing more information
- Rules needing more information
+ Rules needing more informationRules you should review
- Rules you should review
+ Rules you should reviewRules you are following
- Rules you are following
+ Rules you are followingUpdate Plan
- Update Plan
+ Update PlanSubmit Plan
- Submit Plan
+ Submit PlanClose
- Close
+ Close
@@ -6764,38 +6764,38 @@ Click Ok to start the auto-tuning process.
Flight Details
- Flight Details
+ Flight DetailsFlight Date & Time
- Flight Date & Time
+ Flight Date & TimeNow
- Now
+ NowToday
- Today
+ TodayFlight Start Time
- Flight Start Time
+ Flight Start TimeDuration
- Duration
+ DurationFlight Context
- Flight Context
+ Flight Context
@@ -6803,12 +6803,12 @@ Click Ok to start the auto-tuning process.
WAITING FOR VIDEO
- WAITING FOR VIDEO
+ WAITING FOR VIDEOVIDEO DISABLED
- VIDEO DISABLED
+ VIDEO DISABLED
@@ -6816,7 +6816,7 @@ Click Ok to start the auto-tuning process.
Specify Position
- Specify Position
+ Specify Position
@@ -6825,7 +6825,7 @@ Click Ok to start the auto-tuning process.
N/ANo data to display
- N/A
+ N/A
@@ -6834,7 +6834,7 @@ Click Ok to start the auto-tuning process.
N/ANo data to display
- N/A
+ N/A
@@ -6842,12 +6842,12 @@ Click Ok to start the auto-tuning process.
Flight Modes
- Flight Modes
+ Flight ModesFlight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
- Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
+ Flight Modes Setup is used to configure the transmitter switches associated with Flight Modes.
@@ -6858,7 +6858,7 @@ Click Ok to start the auto-tuning process.
Mode switch
- Mode switch
+ Mode switch
@@ -6866,19 +6866,19 @@ Click Ok to start the auto-tuning process.
Setup required
- Setup required
+ Setup requiredFlight Mode %1
- Flight Mode %1
+ Flight Mode %1 Position Ctl switch
- Position Ctl switch
+ Position Ctl switch
@@ -6888,19 +6888,19 @@ Click Ok to start the auto-tuning process.
Disabled
- Disabled
+ DisabledLoiter switch
- Loiter switch
+ Loiter switchReturn switch
- Return switch
+ Return switch
@@ -6908,17 +6908,17 @@ Click Ok to start the auto-tuning process.
Approval Pending
- Approval Pending
+ Approval PendingFlight Approved
- Flight Approved
+ Flight ApprovedFlight Rejected
- Flight Rejected
+ Flight Rejected
@@ -6927,40 +6927,40 @@ Click Ok to start the auto-tuning process.
Rrally point map item label
- R
+ RGo hereGo to location waypoint
- Go here
+ Go hereROI hereMake this a Region Of Interest
- ROI here
+ ROI hereOrbitOrbit waypoint
- Orbit
+ OrbitGo to location
- Go to location
+ Go to locationOrbit at location
- Orbit at location
+ Orbit at locationROI at location
- ROI at location
+ ROI at location
@@ -6968,37 +6968,37 @@ Click Ok to start the auto-tuning process.
Flight Plan complete
- Flight Plan complete
+ Flight Plan complete%1 Images Taken
- %1 Images Taken
+ %1 Images TakenRemove plan from vehicle
- Remove plan from vehicle
+ Remove plan from vehicleLeave plan on vehicle
- Leave plan on vehicle
+ Leave plan on vehicleResume Mission From Waypoint %1
- Resume Mission From Waypoint %1
+ Resume Mission From Waypoint %1Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight.
- Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight.
+ Resume Mission will rebuild the current mission from the last flown waypoint and upload it to the vehicle for the next flight.If you are changing batteries for Resume Mission do not disconnect from the vehicle.
- If you are changing batteries for Resume Mission do not disconnect from the vehicle.
+ If you are changing batteries for Resume Mission do not disconnect from the vehicle.
@@ -7006,7 +7006,7 @@ Click Ok to start the auto-tuning process.
Pre-Flight Checklist
- Pre-Flight Checklist
+ Pre-Flight Checklist
@@ -7014,7 +7014,7 @@ Click Ok to start the auto-tuning process.
Fly
- Fly
+ Fly
@@ -7022,7 +7022,7 @@ Click Ok to start the auto-tuning process.
Plan
- Plan
+ Plan
@@ -7030,7 +7030,7 @@ Click Ok to start the auto-tuning process.
Double-click to exit full screen
- Double-click to exit full screen
+ Double-click to exit full screen
@@ -7038,12 +7038,12 @@ Click Ok to start the auto-tuning process.
Single
- Single
+ SingleMulti-Vehicle
- Multi-Vehicle
+ Multi-Vehicle
@@ -7051,34 +7051,34 @@ Click Ok to start the auto-tuning process.
GPS Status
- GPS Status
+ GPS StatusGPS Data Unavailable
- GPS Data Unavailable
+ GPS Data UnavailableGPS Count:
- GPS Count:
+ GPS Count:N/ANo data to display
- N/A
+ N/AGPS Lock:
- GPS Lock:
+ GPS Lock:HDOP:
- HDOP:
+ HDOP:
@@ -7086,17 +7086,17 @@ Click Ok to start the auto-tuning process.
--.--No data to display
- --.--
+ --.--VDOP:
- VDOP:
+ VDOP:Course Over Ground:
- Course Over Ground:
+ Course Over Ground:
@@ -7104,32 +7104,32 @@ Click Ok to start the auto-tuning process.
Survey-in Active
- Survey-in Active
+ Survey-in ActiveRTK Streaming
- RTK Streaming
+ RTK StreamingDuration:
- Duration:
+ Duration:Accuracy:
- Accuracy:
+ Accuracy:Current Accuracy:
- Current Accuracy:
+ Current Accuracy:Satellites:
- Satellites:
+ Satellites:
@@ -7137,411 +7137,411 @@ Click Ok to start the auto-tuning process.
Units
- Units
+ UnitsArea
- Area
+ AreaSpeed
- Speed
+ SpeedTemperature
- Temperature
+ TemperatureMiscellaneous
- Miscellaneous
+ MiscellaneousLanguage
- Language
+ LanguageColor Scheme
- Color Scheme
+ Color SchemeMap Provider
- Map Provider
+ Map ProviderMap Type
- Map Type
+ Map TypeStream GCS Position
- Stream GCS Position
+ Stream GCS PositionMute all audio output
- Mute all audio output
+ Mute all audio outputClear all settings on next start
- Clear all settings on next start
+ Clear all settings on next startClear Settings
- Clear Settings
+ Clear SettingsAll saved settings will be reset the next time you start %1. Is this really what you want?
- All saved settings will be reset the next time you start %1. Is this really what you want?
+ All saved settings will be reset the next time you start %1. Is this really what you want?Application Load/Save Path
- Application Load/Save Path
+ Application Load/Save Path<not set>
- <not set>
+ <not set>Browse
- Browse
+ BrowseChoose the location to save/load files
- Choose the location to save/load files
+ Choose the location to save/load filesTelemetry Logs from Vehicle
- Telemetry Logs from Vehicle
+ Telemetry Logs from VehicleSave log after each flight
- Save log after each flight
+ Save log after each flightSave logs even if vehicle was not armed
- Save logs even if vehicle was not armed
+ Save logs even if vehicle was not armedFly View
- Fly View
+ Fly ViewAuto-Center Throttle
- Auto-Center Throttle
+ Auto-Center ThrottleShow simple camera controls (DIGICAM_CONTROL)
- Show simple camera controls (DIGICAM_CONTROL)
+ Show simple camera controls (DIGICAM_CONTROL)Guided Command Settings
- Guided Command Settings
+ Guided Command SettingsMinimum Altitude
- Minimum Altitude
+ Minimum AltitudeMaximum Altitude
- Maximum Altitude
+ Maximum AltitudeUI Scaling
- UI Scaling
+ UI ScalingUse Vehicle Pairing
- Use Vehicle Pairing
+ Use Vehicle PairingCheck for Internet connection
- Check for Internet connection
+ Check for Internet connectionSave CSV log of telemetry data
- Save CSV log of telemetry data
+ Save CSV log of telemetry dataUse Preflight Checklist
- Use Preflight Checklist
+ Use Preflight ChecklistEnforce Preflight Checklist
- Enforce Preflight Checklist
+ Enforce Preflight ChecklistKeep Map Centered On Vehicle
- Keep Map Centered On Vehicle
+ Keep Map Centered On VehicleShow Telemetry Log Replay Status Bar
- Show Telemetry Log Replay Status Bar
+ Show Telemetry Log Replay Status BarVirtual Joystick
- Virtual Joystick
+ Virtual JoystickUse Vertical Instrument Panel
- Use Vertical Instrument Panel
+ Use Vertical Instrument PanelShow additional heading indicators on Compass
- Show additional heading indicators on Compass
+ Show additional heading indicators on CompassLock Compass Nose-Up
- Lock Compass Nose-Up
+ Lock Compass Nose-UpGo To Location Max Distance
- Go To Location Max Distance
+ Go To Location Max DistanceVideo Settings
- Video Settings
+ Video SettingsSource
- Source
+ SourceFile Format
- File Format
+ File FormatVideo decode priority
- Video decode priority
+ Video decode priorityAuto-Delete Saved Recordings
- Auto-Delete Saved Recordings
+ Auto-Delete Saved RecordingsPlan View
- Plan View
+ Plan ViewDefault Mission Altitude
- Default Mission Altitude
+ Default Mission AltitudeVTOL TransitionDistance
- VTOL TransitionDistance
+ VTOL TransitionDistanceUse MAV_CMD_CONDITION_GATE for pattern generation
- Use MAV_CMD_CONDITION_GATE for pattern generation
+ Use MAV_CMD_CONDITION_GATE for pattern generationMissions Do Not Require Takeoff Item
- Missions Do Not Require Takeoff Item
+ Missions Do Not Require Takeoff ItemHorizontal Distance
- Horizontal Distance
+ Horizontal DistanceVertical Distance
- Vertical Distance
+ Vertical DistanceAutoConnect to the following devices
- AutoConnect to the following devices
+ AutoConnect to the following devicesPixhawk
- Pixhawk
+ PixhawkSiK Radio
- SiK Radio
+ SiK RadioPX4 Flow
- PX4 Flow
+ PX4 FlowLibrePilot
- LibrePilot
+ LibrePilotUDP
- UDP
+ UDPRTK GPS
- RTK GPS
+ RTK GPSZero-Conf
- Zero-Conf
+ Zero-ConfNMEA GPS Device
- NMEA GPS Device
+ NMEA GPS DeviceNMEA GPS Baudrate
- NMEA GPS Baudrate
+ NMEA GPS BaudrateNMEA stream UDP port
- NMEA stream UDP port
+ NMEA stream UDP portPerform Survey-In
- Perform Survey-In
+ Perform Survey-InUse Specified Base Position
- Use Specified Base Position
+ Use Specified Base PositionSave Current Base Position
- Save Current Base Position
+ Save Current Base PositionADSB Server
- ADSB Server
+ ADSB ServerNote: These setting are not meant for use with an ADSB transponder which is situated on the vehicle.
- Note: These setting are not meant for use with an ADSB transponder which is situated on the vehicle.
+ Note: These setting are not meant for use with an ADSB transponder which is situated on the vehicle.UDP Port
- UDP Port
+ UDP PortRTSP URL
- RTSP URL
+ RTSP URLTCP URL
- TCP URL
+ TCP URLAspect Ratio
- Aspect Ratio
+ Aspect RatioDisable When Disarmed
- Disable When Disarmed
+ Disable When DisarmedLow Latency Mode
- Low Latency Mode
+ Low Latency ModeMax Storage Usage
- Max Storage Usage
+ Max Storage UsageBrand Image
- Brand Image
+ Brand ImageIndoor Image
- Indoor Image
+ Indoor ImageChoose custom brand image file
- Choose custom brand image file
+ Choose custom brand image fileOutdoor Image
- Outdoor Image
+ Outdoor ImageReset Default Brand Image
- Reset Default Brand Image
+ Reset Default Brand Image%1 Version
- %1 Version
+ %1 Version
@@ -7549,17 +7549,17 @@ Click Ok to start the auto-tuning process.
GeoFence supports version %1
- GeoFence supports version %1
+ GeoFence supports version %1GeoFence polygon not stored as object
- GeoFence polygon not stored as object
+ GeoFence polygon not stored as objectGeoFence circle not stored as object
- GeoFence circle not stored as object
+ GeoFence circle not stored as object
@@ -7567,97 +7567,97 @@ Click Ok to start the auto-tuning process.
GeoFence
- GeoFence
+ GeoFenceGeoFencing allows you to set a virtual fence around the area you want to fly in.
- GeoFencing allows you to set a virtual fence around the area you want to fly in.
+ GeoFencing allows you to set a virtual fence around the area you want to fly in.This vehicle does not support GeoFence.
- This vehicle does not support GeoFence.
+ This vehicle does not support GeoFence.Insert GeoFence
- Insert GeoFence
+ Insert GeoFencePolygon Fence
- Polygon Fence
+ Polygon FenceCircular Fence
- Circular Fence
+ Circular FencePolygon Fences
- Polygon Fences
+ Polygon FencesNone
- None
+ NoneInclusion
- Inclusion
+ InclusionEdit
- Edit
+ EditDelete
- Delete
+ DeleteDel
- Del
+ DelCircular Fences
- Circular Fences
+ Circular FencesRadius
- Radius
+ RadiusBreach Return Point
- Breach Return Point
+ Breach Return PointAdd Breach Return Point
- Add Breach Return Point
+ Add Breach Return PointRemove Breach Return Point
- Remove Breach Return Point
+ Remove Breach Return PointAltitude
- Altitude
+ Altitude
@@ -7665,22 +7665,22 @@ Click Ok to start the auto-tuning process.
GeoFence load: Vertex count change mid-polygon - actual:expected
- GeoFence load: Vertex count change mid-polygon - actual:expected
+ GeoFence load: Vertex count change mid-polygon - actual:expectedGeoFence load: Polygon type changed before last load complete - actual:expected
- GeoFence load: Polygon type changed before last load complete - actual:expected
+ GeoFence load: Polygon type changed before last load complete - actual:expectedGeoFence load: Incomplete polygon loaded
- GeoFence load: Incomplete polygon loaded
+ GeoFence load: Incomplete polygon loadedGeoFence load: Unsupported command %1
- GeoFence load: Unsupported command %1
+ GeoFence load: Unsupported command %1
@@ -7689,7 +7689,7 @@ Click Ok to start the auto-tuning process.
BBreach Return Point item indicator
- B
+ B
@@ -7697,27 +7697,27 @@ Click Ok to start the auto-tuning process.
Images have alreay been tagged. Existing images will be removed.
- Images have alreay been tagged. Existing images will be removed.
+ Images have alreay been tagged. Existing images will be removed.The save folder already contains images.
- The save folder already contains images.
+ The save folder already contains images.Cannot find the image directory.
- Cannot find the image directory.
+ Cannot find the image directory.Couldn't replace the previously tagged images
- Couldn't replace the previously tagged images
+ Couldn't replace the previously tagged imagesCannot find the save directory.
- Cannot find the save directory.
+ Cannot find the save directory.
@@ -7725,54 +7725,54 @@ Click Ok to start the auto-tuning process.
Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag.
- Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag.
+ Used to tag a set of images from a survey mission with gps coordinates. You must provide the binary log from the flight as well as the directory which contains the images to tag.Select log file
- Select log file
+ Select log fileULog file (*.ulg)
- ULog file (*.ulg)
+ ULog file (*.ulg)PX4 log file (*.px4log)
- PX4 log file (*.px4log)
+ PX4 log file (*.px4log)All Files (*)
- All Files (*)
+ All Files (*)Select image directory
- Select image directory
+ Select image directory(Optionally) Select save directory
- (Optionally) Select save directory
+ (Optionally) Select save directorySelect save directory
- Select save directory
+ Select save directoryCancel Tagging
- Cancel Tagging
+ Cancel TaggingStart Tagging
- Start Tagging
+ Start Tagging
@@ -7780,13 +7780,13 @@ Click Ok to start the auto-tuning process.
The image directory doesn't contain images, make sure your images are of the JPG format
- The image directory doesn't contain images, make sure your images are of the JPG format
+ The image directory doesn't contain images, make sure your images are of the JPG formatGeotagging failed. Couldn't open an image.
- Geotagging failed. Couldn't open an image.
+ Geotagging failed. Couldn't open an image.
@@ -7796,42 +7796,42 @@ Click Ok to start the auto-tuning process.
Tagging cancelled
- Tagging cancelled
+ Tagging cancelledGeotagging failed. Couldn't open log file.
- Geotagging failed. Couldn't open log file.
+ Geotagging failed. Couldn't open log file.%1 - tagging cancelled
- %1 - tagging cancelled
+ %1 - tagging cancelledLog parsing failed
- Log parsing failed
+ Log parsing failedGeotagging failed in trigger filtering
- Geotagging failed in trigger filtering
+ Geotagging failed in trigger filteringGeotagging failed. Requesting image #%1, but only %2 images present.
- Geotagging failed. Requesting image #%1, but only %2 images present.
+ Geotagging failed. Requesting image #%1, but only %2 images present.Geotagging failed. Couldn't write to image.
- Geotagging failed. Couldn't write to image.
+ Geotagging failed. Couldn't write to image.Geotagging failed. Couldn't write to an image.
- Geotagging failed. Couldn't write to an image.
+ Geotagging failed. Couldn't write to an image.
@@ -7839,7 +7839,7 @@ Click Ok to start the auto-tuning process.
Slide to confirm
- Slide to confirm
+ Slide to confirm
@@ -7847,7 +7847,7 @@ Click Ok to start the auto-tuning process.
Select Action
- Select Action
+ Select Action
@@ -7855,222 +7855,222 @@ Click Ok to start the auto-tuning process.
EMERGENCY STOP
- EMERGENCY STOP
+ EMERGENCY STOPArm
- Arm
+ ArmDisarm
- Disarm
+ DisarmReturn
- Return
+ ReturnTakeoff
- Takeoff
+ TakeoffLand
- Land
+ LandStart Mission
- Start Mission
+ Start MissionStart Mission (MV)
- Start Mission (MV)
+ Start Mission (MV)Continue Mission
- Continue Mission
+ Continue MissionResume FAILED
- Resume FAILED
+ Resume FAILEDPause
- Pause
+ PausePause (MV)
- Pause (MV)
+ Pause (MV)Change Altitude
- Change Altitude
+ Change AltitudeOrbit
- Orbit
+ OrbitLand Abort
- Land Abort
+ Land AbortSet Waypoint
- Set Waypoint
+ Set WaypointGo To Location
- Go To Location
+ Go To LocationReturn to the launch position of the vehicle.
- Return to the launch position of the vehicle.
+ Return to the launch position of the vehicle.VTOL Transition
- VTOL Transition
+ VTOL TransitionForce Arm
- Force Arm
+ Force ArmROI
- ROI
+ ROIAction
- Action
+ ActionArm the vehicle.
- Arm the vehicle.
+ Arm the vehicle.WARNING: This will force arming of the vehicle bypassing any safety checks.
- WARNING: This will force arming of the vehicle bypassing any safety checks.
+ WARNING: This will force arming of the vehicle bypassing any safety checks.Disarm the vehicle
- Disarm the vehicle
+ Disarm the vehicleWARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH.
- WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH.
+ WARNING: THIS WILL STOP ALL MOTORS. IF VEHICLE IS CURRENTLY IN THE AIR IT WILL CRASH.Takeoff from ground and hold position.
- Takeoff from ground and hold position.
+ Takeoff from ground and hold position.Takeoff from ground and start the current mission.
- Takeoff from ground and start the current mission.
+ Takeoff from ground and start the current mission.Continue the mission from the current waypoint.
- Continue the mission from the current waypoint.
+ Continue the mission from the current waypoint.Upload of resume mission failed. Confirm to retry upload
- Upload of resume mission failed. Confirm to retry upload
+ Upload of resume mission failed. Confirm to retry uploadLand the vehicle at the current position.
- Land the vehicle at the current position.
+ Land the vehicle at the current position.Change the altitude of the vehicle up or down.
- Change the altitude of the vehicle up or down.
+ Change the altitude of the vehicle up or down.Move the vehicle to the specified location.
- Move the vehicle to the specified location.
+ Move the vehicle to the specified location.Adjust current waypoint to %1.
- Adjust current waypoint to %1.
+ Adjust current waypoint to %1.Orbit the vehicle around the specified location.
- Orbit the vehicle around the specified location.
+ Orbit the vehicle around the specified location.Abort the landing sequence.
- Abort the landing sequence.
+ Abort the landing sequence.Pause the vehicle at it's current position, adjusting altitude up or down as needed.
- Pause the vehicle at it's current position, adjusting altitude up or down as needed.
+ Pause the vehicle at it's current position, adjusting altitude up or down as needed.Pause all vehicles at their current position.
- Pause all vehicles at their current position.
+ Pause all vehicles at their current position.Transition VTOL to fixed wing flight.
- Transition VTOL to fixed wing flight.
+ Transition VTOL to fixed wing flight.Transition VTOL to multi-rotor flight.
- Transition VTOL to multi-rotor flight.
+ Transition VTOL to multi-rotor flight.Make the specified location a Region Of Interest.
- Make the specified location a Region Of Interest.
+ Make the specified location a Region Of Interest._activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15)
- _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15)
+ _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleWasFlying(%5) _vehicleInRTLMode(%6) pauseVehicleSupported(%7) _vehiclePaused(%8) _flightMode(%9) _missionItemCount(%10) roiSupported(%11) orbitSupported(%12) _missionActive(%13) _hideROI(%14) _hideOrbit(%15)Smart RTL
- Smart RTL
+ Smart RTLInternal error: unknown actionCode
- Internal error: unknown actionCode
+ Internal error: unknown actionCode
@@ -8078,7 +8078,7 @@ Click Ok to start the auto-tuning process.
New Alt(rel)
- New Alt(rel)
+ New Alt(rel)
@@ -8086,17 +8086,17 @@ Click Ok to start the auto-tuning process.
QGroundControl User Guide
- QGroundControl User Guide
+ QGroundControl User GuidePX4 Users Discussion Forum
- PX4 Users Discussion Forum
+ PX4 Users Discussion ForumArduPilot Users Discussion Forum
- ArduPilot Users Discussion Forum
+ ArduPilot Users Discussion Forum
@@ -8105,13 +8105,13 @@ Click Ok to start the auto-tuning process.
+
- +
+ +-
- -
+ -
@@ -8119,22 +8119,22 @@ Click Ok to start the auto-tuning process.
None
- None
+ NoneColor
- Color
+ ColorOpacity
- Opacity
+ OpacityIcon
- Icon
+ Icon
@@ -8143,18 +8143,18 @@ Click Ok to start the auto-tuning process.
+
- +
+ +-
- -
+ -Reset To Defaults
- Reset To Defaults
+ Reset To Defaults
@@ -8162,76 +8162,76 @@ Click Ok to start the auto-tuning process.
Value Display
- Value Display
+ Value DisplayValuec requires a connected vehicle for setup.
- Valuec requires a connected vehicle for setup.
+ Valuec requires a connected vehicle for setup.Icon
- Icon
+ IconText
- Text
+ TextLabel
- Label
+ LabelSize
- Size
+ SizeShow Units
- Show Units
+ Show UnitsRange
- Range
+ RangeSpecify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself.
- Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself.
+ Specify the color you want to apply based on value ranges. The color will be applied to the icon if available, otherwise to the value itself.-
- -
+ -Add Row
- Add Row
+ Add RowSpecify the icon you want to display based on value ranges.
- Specify the icon you want to display based on value ranges.
+ Specify the icon you want to display based on value ranges.Specify the icon opacity you want based on value ranges.
- Specify the icon opacity you want based on value ranges.
+ Specify the icon opacity you want based on value ranges.Select Icon
- Select Icon
+ Select Icon
@@ -8239,7 +8239,7 @@ Click Ok to start the auto-tuning process.
--.--
- --.--
+ --.--
@@ -8247,122 +8247,122 @@ Click Ok to start the auto-tuning process.
No Action
- No Action
+ No ActionArm
- Arm
+ ArmDisarm
- Disarm
+ DisarmToggle Arm
- Toggle Arm
+ Toggle ArmVTOL: Fixed Wing
- VTOL: Fixed Wing
+ VTOL: Fixed WingVTOL: Multi-Rotor
- VTOL: Multi-Rotor
+ VTOL: Multi-RotorContinuous Zoom In
- Continuous Zoom In
+ Continuous Zoom InContinuous Zoom Out
- Continuous Zoom Out
+ Continuous Zoom OutStep Zoom In
- Step Zoom In
+ Step Zoom InStep Zoom Out
- Step Zoom Out
+ Step Zoom OutTrigger Camera
- Trigger Camera
+ Trigger CameraStart Recording Video
- Start Recording Video
+ Start Recording VideoStop Recording Video
- Stop Recording Video
+ Stop Recording VideoToggle Recording Video
- Toggle Recording Video
+ Toggle Recording VideoGimbal Down
- Gimbal Down
+ Gimbal DownGimbal Up
- Gimbal Up
+ Gimbal UpGimbal Left
- Gimbal Left
+ Gimbal LeftGimbal Right
- Gimbal Right
+ Gimbal RightGimbal Center
- Gimbal Center
+ Gimbal CenterEmergency Stop
- Emergency Stop
+ Emergency StopNext Video Stream
- Next Video Stream
+ Next Video StreamPrevious Video Stream
- Previous Video Stream
+ Previous Video StreamNext Camera
- Next Camera
+ Next CameraPrevious Camera
- Previous Camera
+ Previous Camera
@@ -8370,27 +8370,27 @@ Click Ok to start the auto-tuning process.
Joystick
- Joystick
+ JoystickGeneral
- General
+ GeneralButton Assigment
- Button Assigment
+ Button AssigmentCalibration
- Calibration
+ CalibrationAdvanced
- Advanced
+ Advanced
@@ -8398,72 +8398,72 @@ Click Ok to start the auto-tuning process.
Full down stick is zero throttle
- Full down stick is zero throttle
+ Full down stick is zero throttleCenter stick is zero throttle
- Center stick is zero throttle
+ Center stick is zero throttleSpring loaded throttle smoothing
- Spring loaded throttle smoothing
+ Spring loaded throttle smoothingAllow negative Thrust
- Allow negative Thrust
+ Allow negative ThrustExponential:
- Exponential:
+ Exponential:Enable further advanced settings (careful!)
- Enable further advanced settings (careful!)
+ Enable further advanced settings (careful!)Axis frequency (Hz):
- Axis frequency (Hz):
+ Axis frequency (Hz):Button repeat frequency (Hz):
- Button repeat frequency (Hz):
+ Button repeat frequency (Hz):Enable circle correction
- Enable circle correction
+ Enable circle correctionDeadbands
- Deadbands
+ DeadbandsDeadband can be set during the first
- Deadband can be set during the first
+ Deadband can be set during the first step of calibration by gently wiggling each axis.
- step of calibration by gently wiggling each axis.
+ step of calibration by gently wiggling each axis. Deadband can also be adjusted by clicking and
- Deadband can also be adjusted by clicking and
+ Deadband can also be adjusted by clicking and dragging vertically on the corresponding axis monitor.
- dragging vertically on the corresponding axis monitor.
+ dragging vertically on the corresponding axis monitor.
@@ -8476,27 +8476,27 @@ Click Ok to start the auto-tuning process.
Repeat
- Repeat
+ Repeat#
- #
+ #Function:
- Function:
+ Function: Shift Function:
- Shift Function:
+ Shift Function: No firmware support
- No firmware support
+ No firmware support
@@ -8504,22 +8504,22 @@ Click Ok to start the auto-tuning process.
Skip
- Skip
+ SkipCancel
- Cancel
+ CancelNext
- Next
+ NextStart
- Start
+ Start
@@ -8527,7 +8527,7 @@ Click Ok to start the auto-tuning process.
Detected %1 joystick axes. To operate PX4, you need at least %2 axes.
- Detected %1 joystick axes. To operate PX4, you need at least %2 axes.
+ Detected %1 joystick axes. To operate PX4, you need at least %2 axes.
@@ -8535,57 +8535,57 @@ Click Ok to start the auto-tuning process.
Enable joystick input
- Enable joystick input
+ Enable joystick inputEnable not allowed (Calibrate First)
- Enable not allowed (Calibrate First)
+ Enable not allowed (Calibrate First)Active joystick:
- Active joystick:
+ Active joystick:Active joystick name not in combo
- Active joystick name not in combo
+ Active joystick name not in comboRC Mode:
- RC Mode:
+ RC Mode:Lateral
- Lateral
+ LateralRoll
- Roll
+ RollForward
- Forward
+ ForwardPitch
- Pitch
+ PitchYaw
- Yaw
+ YawThrottle
- Throttle
+ Throttle
@@ -8593,17 +8593,17 @@ Click Ok to start the auto-tuning process.
Joystick Status
- Joystick Status
+ Joystick StatusConnected:
- Connected:
+ Connected:Enabled:
- Enabled:
+ Enabled:
@@ -8611,27 +8611,27 @@ Click Ok to start the auto-tuning process.
File open failed: file:error %1 %2
- File open failed: file:error %1 %2
+ File open failed: file:error %1 %2Unable to open file: '%1', error: %2
- Unable to open file: '%1', error: %2
+ Unable to open file: '%1', error: %2Unable to parse json file: %1 error: %2 offset: %3
- Unable to parse json file: %1 error: %2 offset: %3
+ Unable to parse json file: %1 error: %2 offset: %3Root of json file is not object: %1
- Root of json file is not object: %1
+ Root of json file is not object: %1Json file: '%1'. %2
- Json file: '%1'. %2
+ Json file: '%1'. %2
@@ -8639,43 +8639,43 @@ Click Ok to start the auto-tuning process.
KML file load failed. %1
- KML file load failed. %1
+ KML file load failed. %1File not found: %1
- File not found: %1
+ File not found: %1Unable to open file: %1 error: $%2
- Unable to open file: %1 error: $%2
+ Unable to open file: %1 error: $%2Unable to parse KML file: %1 error: %2 line: %3
- Unable to parse KML file: %1 error: %2 line: %3
+ Unable to parse KML file: %1 error: %2 line: %3No supported type found in KML file.
- No supported type found in KML file.
+ No supported type found in KML file.Unable to find Polygon node in KML
- Unable to find Polygon node in KML
+ Unable to find Polygon node in KMLInternal error: Unable to find coordinates node in KML
- Internal error: Unable to find coordinates node in KML
+ Internal error: Unable to find coordinates node in KMLUnable to find LineString node in KML
- Unable to find LineString node in KML
+ Unable to find LineString node in KML
@@ -8683,7 +8683,7 @@ Click Ok to start the auto-tuning process.
Select Polygon File
- Select Polygon File
+ Select Polygon File
@@ -8691,12 +8691,12 @@ Click Ok to start the auto-tuning process.
%1 does not support loading this complex mission item type: %2:%3
- %1 does not support loading this complex mission item type: %2:%3
+ %1 does not support loading this complex mission item type: %2:%3Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight.
- Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight.
+ Fixed Wing Landing Pattern: Setting the loiter and landing altitudes with different settings for altitude relative is no longer supported. Both have been set to relative altitude. Be sure to adjust/check your plan prior to flight.
@@ -8704,7 +8704,7 @@ Click Ok to start the auto-tuning process.
Connect not allowed: %1
- Connect not allowed: %1
+ Connect not allowed: %1
@@ -8712,38 +8712,38 @@ Click Ok to start the auto-tuning process.
%1 on %2 (AutoConnect)
- %1 on %2 (AutoConnect)
+ %1 on %2 (AutoConnect)Shutdown
- Shutdown
+ ShutdownSerial
- Serial
+ SerialUDP
- UDP
+ UDPTCP
- TCP
+ TCPMock Link
- Mock Link
+ Mock LinkLog Replay
- Log Replay
+ Log Replay
@@ -8751,87 +8751,87 @@ Click Ok to start the auto-tuning process.
Delete
- Delete
+ DeleteRemove Link Configuration
- Remove Link Configuration
+ Remove Link ConfigurationRemove %1. Is this really what you want?
- Remove %1. Is this really what you want?
+ Remove %1. Is this really what you want?Edit
- Edit
+ EditAdd
- Add
+ AddConnect
- Connect
+ ConnectDisconnect
- Disconnect
+ DisconnectMockLink Options
- MockLink Options
+ MockLink OptionsEdit Link Configuration Settings
- Edit Link Configuration Settings
+ Edit Link Configuration SettingsCreate New Link Configuration
- Create New Link Configuration
+ Create New Link ConfigurationName
- Name
+ NameEnter name
- Enter name
+ Enter nameAutomatically Connect on Start
- Automatically Connect on Start
+ Automatically Connect on StartHigh Latency
- High Latency
+ High LatencyType
- Type
+ TypeOK
- OK
+ OKCancel
- Cancel
+ Cancel
@@ -8839,22 +8839,22 @@ Click Ok to start the auto-tuning process.
Log Compressor: Cannot start/compress log file, since input file %1 is not readable
- Log Compressor: Cannot start/compress log file, since input file %1 is not readable
+ Log Compressor: Cannot start/compress log file, since input file %1 is not readableLog Compressor: Cannot start/compress log file, since output file %1 is not writable
- Log Compressor: Cannot start/compress log file, since output file %1 is not writable
+ Log Compressor: Cannot start/compress log file, since output file %1 is not writableLog compressor: Dataset contains dimensions:
- Log compressor: Dataset contains dimensions:
+ Log compressor: Dataset contains dimensions: Log Compressor
- Log Compressor
+ Log Compressor
@@ -8862,40 +8862,40 @@ Click Ok to start the auto-tuning process.
Available
- Available
+ AvailableCanceled
- Canceled
+ CanceledError
- Error
+ ErrorDownloaded
- Downloaded
+ DownloadedTimed Out
- Timed Out
+ Timed OutWaiting
- Waiting
+ WaitingUnknownDate
- UnknownDate
+ UnknownDate
@@ -8903,77 +8903,77 @@ Click Ok to start the auto-tuning process.
Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs.
- Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs.
+ Log Download allows you to download binary log files from your vehicle. Click Refresh to get list of available logs.Id
- Id
+ IdDate
- Date
+ DateDate Unknown
- Date Unknown
+ Date UnknownSize
- Size
+ SizeStatus
- Status
+ StatusRefresh
- Refresh
+ RefreshLog Refresh
- Log Refresh
+ Log RefreshYou must be connected to a vehicle in order to download logs.
- You must be connected to a vehicle in order to download logs.
+ You must be connected to a vehicle in order to download logs.Download
- Download
+ DownloadSelect save directory
- Select save directory
+ Select save directoryErase All
- Erase All
+ Erase AllDelete All Log Files
- Delete All Log Files
+ Delete All Log FilesAll log files will be erased permanently. Is this really what you want?
- All log files will be erased permanently. Is this really what you want?
+ All log files will be erased permanently. Is this really what you want?Cancel
- Cancel
+ Cancel
@@ -8981,38 +8981,38 @@ Click Ok to start the auto-tuning process.
Log Replay Error
- Log Replay Error
+ Log Replay ErrorYou must close all connections prior to replaying a log.
- You must close all connections prior to replaying a log.
+ You must close all connections prior to replaying a log.Attempt to load new log while log being played
- Attempt to load new log while log being played
+ Attempt to load new log while log being playedUnable to open log file: '%1', error: %2
- Unable to open log file: '%1', error: %2
+ Unable to open log file: '%1', error: %2The log file '%1' is corrupt or empty.
- The log file '%1' is corrupt or empty.
+ The log file '%1' is corrupt or empty.Connect not allowed during Flight Data replay.
- Connect not allowed during Flight Data replay.
+ Connect not allowed during Flight Data replay.Unable to seek to new position
- Unable to seek to new position
+ Unable to seek to new position
@@ -9020,7 +9020,7 @@ Click Ok to start the auto-tuning process.
Log Replay Link Settings
- Log Replay Link Settings
+ Log Replay Link Settings
@@ -9028,12 +9028,12 @@ Click Ok to start the auto-tuning process.
%2m:%3s
- %2m:%3s
+ %2m:%3s%1h:%2m:%3s
- %1h:%2m:%3s
+ %1h:%2m:%3s
@@ -9041,27 +9041,27 @@ Click Ok to start the auto-tuning process.
Log File
- Log File
+ Log FileBrowse
- Browse
+ BrowseSelect Telemetery Log
- Select Telemetery Log
+ Select Telemetery LogTelemetry Logs (*.%1)
- Telemetry Logs (*.%1)
+ Telemetry Logs (*.%1)All Files (*)
- All Files (*)
+ All Files (*)
@@ -9069,47 +9069,47 @@ Click Ok to start the auto-tuning process.
Log Replay
- Log Replay
+ Log ReplayYou must close all connections prior to replaying a log.
- You must close all connections prior to replaying a log.
+ You must close all connections prior to replaying a log.Select Telemetery Log
- Select Telemetery Log
+ Select Telemetery LogTelemetry Logs (*.%1)
- Telemetry Logs (*.%1)
+ Telemetry Logs (*.%1)All Files (*)
- All Files (*)
+ All Files (*)Pause
- Pause
+ PausePlay
- Play
+ PlayLoad Telemetry Log
- Load Telemetry Log
+ Load Telemetry LogClose
- Close
+ Close
@@ -9117,152 +9117,152 @@ Click Ok to start the auto-tuning process.
Gyro
- Gyro
+ GyroAccelerometer
- Accelerometer
+ AccelerometerMagnetometer
- Magnetometer
+ MagnetometerAbsolute pressure
- Absolute pressure
+ Absolute pressureDifferential pressure
- Differential pressure
+ Differential pressureGPS
- GPS
+ GPSOptical flow
- Optical flow
+ Optical flowComputer vision position
- Computer vision position
+ Computer vision positionLaser based position
- Laser based position
+ Laser based positionExternal ground truth
- External ground truth
+ External ground truthAngular rate control
- Angular rate control
+ Angular rate controlAttitude stabilization
- Attitude stabilization
+ Attitude stabilizationYaw position
- Yaw position
+ Yaw positionZ/altitude control
- Z/altitude control
+ Z/altitude controlX/Y position control
- X/Y position control
+ X/Y position controlMotor outputs / control
- Motor outputs / control
+ Motor outputs / controlRC receiver
- RC receiver
+ RC receiverGyro 2
- Gyro 2
+ Gyro 2Accelerometer 2
- Accelerometer 2
+ Accelerometer 2Magnetometer 2
- Magnetometer 2
+ Magnetometer 2GeoFence
- GeoFence
+ GeoFenceAHRS
- AHRS
+ AHRSTerrain
- Terrain
+ TerrainMotors reversed
- Motors reversed
+ Motors reversedLogging
- Logging
+ LoggingBattery
- Battery
+ BatteryProximity
- Proximity
+ ProximitySatellite Communication
- Satellite Communication
+ Satellite CommunicationPre-Arm Check
- Pre-Arm Check
+ Pre-Arm CheckAvoidance/collision prevention
- Avoidance/collision prevention
+ Avoidance/collision prevention
@@ -9270,7 +9270,7 @@ Click Ok to start the auto-tuning process.
Unknown sensor
- Unknown sensor
+ Unknown sensor
@@ -9278,12 +9278,12 @@ Click Ok to start the auto-tuning process.
Scale:
- Scale:
+ Scale:Range:
- Range:
+ Range:
@@ -9291,79 +9291,79 @@ Click Ok to start the auto-tuning process.
5 Sec
- 5 Sec
+ 5 Sec10 Sec
- 10 Sec
+ 10 Sec30 Sec
- 30 Sec
+ 30 Sec60 Sec
- 60 Sec
+ 60 SecAuto
- Auto
+ Auto10,000
- 10,000
+ 10,0001,000
- 1,000
+ 1,000100
- 100
+ 10010
- 10
+ 101
- 1
+ 10.1
- 0.1
+ 0.10.01
- 0.01
+ 0.010.001
- 0.001
+ 0.0010.0001
- 0.0001
+ 0.0001System %1
- System %1
+ System %1
@@ -9371,47 +9371,47 @@ Click Ok to start the auto-tuning process.
Inspect real time MAVLink messages.
- Inspect real time MAVLink messages.
+ Inspect real time MAVLink messages.Message:
- Message:
+ Message:Component:
- Component:
+ Component:Count:
- Count:
+ Count:Name
- Name
+ NameValue
- Value
+ ValueType
- Type
+ TypePlot 1
- Plot 1
+ Plot 1Plot 2
- Plot 2
+ Plot 2
@@ -9422,28 +9422,28 @@ Click Ok to start the auto-tuning process.
MAVLink Protocol
- MAVLink Protocol
+ MAVLink ProtocolMAVLink Logging failed. Could not write to file %1, logging disabled.
- MAVLink Logging failed. Could not write to file %1, logging disabled.
+ MAVLink Logging failed. Could not write to file %1, logging disabled.Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware.
- Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware.
+ Detected radio still using MAVLink v1.0 on a link with MAVLink v2.0 enabled. Please upgrade the radio firmware.MAVLink protocol
- MAVLink protocol
+ MAVLink protocolOpening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location.
- Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location.
+ Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location.
@@ -9453,60 +9453,60 @@ Click Ok to start the auto-tuning process.
%1 close
- %1 close
+ %1 closeThere are still active connections to vehicles. Are you sure you want to exit?
- There are still active connections to vehicles. Are you sure you want to exit?
+ There are still active connections to vehicles. Are you sure you want to exit?You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close?
- You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close?
+ You have a mission edit in progress which has not been saved/sent. If you close you will lose changes. Are you sure you want to close?Analyze Tools
- Analyze Tools
+ Analyze ToolsVehicle Setup
- Vehicle Setup
+ Vehicle SetupApplication Settings
- Application Settings
+ Application SettingsYou have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close?
- You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close?
+ You have pending parameter updates to a vehicle. If you close you will lose changes. Are you sure you want to close?Select Tool
- Select Tool
+ Select Tool%1 Version
- %1 Version
+ %1 VersionAdvanced Mode
- Advanced Mode
+ Advanced ModeBack
- Back
+ Back
@@ -9514,77 +9514,77 @@ Click Ok to start the auto-tuning process.
Communication Lost
- Communication Lost
+ Communication LostReady To Fly
- Ready To Fly
+ Ready To FlyNot Ready
- Not Ready
+ Not ReadyDisconnected
- Disconnected
+ DisconnectedArmed
- Armed
+ ArmedFlying
- Flying
+ FlyingLanding
- Landing
+ LandingFW(vtol)
- FW(vtol)
+ FW(vtol)MR(vtol)
- MR(vtol)
+ MR(vtol)Sensor Status
- Sensor Status
+ Sensor StatusDisarm
- Disarm
+ DisarmForce Arm
- Force Arm
+ Force ArmArm
- Arm
+ ArmTransition to Multi-Rotor
- Transition to Multi-Rotor
+ Transition to Multi-RotorTransition to Fixed Wing
- Transition to Fixed Wing
+ Transition to Fixed Wing
@@ -9592,17 +9592,17 @@ Click Ok to start the auto-tuning process.
Downloading
- Downloading
+ DownloadingClick anywhere to hide
- Click anywhere to hide
+ Click anywhere to hideDisconnect
- Disconnect
+ Disconnect
@@ -9610,42 +9610,42 @@ Click Ok to start the auto-tuning process.
km
- km
+ km m
- m
+ m mile
- mile
+ mile miles
- miles
+ miles ft
- ft
+ ftT
- T
+ T+
- +
+ +-
- -
+ -
@@ -9653,22 +9653,22 @@ Click Ok to start the auto-tuning process.
Provides a connection to the vehicle's system shell.
- Provides a connection to the vehicle's system shell.
+ Provides a connection to the vehicle's system shell.Copy
- Copy
+ CopyPaste
- Paste
+ PasteSend
- Send
+ Send
@@ -9676,102 +9676,102 @@ Click Ok to start the auto-tuning process.
MAVLink Logging
- MAVLink Logging
+ MAVLink LoggingPlease enter an email address before uploading MAVLink log files.
- Please enter an email address before uploading MAVLink log files.
+ Please enter an email address before uploading MAVLink log files.Ground Station
- Ground Station
+ Ground StationMAVLink System ID:
- MAVLink System ID:
+ MAVLink System ID:Emit heartbeat
- Emit heartbeat
+ Emit heartbeatOnly accept MAVs with same protocol version
- Only accept MAVs with same protocol version
+ Only accept MAVs with same protocol versionEnable MAVLink forwarding
- Enable MAVLink forwarding
+ Enable MAVLink forwardingHost name:
- Host name:
+ Host name:<i> Changing the host name requires restart of application. </i>
- <i> Changing the host name requires restart of application. </i>
+ <i> Changing the host name requires restart of application. </i>Telemetry Stream Rates (ArduPilot Only)
- Telemetry Stream Rates (ArduPilot Only)
+ Telemetry Stream Rates (ArduPilot Only)All Streams Controlled By Vehicle Settings
- All Streams Controlled By Vehicle Settings
+ All Streams Controlled By Vehicle SettingsRaw Sensors
- Raw Sensors
+ Raw SensorsExtended Status
- Extended Status
+ Extended StatusRC Channel
- RC Channel
+ RC ChannelPosition
- Position
+ PositionExtra 1
- Extra 1
+ Extra 1Extra 2
- Extra 2
+ Extra 2Extra 3
- Extra 3
+ Extra 3MAVLink Link Status (Current Vehicle)
- MAVLink Link Status (Current Vehicle)
+ MAVLink Link Status (Current Vehicle)Total messages sent (computed):
- Total messages sent (computed):
+ Total messages sent (computed):
@@ -9779,167 +9779,167 @@ Click Ok to start the auto-tuning process.
Not Connected
- Not Connected
+ Not ConnectedTotal messages received:
- Total messages received:
+ Total messages received:Total message loss:
- Total message loss:
+ Total message loss:Loss rate:
- Loss rate:
+ Loss rate:MAVLink 2.0 Logging (PX4 Pro Only)
- MAVLink 2.0 Logging (PX4 Pro Only)
+ MAVLink 2.0 Logging (PX4 Pro Only)Manual Start/Stop:
- Manual Start/Stop:
+ Manual Start/Stop:Start Logging
- Start Logging
+ Start LoggingStop Logging
- Stop Logging
+ Stop LoggingEnable automatic logging
- Enable automatic logging
+ Enable automatic loggingMAVLink 2.0 Log Uploads (PX4 Pro Only)
- MAVLink 2.0 Log Uploads (PX4 Pro Only)
+ MAVLink 2.0 Log Uploads (PX4 Pro Only)Email address for Log Upload:
- Email address for Log Upload:
+ Email address for Log Upload:Default Description:
- Default Description:
+ Default Description:Default Upload URL
- Default Upload URL
+ Default Upload URLVideo URL:
- Video URL:
+ Video URL:Wind Speed:
- Wind Speed:
+ Wind Speed:Flight Rating:
- Flight Rating:
+ Flight Rating:Additional Feedback:
- Additional Feedback:
+ Additional Feedback:Make this log publicly available
- Make this log publicly available
+ Make this log publicly availableEnable automatic log uploads
- Enable automatic log uploads
+ Enable automatic log uploadsDelete log file after uploading
- Delete log file after uploading
+ Delete log file after uploadingSaved Log Files
- Saved Log Files
+ Saved Log FilesUploaded
- Uploaded
+ UploadedCheck All
- Check All
+ Check AllCheck None
- Check None
+ Check NoneDelete Selected
- Delete Selected
+ Delete SelectedDelete Selected Log Files
- Delete Selected Log Files
+ Delete Selected Log FilesConfirm deleting selected log files?
- Confirm deleting selected log files?
+ Confirm deleting selected log files?Upload Selected
- Upload Selected
+ Upload SelectedUpload Selected Log Files
- Upload Selected Log Files
+ Upload Selected Log FilesConfirm uploading selected log files?
- Confirm uploading selected log files?
+ Confirm uploading selected log files?Cancel
- Cancel
+ CancelCancel Upload
- Cancel Upload
+ Cancel UploadConfirm canceling the upload process?
- Confirm canceling the upload process?
+ Confirm canceling the upload process?
@@ -9947,7 +9947,7 @@ Click Ok to start the auto-tuning process.
No Messages
- No Messages
+ No Messages
@@ -9955,95 +9955,95 @@ Click Ok to start the auto-tuning process.
General
- General
+ GeneralEnable Microhard
- Enable Microhard
+ Enable MicrohardConnection Status
- Connection Status
+ Connection StatusGround Unit:
- Ground Unit:
+ Ground Unit:Connected
- Connected
+ ConnectedLogin Error
- Login Error
+ Login ErrorNot Connected
- Not Connected
+ Not ConnectedAir Unit:
- Air Unit:
+ Air Unit:Uplink RSSI:
- Uplink RSSI:
+ Uplink RSSI:Downlink RSSI:
- Downlink RSSI:
+ Downlink RSSI:Network Settings
- Network Settings
+ Network SettingsLocal IP Address:
- Local IP Address:
+ Local IP Address:Remote IP Address:
- Remote IP Address:
+ Remote IP Address:Network Mask:
- Network Mask:
+ Network Mask:Configuration User Name:
- Configuration User Name:
+ Configuration User Name:Configuration Password:
- Configuration Password:
+ Configuration Password:Encryption key:
- Encryption key:
+ Encryption key:Apply
- Apply
+ Apply
@@ -10051,7 +10051,7 @@ Click Ok to start the auto-tuning process.
Category:
- Category:
+ Category:
@@ -10059,7 +10059,7 @@ Click Ok to start the auto-tuning process.
All commands
- All commands
+ All commands
@@ -10067,39 +10067,39 @@ Click Ok to start the auto-tuning process.
Mission item %1 is not an object
- Mission item %1 is not an object
+ Mission item %1 is not an objectUnsupported complex item type: %1
- Unsupported complex item type: %1
+ Unsupported complex item type: %1Unknown item type: %1
- Unknown item type: %1
+ Unknown item type: %1Could not find doJumpId: %1
- Could not find doJumpId: %1
+ Could not find doJumpId: %1The mission file is corrupted.
- The mission file is corrupted.
+ The mission file is corrupted.The mission file is not compatible with this version of %1.
- The mission file is not compatible with this version of %1.
+ The mission file is not compatible with this version of %1.Mission: %1
- Mission: %1
+ Mission: %1
@@ -10107,17 +10107,17 @@ Click Ok to start the auto-tuning process.
Type found: %1 must be: %2
- Type found: %1 must be: %2
+ Type found: %1 must be: %2%1 key must contains 7 values
- %1 key must contains 7 values
+ %1 key must contains 7 valuesParam %1 incorrect type %2, must be double or null
- Param %1 incorrect type %2, must be double or null
+ Param %1 incorrect type %2, must be double or null
@@ -10126,52 +10126,52 @@ Click Ok to start the auto-tuning process.
?Indicator in Plan view to show mission item is not ready for save/send
- ?
+ ?Move to vehicle position
- Move to vehicle position
+ Move to vehicle positionMove to previous item position
- Move to previous item position
+ Move to previous item positionEdit position...
- Edit position...
+ Edit position...Edit Position
- Edit Position
+ Edit PositionShow all values
- Show all values
+ Show all valuesMission Edit
- Mission Edit
+ Mission EditYou have made changes to the mission item which cannot be shown in Simple Mode
- You have made changes to the mission item which cannot be shown in Simple Mode
+ You have made changes to the mission item which cannot be shown in Simple ModeItem #%1
- Item #%1
+ Item #%1Select Mission Command
- Select Mission Command
+ Select Mission Command
@@ -10179,7 +10179,7 @@ Click Ok to start the auto-tuning process.
Terrain Altitude
- Terrain Altitude
+ Terrain Altitude
@@ -10187,7 +10187,7 @@ Click Ok to start the auto-tuning process.
Unable to generate resume mission due to MAV_CMD_DO_JUMP command.
- Unable to generate resume mission due to MAV_CMD_DO_JUMP command.
+ Unable to generate resume mission due to MAV_CMD_DO_JUMP command.
@@ -10195,72 +10195,72 @@ Click Ok to start the auto-tuning process.
Firmware
- Firmware
+ FirmwareVehicle
- Vehicle
+ VehicleFlight speed
- Flight speed
+ Flight speedAbove camera commands will take affect immediately upon mission start.
- Above camera commands will take affect immediately upon mission start.
+ Above camera commands will take affect immediately upon mission start.Launch Position
- Launch Position
+ Launch PositionSet To Map Center
- Set To Map Center
+ Set To Map CenterVehicle Info
- Vehicle Info
+ Vehicle InfoAll Altitudes
- All Altitudes
+ All AltitudesInitial Waypoint Alt
- Initial Waypoint Alt
+ Initial Waypoint AltThe following speed values are used to calculate total mission time. They do not affect the flight speed for the mission.
- The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission.
+ The following speed values are used to calculate total mission time. They do not affect the flight speed for the mission.Cruise speed
- Cruise speed
+ Cruise speedHover speed
- Hover speed
+ Hover speedAltitude
- Altitude
+ AltitudeActual position set by vehicle at flight time.
- Actual position set by vehicle at flight time.
+ Actual position set by vehicle at flight time.
@@ -10268,12 +10268,12 @@ Click Ok to start the auto-tuning process.
L
- L
+ LLaunch
- Launch
+ Launch
@@ -10281,7 +10281,7 @@ Click Ok to start the auto-tuning process.
Mock Link Settings
- Mock Link Settings
+ Mock Link Settings
@@ -10289,42 +10289,42 @@ Click Ok to start the auto-tuning process.
PX4 Vehicle
- PX4 Vehicle
+ PX4 VehicleAPM ArduCopter Vehicle
- APM ArduCopter Vehicle
+ APM ArduCopter VehicleAPM ArduPlane Vehicle
- APM ArduPlane Vehicle
+ APM ArduPlane VehicleAPM ArduSub Vehicle
- APM ArduSub Vehicle
+ APM ArduSub VehicleAPM ArduRover Vehicle
- APM ArduRover Vehicle
+ APM ArduRover VehicleGeneric Vehicle
- Generic Vehicle
+ Generic VehicleSend status text + voice
- Send status text + voice
+ Send status text + voiceStop One MockLink
- Stop One MockLink
+ Stop One MockLink
@@ -10332,22 +10332,22 @@ Click Ok to start the auto-tuning process.
MockLink Options
- MockLink Options
+ MockLink OptionsStop Heartbeats
- Stop Heartbeats
+ Stop HeartbeatsStart Heartbeats
- Start Heartbeats
+ Start HeartbeatsConnection Removed
- Connection Removed
+ Connection Removed
@@ -10355,47 +10355,47 @@ Click Ok to start the auto-tuning process.
Send Status Text and Voice
- Send Status Text and Voice
+ Send Status Text and VoiceIncrement Vehicle Id
- Increment Vehicle Id
+ Increment Vehicle IdFirmware
- Firmware
+ FirmwarePX4 Pro
- PX4 Pro
+ PX4 ProArduPilot
- ArduPilot
+ ArduPilotGeneric MAVLink
- Generic MAVLink
+ Generic MAVLinkVehicle Type
- Vehicle Type
+ Vehicle TypeArduCopter
- ArduCopter
+ ArduCopterArduPlane
- ArduPlane
+ ArduPlane
@@ -10403,12 +10403,12 @@ Click Ok to start the auto-tuning process.
Monitor:
- Monitor:
+ Monitor:Threshold:
- Threshold:
+ Threshold:
@@ -10416,37 +10416,37 @@ Click Ok to start the auto-tuning process.
Warning: Unable to determine motor count
- Warning: Unable to determine motor count
+ Warning: Unable to determine motor countAll
- All
+ AllMoving the sliders will causes the motors to spin. Make sure you remove all props.
- Moving the sliders will causes the motors to spin. Make sure you remove all props.
+ Moving the sliders will causes the motors to spin. Make sure you remove all props.Propellers are removed - Enable motor sliders
- Propellers are removed - Enable motor sliders
+ Propellers are removed - Enable motor slidersCareful: Motor sliders are enabled
- Careful: Motor sliders are enabled
+ Careful: Motor sliders are enabledMotors
- Motors
+ MotorsMotors Setup is used to manually test motor control and direction.
- Motors Setup is used to manually test motor control and direction.
+ Motors Setup is used to manually test motor control and direction.
@@ -10454,77 +10454,77 @@ Click Ok to start the auto-tuning process.
Multirotor Initial Checks
- Multirotor Initial Checks
+ Multirotor Initial ChecksHardware
- Hardware
+ HardwareProps mounted and secured?
- Props mounted and secured?
+ Props mounted and secured?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereMotors
- Motors
+ MotorsPropellers free? Then throttle up gently. Working properly?
- Propellers free? Then throttle up gently. Working properly?
+ Propellers free? Then throttle up gently. Working properly?Mission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?Wind & weather
- Wind & weather
+ Wind & weatherOK for your platform?
- OK for your platform?
+ OK for your platform?Flight area
- Flight area
+ Flight areaLaunch area and path free of obstacles/people?
- Launch area and path free of obstacles/people?
+ Launch area and path free of obstacles/people?
@@ -10532,17 +10532,17 @@ Click Ok to start the auto-tuning process.
The following commands will be applied to all vehicles
- The following commands will be applied to all vehicles
+ The following commands will be applied to all vehiclesArmed
- Armed
+ ArmedDisarmed
- Disarmed
+ Disarmed
@@ -10550,12 +10550,12 @@ Click Ok to start the auto-tuning process.
Warning: A vehicle is using the same system id as %1: %2
- Warning: A vehicle is using the same system id as %1: %2
+ Warning: A vehicle is using the same system id as %1: %2Connected to Vehicle %1
- Connected to Vehicle %1
+ Connected to Vehicle %1
@@ -10563,7 +10563,7 @@ Click Ok to start the auto-tuning process.
Vehicle
- Vehicle
+ Vehicle
@@ -10571,89 +10571,89 @@ Click Ok to start the auto-tuning process.
Error Message
- Error Message
+ Error MessageMax Cache Disk Size (MB):
- Max Cache Disk Size (MB):
+ Max Cache Disk Size (MB):Max Cache Memory Size (MB):
- Max Cache Memory Size (MB):
+ Max Cache Memory Size (MB):Memory cache changes require a restart to take effect.
- Memory cache changes require a restart to take effect.
+ Memory cache changes require a restart to take effect.Mapbox Access Token
- Mapbox Access Token
+ Mapbox Access TokenTo enable Mapbox maps, enter your access token.
- To enable Mapbox maps, enter your access token.
+ To enable Mapbox maps, enter your access token.Mapbox User Name
- Mapbox User Name
+ Mapbox User NameTo enable custom Mapbox styles, enter your account name.
- To enable custom Mapbox styles, enter your account name.
+ To enable custom Mapbox styles, enter your account name.Mapbox Style ID
- Mapbox Style ID
+ Mapbox Style IDTo enable custom Mapbox styles, enter your style ID.
- To enable custom Mapbox styles, enter your style ID.
+ To enable custom Mapbox styles, enter your style ID.Esri Access Token
- Esri Access Token
+ Esri Access TokenTo enable Esri maps, enter your access token.
- To enable Esri maps, enter your access token.
+ To enable Esri maps, enter your access token.VWorld Access Token
- VWorld Access Token
+ VWorld Access TokenTo enable VWorld maps, enter your access token.
- To enable VWorld maps, enter your access token.
+ To enable VWorld maps, enter your access token.Custom Map URL
- Custom Map URL
+ Custom Map URLURL with {x} {y} {z} or {zoom} substitutions
- URL with {x} {y} {z} or {zoom} substitutions
+ URL with {x} {y} {z} or {zoom} substitutionsThis will delete all tiles INCLUDING the tile sets you have created yourself.
Is this really what you want?
- This will delete all tiles INCLUDING the tile sets you have created yourself.
+ This will delete all tiles INCLUDING the tile sets you have created yourself.
Is this really what you want?
@@ -10662,82 +10662,82 @@ Is this really what you want?
Delete %1 and all its tiles.
Is this really what you want?
- Delete %1 and all its tiles.
+ Delete %1 and all its tiles.
Is this really what you want?System Wide Tile Cache
- System Wide Tile Cache
+ System Wide Tile CacheZoom Levels:
- Zoom Levels:
+ Zoom Levels:Total:
- Total:
+ Total:Unique:
- Unique:
+ Unique:Downloaded:
- Downloaded:
+ Downloaded:Error Count:
- Error Count:
+ Error Count:Size:
- Size:
+ Size:Tile Count:
- Tile Count:
+ Tile Count:Resume Download
- Resume Download
+ Resume DownloadCancel Download
- Cancel Download
+ Cancel DownloadDelete
- Delete
+ DeleteConfirm Delete
- Confirm Delete
+ Confirm DeleteOk
- Ok
+ OkClose
- Close
+ Close
@@ -10745,140 +10745,140 @@ Is this really what you want?Cancel
- Cancel
+ CancelMin Zoom: %1
- Min Zoom: %1
+ Min Zoom: %1Max Zoom: %1
- Max Zoom: %1
+ Max Zoom: %1Add New Set
- Add New Set
+ Add New SetName:
- Name:
+ Name:Map type:
- Map type:
+ Map type:Fetch elevation data
- Fetch elevation data
+ Fetch elevation dataMin/Max Zoom Levels
- Min/Max Zoom Levels
+ Min/Max Zoom LevelsEst Size:
- Est Size:
+ Est Size:Too many tiles
- Too many tiles
+ Too many tilesDownload
- Download
+ DownloadImport
- Import
+ ImportExport
- Export
+ ExportOptions
- Options
+ OptionsOffline Maps Options
- Offline Maps Options
+ Offline Maps OptionsSelect Tile Sets to Export
- Select Tile Sets to Export
+ Select Tile Sets to ExportSelect All
- Select All
+ Select AllSelect None
- Select None
+ Select NoneExport Tile Set
- Export Tile Set
+ Export Tile SetTile Set Export Progress
- Tile Set Export Progress
+ Tile Set Export ProgressTile Set Export Completed
- Tile Set Export Completed
+ Tile Set Export CompletedMap Tile Set Import
- Map Tile Set Import
+ Map Tile Set ImportMap Tile Set Import Progress
- Map Tile Set Import Progress
+ Map Tile Set Import ProgressMap Tile Set Import Completed
- Map Tile Set Import Completed
+ Map Tile Set Import CompletedAppend to existing set
- Append to existing set
+ Append to existing setReplace existing set
- Replace existing set
+ Replace existing setImport Tile Set
- Import Tile Set
+ Import Tile Set
@@ -10886,22 +10886,22 @@ Is this really what you want?
Vehicle Information
- Vehicle Information
+ Vehicle InformationSpecify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is.
- Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is.
+ Specify information about the vehicle you plan to fly. If you are unsure of the correct values leave them as is.Firmware
- Firmware
+ FirmwareVehicle
- Vehicle
+ Vehicle
@@ -10909,62 +10909,62 @@ Is this really what you want?
Autotune enabled
- Autotune enabled
+ Autotune enabledAutotune disabled
- Autotune disabled
+ Autotune disabledSelect Tuning:
- Select Tuning:
+ Select Tuning:Clipboard Values:
- Clipboard Values:
+ Clipboard Values:Save To Clipboard
- Save To Clipboard
+ Save To ClipboardRestore From Clipboard
- Restore From Clipboard
+ Restore From ClipboardClear
- Clear
+ ClearStop
- Stop
+ StopStart
- Start
+ StartAutomatic Flight Mode Switching
- Automatic Flight Mode Switching
+ Automatic Flight Mode SwitchingSwitches to 'Stabilized' when you click Start.
- Switches to 'Stabilized' when you click Start.
+ Switches to 'Stabilized' when you click Start.Switches to '%1' when you click Stop.
- Switches to '%1' when you click Stop.
+ Switches to '%1' when you click Stop.
@@ -10973,61 +10973,61 @@ Is this really what you want?
FLIGHT MODES
- FLIGHT MODES
+ FLIGHT MODESAssign Flight Modes to radio control channels and adjust the thresholds for triggering them.
- Assign Flight Modes to radio control channels and adjust the thresholds for triggering them.
+ Assign Flight Modes to radio control channels and adjust the thresholds for triggering them.Assign Flight Modes to radio control channels and adjust the thresholds for triggering them.
- Assign Flight Modes to radio control channels and adjust the thresholds for triggering them.
+ Assign Flight Modes to radio control channels and adjust the thresholds for triggering them. You can assign multiple flight modes to a single channel.
- You can assign multiple flight modes to a single channel.
+ You can assign multiple flight modes to a single channel. Turn your radio control on to test switch settings.
- Turn your radio control on to test switch settings.
+ Turn your radio control on to test switch settings. The following channels:
- The following channels:
+ The following channels: are not available for Flight Modes since they are already in use for other functions.
- are not available for Flight Modes since they are already in use for other functions.
+ are not available for Flight Modes since they are already in use for other functions.Manual/Main
- Manual/Main
+ Manual/MainStabilized/Main
- Stabilized/Main
+ Stabilized/MainThe pilot has full control of the aircraft, no assistance is provided.
- The pilot has full control of the aircraft, no assistance is provided.
+ The pilot has full control of the aircraft, no assistance is provided.
@@ -11035,211 +11035,211 @@ Is this really what you want?
The Main mode switch must always be assigned to a channel in order to fly
- The Main mode switch must always be assigned to a channel in order to fly
+ The Main mode switch must always be assigned to a channel in order to flyThe pilot has full control of the aircraft, only attitude is stabilized.
- The pilot has full control of the aircraft, only attitude is stabilized.
+ The pilot has full control of the aircraft, only attitude is stabilized. Assist
- Assist
+ AssistIf Position Control is placed on a separate channel from the Main mode channel, an additional 'Assist' mode is added to the Main switch.
- If Position Control is placed on a separate channel from the Main mode channel, an additional 'Assist' mode is added to the Main switch.
+ If Position Control is placed on a separate channel from the Main mode channel, an additional 'Assist' mode is added to the Main switch. In order for the Attitude Control/Position Control switch to be active, the Main switch must be in Assist mode.
- In order for the Attitude Control/Position Control switch to be active, the Main switch must be in Assist mode.
+ In order for the Attitude Control/Position Control switch to be active, the Main switch must be in Assist mode.Auto
- Auto
+ AutoIf Loiter is placed on a separate channel from the Main mode channel, an additional 'Auto' mode is added to the Main switch.
- If Loiter is placed on a separate channel from the Main mode channel, an additional 'Auto' mode is added to the Main switch.
+ If Loiter is placed on a separate channel from the Main mode channel, an additional 'Auto' mode is added to the Main switch. In order for the Mission/Loiter switch to be active, the Main switch must be in Auto mode.
- In order for the Mission/Loiter switch to be active, the Main switch must be in Auto mode.
+ In order for the Mission/Loiter switch to be active, the Main switch must be in Auto mode.Stabilized
- Stabilized
+ StabilizedAcro
- Acro
+ AcroRoll/pitch angles and rudder deflection are controlled.
- Roll/pitch angles and rudder deflection are controlled.
+ Roll/pitch angles and rudder deflection are controlled. The angular rates are controlled, but not the attitude.
- The angular rates are controlled, but not the attitude.
+ The angular rates are controlled, but not the attitude. Altitude
- Altitude
+ AltitudeRoll stick controls banking, pitch stick altitude
- Roll stick controls banking, pitch stick altitude
+ Roll stick controls banking, pitch stick altitude Throttle stick controls speed.
- Throttle stick controls speed.
+ Throttle stick controls speed. With no stick inputs the plane holds heading, but drifts off in wind.
- With no stick inputs the plane holds heading, but drifts off in wind.
+ With no stick inputs the plane holds heading, but drifts off in wind. Same as Stablized mode except that Throttle controls climb/sink rate. Centered Throttle holds altitude steady.
- Same as Stablized mode except that Throttle controls climb/sink rate. Centered Throttle holds altitude steady.
+ Same as Stablized mode except that Throttle controls climb/sink rate. Centered Throttle holds altitude steady. Position Control
- Position Control
+ Position ControlRoll stick controls banking, pitch stick controls altitude.
- Roll stick controls banking, pitch stick controls altitude.
+ Roll stick controls banking, pitch stick controls altitude. Throttle stick controls speed.
- Throttle stick controls speed.
+ Throttle stick controls speed.With no stick inputs the plane flies a straight line, even in wind.
- With no stick inputs the plane flies a straight line, even in wind.
+ With no stick inputs the plane flies a straight line, even in wind. Roll and Pitch sticks control sideways and forward speed
- Roll and Pitch sticks control sideways and forward speed
+ Roll and Pitch sticks control sideways and forward speed Throttle stick controls climb / sink rade.
- Throttle stick controls climb / sink rade.
+ Throttle stick controls climb / sink rade. Mission
- Mission
+ MissionThe aircraft obeys the programmed mission sent by QGroundControl.
- The aircraft obeys the programmed mission sent by QGroundControl.
+ The aircraft obeys the programmed mission sent by QGroundControl. Hold
- Hold
+ HoldThe aircraft flies in a circle around the current position at the current altitude.
- The aircraft flies in a circle around the current position at the current altitude.
+ The aircraft flies in a circle around the current position at the current altitude. The multirotor hovers at the current position and altitude.
- The multirotor hovers at the current position and altitude.
+ The multirotor hovers at the current position and altitude. Return
- Return
+ ReturnThe vehicle returns to the launch position, loiters and then lands.
- The vehicle returns to the launch position, loiters and then lands.
+ The vehicle returns to the launch position, loiters and then lands. Offboard
- Offboard
+ OffboardAll flight control aspects are controlled by an offboard system.
- All flight control aspects are controlled by an offboard system.
+ All flight control aspects are controlled by an offboard system.Flight Mode Config is disabled since you have a Joystick enabled.
- Flight Mode Config is disabled since you have a Joystick enabled.
+ Flight Mode Config is disabled since you have a Joystick enabled.Use Single Channel Mode Selection
- Use Single Channel Mode Selection
+ Use Single Channel Mode SelectionGenerate Thresholds
- Generate Thresholds
+ Generate Thresholds
@@ -11248,21 +11248,21 @@ Is this really what you want?
%1 is set to %2. Mapping must between 0 and %3 (inclusive).
- %1 is set to %2. Mapping must between 0 and %3 (inclusive).
+ %1 is set to %2. Mapping must between 0 and %3 (inclusive).
%1 is set to same channel as %2.
- %1 is set to same channel as %2.
+ %1 is set to same channel as %2.
%1 is set to %2. Threshold must between 0.0 and 1.0 (inclusive).
- %1 is set to %2. Threshold must between 0.0 and 1.0 (inclusive).
+ %1 is set to %2. Threshold must between 0.0 and 1.0 (inclusive).
@@ -11271,7 +11271,7 @@ Is this really what you want?
Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle.
- Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle.
+ Warning: Hardware In The Loop (HITL) simulation is enabled for this vehicle.
@@ -11279,137 +11279,137 @@ Is this really what you want?
Manual
- Manual
+ ManualAcro
- Acro
+ AcroStabilized
- Stabilized
+ StabilizedRattitude
- Rattitude
+ RattitudeAltitude
- Altitude
+ AltitudePosition
- Position
+ PositionOffboard
- Offboard
+ OffboardReady
- Ready
+ ReadyTakeoff
- Takeoff
+ TakeoffHold
- Hold
+ HoldMission
- Mission
+ MissionReturn
- Return
+ ReturnLand
- Land
+ LandPrecision Land
- Precision Land
+ Precision LandReturn to Groundstation
- Return to Groundstation
+ Return to GroundstationFollow Me
- Follow Me
+ Follow MeSimple
- Simple
+ SimpleOrbit
- Orbit
+ OrbitUnknown %1:%2
- Unknown %1:%2
+ Unknown %1:%2Unable to takeoff, vehicle position not known.
- Unable to takeoff, vehicle position not known.
+ Unable to takeoff, vehicle position not known.Unable to go to location, vehicle position not known.
- Unable to go to location, vehicle position not known.
+ Unable to go to location, vehicle position not known.Unable to pause vehicle.
- Unable to pause vehicle.
+ Unable to pause vehicle.Unable to change altitude, home position unknown.
- Unable to change altitude, home position unknown.
+ Unable to change altitude, home position unknown.Unable to change altitude, home position altitude unknown.
- Unable to change altitude, home position altitude unknown.
+ Unable to change altitude, home position altitude unknown.Unable to start mission: Vehicle rejected arming.
- Unable to start mission: Vehicle rejected arming.
+ Unable to start mission: Vehicle rejected arming.Unable to start mission: Vehicle not changing to %1 flight mode.
- Unable to start mission: Vehicle not changing to %1 flight mode.
+ Unable to start mission: Vehicle not changing to %1 flight mode.QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware.
- QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware.
+ QGroundControl supports PX4 Pro firmware Version %1.%2.%3 and above. You are using a version prior to that which will lead to unpredictable results. Please upgrade your firmware.
@@ -11417,32 +11417,32 @@ Is this really what you want?
Programming new version...
- Programming new version...
+ Programming new version...Verifying program...
- Verifying program...
+ Verifying program...Verify complete
- Verify complete
+ Verify completeRebooting board
- Rebooting board
+ Rebooting boardErasing previous program...
- Erasing previous program...
+ Erasing previous program...Erase complete
- Erase complete
+ Erase complete
@@ -11450,12 +11450,12 @@ Is this really what you want?
Flight Behavior
- Flight Behavior
+ Flight BehaviorFlight Behavior is used to configure flight characteristics.
- Flight Behavior is used to configure flight characteristics.
+ Flight Behavior is used to configure flight characteristics.
@@ -11464,67 +11464,67 @@ Is this really what you want?
Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set)
- Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set)
+ Enable responsiveness slider (if enabled, acceleration limit parameters and others are automatically set)Responsiveness
- Responsiveness
+ ResponsivenessA higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances.
- A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances.
+ A higher value makes the vehicle react faster. Be aware that this affects braking as well, and a combination of slow responsiveness with high maximum velocity will lead to long braking distances.Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set)
- Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set)
+ Enable horizontal velocity slider (if enabled, individual velocity limit parameters are automatically set)Horizontal velocity (m/s)
- Horizontal velocity (m/s)
+ Horizontal velocity (m/s)Limit the horizonal velocity (applies to all modes).
- Limit the horizonal velocity (applies to all modes).
+ Limit the horizonal velocity (applies to all modes).Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set)
- Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set)
+ Enable vertical velocity slider (if enabled, individual velocity limit parameters are automatically set)Vertial velocity (m/s)
- Vertial velocity (m/s)
+ Vertial velocity (m/s)Limit the vertical velocity (applies to all modes).
- Limit the vertical velocity (applies to all modes).
+ Limit the vertical velocity (applies to all modes).Mission Turning Radius
- Mission Turning Radius
+ Mission Turning RadiusIncreasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking.
- Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking.
+ Increasing this leads to rounder turns in missions (corner cutting). Use the minimum value for accurate corner tracking.
@@ -11532,7 +11532,7 @@ Is this really what you want?
PX4Flow Camera
- PX4Flow Camera
+ PX4Flow Camera
@@ -11540,12 +11540,12 @@ Is this really what you want?
Enabled
- Enabled
+ EnabledDisabled
- Disabled
+ Disabled
@@ -11553,12 +11553,12 @@ Is this really what you want?
Radio
- Radio
+ RadioRadio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed.
- Radio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed.
+ Radio Setup is used to calibrate your transmitter. It also assign channels for Roll, Pitch, Yaw and Throttle vehicle control as well as determining whether they are reversed.
@@ -11567,7 +11567,7 @@ Is this really what you want?
Roll
- Roll
+ Roll
@@ -11579,31 +11579,31 @@ Is this really what you want?
Setup required
- Setup required
+ Setup requiredPitch
- Pitch
+ PitchYaw
- Yaw
+ YawThrottle
- Throttle
+ ThrottleFlaps
- Flaps
+ Flaps
@@ -11613,19 +11613,19 @@ Is this really what you want?
Disabled
- Disabled
+ DisabledAux1
- Aux1
+ Aux1Aux2
- Aux2
+ Aux2
@@ -11634,25 +11634,25 @@ Is this really what you want?
Flight Mode Settings
- Flight Mode Settings
+ Flight Mode SettingsMode Channel
- Mode Channel
+ Mode ChannelFlight Mode %1
- Flight Mode %1
+ Flight Mode %1Switch Settings
- Switch Settings
+ Switch Settings
@@ -11660,12 +11660,12 @@ Is this really what you want?
PID Tuning
- PID Tuning
+ PID TuningTuning Setup is used to tune the flight controllers.
- Tuning Setup is used to tune the flight controllers.
+ Tuning Setup is used to tune the flight controllers.
@@ -11674,25 +11674,25 @@ Is this really what you want?
Rate Controller
- Rate Controller
+ Rate ControllerAttitude Controller
- Attitude Controller
+ Attitude ControllerVelocity Controller
- Velocity Controller
+ Velocity ControllerPosition Controller
- Position Controller
+ Position Controller
@@ -11701,13 +11701,13 @@ Is this really what you want?
Roll
- Roll
+ RollProportional Gain (MC_ROLL_P)
- Proportional Gain (MC_ROLL_P)
+ Proportional Gain (MC_ROLL_P)
@@ -11715,37 +11715,37 @@ Is this really what you want?
Increase for more responsiveness, reduce if the attitude overshoots.
- Increase for more responsiveness, reduce if the attitude overshoots.
+ Increase for more responsiveness, reduce if the attitude overshoots.Pitch
- Pitch
+ PitchProportional Gain (MC_PITCH_P)
- Proportional Gain (MC_PITCH_P)
+ Proportional Gain (MC_PITCH_P)Yaw
- Yaw
+ YawProportional Gain (MC_YAW_P)
- Proportional Gain (MC_YAW_P)
+ Proportional Gain (MC_YAW_P)Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick).
- Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick).
+ Increase for more responsiveness, reduce if the attitude overshoots (there is only a setpoint when yaw is fixed, i.e. when centering the stick).
@@ -11754,25 +11754,25 @@ Is this really what you want?
Position control mode (set this to 'simple' during tuning):
- Position control mode (set this to 'simple' during tuning):
+ Position control mode (set this to 'simple' during tuning):Horizontal
- Horizontal
+ HorizontalHorizontal (Y direction, sidewards)
- Horizontal (Y direction, sidewards)
+ Horizontal (Y direction, sidewards)Proportional gain (MPC_XY_P)
- Proportional gain (MPC_XY_P)
+ Proportional gain (MPC_XY_P)
@@ -11780,19 +11780,19 @@ Is this really what you want?
Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick).
- Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick).
+ Increase for more responsiveness, reduce if the position overshoots (there is only a setpoint when hovering, i.e. when centering the stick).Vertical
- Vertical
+ VerticalProportional gain (MPC_Z_P)
- Proportional gain (MPC_Z_P)
+ Proportional gain (MPC_Z_P)
@@ -11801,25 +11801,25 @@ Is this really what you want?
Airmode (disable during tuning) <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#airmode-mixer-saturation">?</a></b>:
- Airmode (disable during tuning) <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#airmode-mixer-saturation">?</a></b>:
+ Airmode (disable during tuning) <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#airmode-mixer-saturation">?</a></b>:Thrust curve <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#thrust-curve">?</a></b>:
- Thrust curve <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#thrust-curve">?</a></b>:
+ Thrust curve <b><a href="https://docs.px4.io/master/en/config_mc/pid_tuning_guide_multicopter.html#thrust-curve">?</a></b>:Roll
- Roll
+ RollOverall Multiplier (MC_ROLLRATE_K)
- Overall Multiplier (MC_ROLLRATE_K)
+ Overall Multiplier (MC_ROLLRATE_K)
@@ -11829,13 +11829,13 @@ Is this really what you want?
Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help).
- Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help).
+ Multiplier for P, I and D gains: increase for more responsiveness, reduce if the rates overshoot (and increasing D does not help).Differential Gain (MC_ROLLRATE_D)
- Differential Gain (MC_ROLLRATE_D)
+ Differential Gain (MC_ROLLRATE_D)
@@ -11843,13 +11843,13 @@ Is this really what you want?
Damping: increase to reduce overshoots and oscillations, but not higher than really needed.
- Damping: increase to reduce overshoots and oscillations, but not higher than really needed.
+ Damping: increase to reduce overshoots and oscillations, but not higher than really needed.Integral Gain (MC_ROLLRATE_I)
- Integral Gain (MC_ROLLRATE_I)
+ Integral Gain (MC_ROLLRATE_I)
@@ -11859,49 +11859,49 @@ Is this really what you want?
Generally does not need much adjustment, reduce this when seeing slow oscillations.
- Generally does not need much adjustment, reduce this when seeing slow oscillations.
+ Generally does not need much adjustment, reduce this when seeing slow oscillations.Pitch
- Pitch
+ PitchOverall Multiplier (MC_PITCHRATE_K)
- Overall Multiplier (MC_PITCHRATE_K)
+ Overall Multiplier (MC_PITCHRATE_K)Differential Gain (MC_PITCHRATE_D)
- Differential Gain (MC_PITCHRATE_D)
+ Differential Gain (MC_PITCHRATE_D)Integral Gain (MC_PITCHRATE_I)
- Integral Gain (MC_PITCHRATE_I)
+ Integral Gain (MC_PITCHRATE_I)Yaw
- Yaw
+ YawOverall Multiplier (MC_YAWRATE_K)
- Overall Multiplier (MC_YAWRATE_K)
+ Overall Multiplier (MC_YAWRATE_K)Integral Gain (MC_YAWRATE_I)
- Integral Gain (MC_YAWRATE_I)
+ Integral Gain (MC_YAWRATE_I)
@@ -11910,25 +11910,25 @@ Is this really what you want?
Position control mode (set this to 'simple' during tuning):
- Position control mode (set this to 'simple' during tuning):
+ Position control mode (set this to 'simple' during tuning):Horizontal
- Horizontal
+ HorizontalHorizontal (Y direction, sidewards)
- Horizontal (Y direction, sidewards)
+ Horizontal (Y direction, sidewards)Proportional gain (MPC_XY_VEL_P_ACC)
- Proportional gain (MPC_XY_VEL_P_ACC)
+ Proportional gain (MPC_XY_VEL_P_ACC)
@@ -11936,25 +11936,25 @@ Is this really what you want?
Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help).
- Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help).
+ Increase for more responsiveness, reduce if the velocity overshoots (and increasing D does not help).Integral gain (MPC_XY_VEL_I_ACC)
- Integral gain (MPC_XY_VEL_I_ACC)
+ Integral gain (MPC_XY_VEL_I_ACC)Increase to reduce steady-state error (e.g. wind)
- Increase to reduce steady-state error (e.g. wind)
+ Increase to reduce steady-state error (e.g. wind)Differential gain (MPC_XY_VEL_D_ACC)
- Differential gain (MPC_XY_VEL_D_ACC)
+ Differential gain (MPC_XY_VEL_D_ACC)
@@ -11962,37 +11962,37 @@ Is this really what you want?
Damping: increase to reduce overshoots and oscillations, but not higher than really needed.
- Damping: increase to reduce overshoots and oscillations, but not higher than really needed.
+ Damping: increase to reduce overshoots and oscillations, but not higher than really needed.Vertical
- Vertical
+ VerticalProportional gain (MPC_Z_VEL_P_ACC)
- Proportional gain (MPC_Z_VEL_P_ACC)
+ Proportional gain (MPC_Z_VEL_P_ACC)Integral gain (MPC_Z_VEL_I_ACC)
- Integral gain (MPC_Z_VEL_I_ACC)
+ Integral gain (MPC_Z_VEL_I_ACC)Increase to reduce steady-state error
- Increase to reduce steady-state error
+ Increase to reduce steady-state errorDifferential gain (MPC_Z_VEL_D_ACC)
- Differential gain (MPC_Z_VEL_D_ACC)
+ Differential gain (MPC_Z_VEL_D_ACC)
@@ -12001,7 +12001,7 @@ Is this really what you want?
TECS
- TECS
+ TECS
@@ -12010,19 +12010,19 @@ Is this really what you want?
Altitude & Airspeed
- Altitude & Airspeed
+ Altitude & AirspeedHeight rate feed forward (FW_T_HRATE_FF)
- Height rate feed forward (FW_T_HRATE_FF)
+ Height rate feed forward (FW_T_HRATE_FF)TODO
- TODO
+ TODO
@@ -12031,7 +12031,7 @@ Is this really what you want?
Multirotor
- Multirotor
+ Multirotor
@@ -12039,60 +12039,60 @@ Is this really what you want?
Pairing Successfull
- Pairing Successfull
+ Pairing SuccessfullConnection Successfull
- Connection Successfull
+ Connection SuccessfullConnection Rejected
- Connection Rejected
+ Connection RejectedPairing Rejected
- Pairing Rejected
+ Pairing RejectedNo Response From Vehicle
- No Response From Vehicle
+ No Response From VehicleConnecting to %1
- Connecting to %1
+ Connecting to %1Invalid Pairing File
- Invalid Pairing File
+ Invalid Pairing FileError Parsing Pairing File
- Error Parsing Pairing File
+ Error Parsing Pairing FileNFC
- NFC
+ NFCMicrohard
- Microhard
+ MicrohardPairing...
- Pairing...
+ Pairing...
@@ -12100,17 +12100,17 @@ Is this really what you want?
Waiting for NFC connection
- Waiting for NFC connection
+ Waiting for NFC connectionDevice detected
- Device detected
+ Device detectedDevice removed
- Device removed
+ Device removed
@@ -12118,42 +12118,42 @@ Is this really what you want?
Load Parameters
- Load Parameters
+ Load ParametersThe following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle.
- The following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle.
+ The following parameters from the loaded file differ from what is currently set on the Vehicle. Click 'Ok' to update them on the Vehicle.There are no differences between the file loaded and the current settings on the Vehicle.
- There are no differences between the file loaded and the current settings on the Vehicle.
+ There are no differences between the file loaded and the current settings on the Vehicle.Comp ID
- Comp ID
+ Comp IDName
- Name
+ NameFile
- File
+ FileVehicle
- Vehicle
+ VehicleN/A
- N/A
+ N/A
@@ -12161,80 +12161,80 @@ Is this really what you want?
Search:
- Search:
+ Search:Clear
- Clear
+ ClearShow modified only
- Show modified only
+ Show modified onlyTools
- Tools
+ ToolsRefresh
- Refresh
+ RefreshReset all to firmware's defaults
- Reset all to firmware's defaults
+ Reset all to firmware's defaultsReset All
- Reset All
+ Reset AllReset to vehicle's configuration defaults
- Reset to vehicle's configuration defaults
+ Reset to vehicle's configuration defaultsLoad from file...
- Load from file...
+ Load from file...Load Parameters
- Load Parameters
+ Load ParametersSave to file...
- Save to file...
+ Save to file...Save Parameters
- Save Parameters
+ Save ParametersClear all RC to Param
- Clear all RC to Param
+ Clear all RC to ParamAll Files (*)
- All Files (*)
+ All Files (*)Select Reset to reset all parameters to their defaults.
Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations.
- Select Reset to reset all parameters to their defaults.
+ Select Reset to reset all parameters to their defaults.
Note that this will also completely reset everything, including UAVCAN nodes, all vehicle settings, setup and calibrations.
@@ -12242,27 +12242,27 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Reboot Vehicle
- Reboot Vehicle
+ Reboot VehicleParameter Editor
- Parameter Editor
+ Parameter EditorParameter Files (*.%1)
- Parameter Files (*.%1)
+ Parameter Files (*.%1)Select Reset to reset all parameters to the vehicle's configuration defaults.
- Select Reset to reset all parameters to the vehicle's configuration defaults.
+ Select Reset to reset all parameters to the vehicle's configuration defaults.Select Ok to reboot vehicle.
- Select Ok to reboot vehicle.
+ Select Ok to reboot vehicle.
@@ -12270,12 +12270,12 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Unable to create file: %1
- Unable to create file: %1
+ Unable to create file: %1Unable to open file: %1
- Unable to open file: %1
+ Unable to open file: %1
@@ -12283,57 +12283,57 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Reset to default
- Reset to default
+ Reset to defaultMin:
- Min:
+ Min: Max:
- Max:
+ Max: Default:
- Default:
+ Default: Parameter name:
- Parameter name:
+ Parameter name: Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss.
- Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss.
+ Warning: Modifying values while vehicle is in flight can lead to vehicle instability and possible vehicle loss. Make sure you know what you are doing and double-check your values before Save!
- Make sure you know what you are doing and double-check your values before Save!
+ Make sure you know what you are doing and double-check your values before Save!Force save (dangerous!)
- Force save (dangerous!)
+ Force save (dangerous!)Advanced settings
- Advanced settings
+ Advanced settingsManual Entry
- Manual Entry
+ Manual EntrySet RC to Param
- Set RC to Param
+ Set RC to Param
@@ -12341,39 +12341,39 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Parameter write failed: veh:%1 comp:%2 param:%3
- Parameter write failed: veh:%1 comp:%2 param:%3
+ Parameter write failed: veh:%1 comp:%2 param:%3Parameter read failed: veh:%1 comp:%2 param:%3
- Parameter read failed: veh:%1 comp:%2 param:%3
+ Parameter read failed: veh:%1 comp:%2 param:%3Parameter cache CRC match failed
- Parameter cache CRC match failed
+ Parameter cache CRC match failedParameters not loaded since they are not currently on the vehicle: %1
- Parameters not loaded since they are not currently on the vehicle: %1
+ Parameters not loaded since they are not currently on the vehicle: %1
Parameters not loaded due to type mismatch: %1
- Parameters not loaded due to type mismatch: %1
+ Parameters not loaded due to type mismatch: %1%1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue.
- %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue.
+ %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue.Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface.
- Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface.
+ Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface.
@@ -12381,137 +12381,137 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Video Grab
- Video Grab
+ Video GrabCamera Trigger
- Camera Trigger
+ Camera TriggerFree Space:
- Free Space:
+ Free Space: Battery:
- Battery:
+ Battery: Settings
- Settings
+ SettingsCamera
- Camera
+ CameraVideo Stream
- Video Stream
+ Video StreamThermal View Mode
- Thermal View Mode
+ Thermal View ModeBlend Opacity
- Blend Opacity
+ Blend OpacityPhoto Mode
- Photo Mode
+ Photo ModePhoto Interval (seconds)
- Photo Interval (seconds)
+ Photo Interval (seconds)Video Grid Lines
- Video Grid Lines
+ Video Grid LinesVideo Screen Fit
- Video Screen Fit
+ Video Screen FitReset Camera Defaults
- Reset Camera Defaults
+ Reset Camera DefaultsStorage
- Storage
+ StorageOff
- Off
+ OffBlend
- Blend
+ BlendFull
- Full
+ FullPicture In Picture
- Picture In Picture
+ Picture In PictureSingle
- Single
+ SingleTime Lapse
- Time Lapse
+ Time LapseReset
- Reset
+ ResetReset Camera to Factory Settings
- Reset Camera to Factory Settings
+ Reset Camera to Factory SettingsConfirm resetting all settings?
- Confirm resetting all settings?
+ Confirm resetting all settings?Format
- Format
+ FormatFormat Camera Storage
- Format Camera Storage
+ Format Camera StorageConfirm erasing all files?
- Confirm erasing all files?
+ Confirm erasing all files?
@@ -12519,82 +12519,82 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone
- Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNone
+ Internal error occurred during Mission Item communication: _ackTimeOut:_expectedAck == AckNoneMission request list failed, maximum retries exceeded.
- Mission request list failed, maximum retries exceeded.
+ Mission request list failed, maximum retries exceeded.Retrying %1 REQUEST_LIST retry Count
- Retrying %1 REQUEST_LIST retry Count
+ Retrying %1 REQUEST_LIST retry CountMission read failed, maximum retries exceeded.
- Mission read failed, maximum retries exceeded.
+ Mission read failed, maximum retries exceeded.Retrying %1 MISSION_REQUEST retry Count
- Retrying %1 MISSION_REQUEST retry Count
+ Retrying %1 MISSION_REQUEST retry CountMission write failed, vehicle failed to send final ack.
- Mission write failed, vehicle failed to send final ack.
+ Mission write failed, vehicle failed to send final ack.Mission write mission count failed, maximum retries exceeded.
- Mission write mission count failed, maximum retries exceeded.
+ Mission write mission count failed, maximum retries exceeded.Vehicle did not request all items from ground station: %1
- Vehicle did not request all items from ground station: %1
+ Vehicle did not request all items from ground station: %1Mission remove all, maximum retries exceeded.
- Mission remove all, maximum retries exceeded.
+ Mission remove all, maximum retries exceeded.Retrying %1 MISSION_CLEAR_ALL retry Count
- Retrying %1 MISSION_CLEAR_ALL retry Count
+ Retrying %1 MISSION_CLEAR_ALL retry CountVehicle did not respond to mission item communication: %1
- Vehicle did not respond to mission item communication: %1
+ Vehicle did not respond to mission item communication: %1Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read
- Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to read
+ Internal Error: Call to Vehicle _requestNextMissionItem with no more indices to readVehicle requested item outside range, count:request %1:%2. Send to Vehicle failed.
- Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed.
+ Vehicle requested item outside range, count:request %1:%2. Send to Vehicle failed.Vehicle remove all failed. Error: %1
- Vehicle remove all failed. Error: %1
+ Vehicle remove all failed. Error: %1Item #%1 Command: %2
- Item #%1 Command: %2
+ Item #%1 Command: %2Frame: %1
- Frame: %1
+ Frame: %1
@@ -12605,92 +12605,92 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Value: %1
- Value: %1
+ Value: %1Mission accepted.
- Mission accepted.
+ Mission accepted.Unspecified error.
- Unspecified error.
+ Unspecified error.Coordinate frame is not supported.
- Coordinate frame is not supported.
+ Coordinate frame is not supported.Command is not supported.
- Command is not supported.
+ Command is not supported.Mission item exceeds storage space.
- Mission item exceeds storage space.
+ Mission item exceeds storage space.One of the parameters has an invalid value.
- One of the parameters has an invalid value.
+ One of the parameters has an invalid value.Param 1 invalid value.
- Param 1 invalid value.
+ Param 1 invalid value.Param 2 invalid value.
- Param 2 invalid value.
+ Param 2 invalid value.Param 3 invalid value.
- Param 3 invalid value.
+ Param 3 invalid value.Param 4 invalid value.
- Param 4 invalid value.
+ Param 4 invalid value.Param 5 invalid value.
- Param 5 invalid value.
+ Param 5 invalid value.Param 6 invalid value.
- Param 6 invalid value.
+ Param 6 invalid value.Param 7 invalid value.
- Param 7 invalid value.
+ Param 7 invalid value.Received mission item out of sequence.
- Received mission item out of sequence.
+ Received mission item out of sequence.Not accepting any mission commands.
- Not accepting any mission commands.
+ Not accepting any mission commands.Unknown error: %1.
- Unknown error: %1.
+ Unknown error: %1.Vehicle returned error: %1. %2Vehicle did not accept guided item.
- Vehicle returned error: %1. %2Vehicle did not accept guided item.
+ Vehicle returned error: %1. %2Vehicle did not accept guided item.
@@ -12698,43 +12698,43 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Download not supported on high latency links.
- Download not supported on high latency links.
+ Download not supported on high latency links.Upload not supported on high latency links.
- Upload not supported on high latency links.
+ Upload not supported on high latency links.Error loading Plan file (%1). %2
- Error loading Plan file (%1). %2
+ Error loading Plan file (%1). %2Plan save error %1 : %2
- Plan save error %1 : %2
+ Plan save error %1 : %2KML save error %1 : %2
- KML save error %1 : %2
+ KML save error %1 : %2Supported types (*.%1 *.%2 *.%3 *.%4)
- Supported types (*.%1 *.%2 *.%3 *.%4)
+ Supported types (*.%1 *.%2 *.%3 *.%4)All Files (*)
- All Files (*)
+ All Files (*)Plan Files (*.%1)
- Plan Files (*.%1)
+ Plan Files (*.%1)
@@ -12742,78 +12742,78 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Selected Waypoint
- Selected Waypoint
+ Selected WaypointAlt diff:
- Alt diff:
+ Alt diff:Azimuth:
- Azimuth:
+ Azimuth:Distance:
- Distance:
+ Distance:Gradient:
- Gradient:
+ Gradient:Heading:
- Heading:
+ Heading:Total Mission
- Total Mission
+ Total MissionMax telem dist:
- Max telem dist:
+ Max telem dist:Time:
- Time:
+ Time:Battery
- Battery
+ BatteryBatteries required:
- Batteries required:
+ Batteries required:Upload Required
- Upload Required
+ Upload RequiredUpload
- Upload
+ UploadSyncing Mission
- Syncing Mission
+ Syncing MissionClick anywhere to hide
- Click anywhere to hide
+ Click anywhere to hide
@@ -12821,313 +12821,313 @@ Note that this will also completely reset everything, including UAVCAN nodes, al
Vehicle is currently armed. Do you want to upload the mission to the vehicle?
- Vehicle is currently armed. Do you want to upload the mission to the vehicle?
+ Vehicle is currently armed. Do you want to upload the mission to the vehicle?You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission?
- You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission?
+ You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission?You need at least one item to create a KML.
- You need at least one item to create a KML.
+ You need at least one item to create a KML.Plan is waiting on terrain data from server for correct altitude values.
- Plan is waiting on terrain data from server for correct altitude values.
+ Plan is waiting on terrain data from server for correct altitude values.Plan Upload
- Plan Upload
+ Plan UploadSelect Plan File
- Select Plan File
+ Select Plan FileSave Plan
- Save Plan
+ Save PlanSave KML
- Save KML
+ Save KMLMove the selected mission item to the be after following mission item:
- Move the selected mission item to the be after following mission item:
+ Move the selected mission item to the be after following mission item:File
- File
+ FileWaypoint
- Waypoint
+ WaypointROI
- ROI
+ ROIPattern
- Pattern
+ PatternCenter
- Center
+ CenterPlan
- Plan
+ PlanApply new altitude
- Apply new altitude
+ Apply new altitudePlan View - Vehicle Disconnected
- Plan View - Vehicle Disconnected
+ Plan View - Vehicle DisconnectedPlan View - Vehicle Changed
- Plan View - Vehicle Changed
+ Plan View - Vehicle ChangedThe vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan?
- The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan?
+ The vehicle associated with the plan in the Plan View is no longer available. What would you like to do with that plan?The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan?
- The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan?
+ The plan being worked on in the Plan View is not from the current vehicle. What would you like to do with that plan?Discard Unsaved Changes
- Discard Unsaved Changes
+ Discard Unsaved ChangesDiscard Unsaved Changes, Load New Plan From Vehicle
- Discard Unsaved Changes, Load New Plan From Vehicle
+ Discard Unsaved Changes, Load New Plan From VehicleLoad New Plan From Vehicle
- Load New Plan From Vehicle
+ Load New Plan From VehicleKeep Current Plan
- Keep Current Plan
+ Keep Current PlanKeep Current Plan, Don't Update From Vehicle
- Keep Current Plan, Don't Update From Vehicle
+ Keep Current Plan, Don't Update From VehicleThis Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type.
Click 'Ok' to upload the Plan anyway.
- This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type.
+ This Plan was created for a different firmware or vehicle type than the firmware/vehicle type of vehicle you are uploading to. This can lead to errors or incorrect behavior. It is recommended to recreate the Plan for the correct firmware/vehicle type.
Click 'Ok' to upload the Plan anyway.Send To Vehicle
- Send To Vehicle
+ Send To VehicleCurrent mission must be paused prior to uploading a new Plan
- Current mission must be paused prior to uploading a new Plan
+ Current mission must be paused prior to uploading a new PlanFly
- Fly
+ FlyTakeoff
- Takeoff
+ TakeoffRally Point
- Rally Point
+ Rally PointCancel ROI
- Cancel ROI
+ Cancel ROIReturn
- Return
+ ReturnLand
- Land
+ LandMission
- Mission
+ MissionFence
- Fence
+ FenceRally
- Rally
+ RallyYou have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle?
- You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle?
+ You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle?You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file?
- You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file?
+ You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file?Clear
- Clear
+ ClearAre you sure you want to remove all mission items and clear the mission from the vehicle?
- Are you sure you want to remove all mission items and clear the mission from the vehicle?
+ Are you sure you want to remove all mission items and clear the mission from the vehicle?Create complex pattern:
- Create complex pattern:
+ Create complex pattern:Mission overwrite
- Mission overwrite
+ Mission overwriteGeoFence overwrite
- GeoFence overwrite
+ GeoFence overwriteRally Points overwrite
- Rally Points overwrite
+ Rally Points overwriteYou have unsaved changes.
- You have unsaved changes.
+ You have unsaved changes.Open...
- Open...
+ Open...Save
- Save
+ SaveUnable to %1
- Unable to %1
+ Unable to %1Plan has incomplete items. Complete all items and %1 again.
- Plan has incomplete items. Complete all items and %1 again.
+ Plan has incomplete items. Complete all items and %1 again.Are you sure you want to remove current plan and create a new plan?
- Are you sure you want to remove current plan and create a new plan?
+ Are you sure you want to remove current plan and create a new plan? You have unsaved changes. You should upload to your vehicle, or save to a file.
- You have unsaved changes. You should upload to your vehicle, or save to a file.
+ You have unsaved changes. You should upload to your vehicle, or save to a file.Create Plan
- Create Plan
+ Create PlanStorage
- Storage
+ StorageSave As...
- Save As...
+ Save As...Save Mission Waypoints As KML...
- Save Mission Waypoints As KML...
+ Save Mission Waypoints As KML...KML
- KML
+ KMLUpload
- Upload
+ UploadVehicle
- Vehicle
+ VehicleDownload
- Download
+ Download
@@ -13135,27 +13135,27 @@ Click 'Ok' to upload the Plan anyway.
Click to add point %1
- Click to add point %1
+ Click to add point %1- Right Click to end polygon
- - Right Click to end polygon
+ - Right Click to end polygonClick to add point
- Click to add point
+ Click to add pointClick to add point - Right Click to end polygon
- Click to add point - Right Click to end polygon
+ Click to add point - Right Click to end polygonAdjust polygon by dragging corners
- Adjust polygon by dragging corners
+ Adjust polygon by dragging corners
@@ -13168,67 +13168,67 @@ Click 'Ok' to upload the Plan anyway.
ESC Calibration
- ESC Calibration
+ ESC Calibration%1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware.
- %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware.
+ %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade to a newer firmware.%1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1.
- %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1.
+ %1 cannot perform ESC Calibration with this version of firmware. You will need to upgrade %1.Performing calibration. This will take a few seconds..
- Performing calibration. This will take a few seconds..
+ Performing calibration. This will take a few seconds..ESC Calibration failed
- ESC Calibration failed
+ ESC Calibration failedESC Calibration failed.
- ESC Calibration failed.
+ ESC Calibration failed. Calibration complete. You can disconnect your battery now if you like.
- Calibration complete. You can disconnect your battery now if you like.
+ Calibration complete. You can disconnect your battery now if you like.WARNING: Props must be removed from vehicle prior to performing ESC calibration.
- WARNING: Props must be removed from vehicle prior to performing ESC calibration.
+ WARNING: Props must be removed from vehicle prior to performing ESC calibration. Connect the battery now and calibration will begin.
- Connect the battery now and calibration will begin.
+ Connect the battery now and calibration will begin.You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again.
- You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again.
+ You must disconnect the battery prior to performing ESC Calibration. Disconnect your battery and try again.Battery
- Battery
+ Battery
@@ -13236,55 +13236,55 @@ Click 'Ok' to upload the Plan anyway.
Source
- Source
+ SourceMeasure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier.
- Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier.
+ Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier.Measured voltage:
- Measured voltage:
+ Measured voltage:Vehicle voltage:
- Vehicle voltage:
+ Vehicle voltage:Voltage divider:
- Voltage divider:
+ Voltage divider:Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.
- Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.
+ Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.Measured current:
- Measured current:
+ Measured current:Vehicle current:
- Vehicle current:
+ Vehicle current:Amps per volt:
- Amps per volt:
+ Amps per volt:
@@ -13296,55 +13296,55 @@ Click 'Ok' to upload the Plan anyway.
Calculate
- Calculate
+ CalculateNumber of Cells (in Series)
- Number of Cells (in Series)
+ Number of Cells (in Series)Full Voltage (per cell)
- Full Voltage (per cell)
+ Full Voltage (per cell)Battery Max:
- Battery Max:
+ Battery Max:Empty Voltage (per cell)
- Empty Voltage (per cell)
+ Empty Voltage (per cell)Battery Min:
- Battery Min:
+ Battery Min:Voltage divider
- Voltage divider
+ Voltage dividerCalculate Voltage Divider
- Calculate Voltage Divider
+ Calculate Voltage DividerIf the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this.
- If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this.
+ If the battery voltage reported by the vehicle is largely different than the voltage read externally using a voltmeter you can adjust the voltage multiplier value to correct this.
@@ -13352,155 +13352,155 @@ Click 'Ok' to upload the Plan anyway.
Click the Calculate button for help with calculating a new value.
- Click the Calculate button for help with calculating a new value.
+ Click the Calculate button for help with calculating a new value.Amps per volt
- Amps per volt
+ Amps per voltCalculate Amps per Volt
- Calculate Amps per Volt
+ Calculate Amps per VoltIf the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this.
- If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this.
+ If the current draw reported by the vehicle is largely different than the current read externally using a current meter you can adjust the amps per volt value to correct this. ESC PWM Minimum and Maximum Calibration
- ESC PWM Minimum and Maximum Calibration
+ ESC PWM Minimum and Maximum CalibrationWARNING: Propellers must be removed from vehicle prior to performing ESC calibration.
- WARNING: Propellers must be removed from vehicle prior to performing ESC calibration.
+ WARNING: Propellers must be removed from vehicle prior to performing ESC calibration.You must use USB connection for this operation.
- You must use USB connection for this operation.
+ You must use USB connection for this operation.Calibrate
- Calibrate
+ CalibrateShow UAVCAN Settings
- Show UAVCAN Settings
+ Show UAVCAN SettingsUAVCAN Bus Configuration
- UAVCAN Bus Configuration
+ UAVCAN Bus ConfigurationChange required restart
- Change required restart
+ Change required restartUAVCAN Motor Index and Direction Assignment
- UAVCAN Motor Index and Direction Assignment
+ UAVCAN Motor Index and Direction AssignmentWARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration.
- WARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration.
+ WARNING: Propellers must be removed from vehicle prior to performing UAVCAN ESC configuration.ESC parameters will only be accessible in the editor after assignment.
- ESC parameters will only be accessible in the editor after assignment.
+ ESC parameters will only be accessible in the editor after assignment.Start the process, then turn each motor into its turn direction, in the order of their motor indices.
- Start the process, then turn each motor into its turn direction, in the order of their motor indices.
+ Start the process, then turn each motor into its turn direction, in the order of their motor indices.Start Assignment
- Start Assignment
+ Start AssignmentStop Assignment
- Stop Assignment
+ Stop AssignmentShow Advanced Settings
- Show Advanced Settings
+ Show Advanced SettingsVoltage Drop on Full Load (per cell)
- Voltage Drop on Full Load (per cell)
+ Voltage Drop on Full Load (per cell)Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full
- Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full
+ Batteries show less voltage at high throttle. Enter the difference in Volts between idle throttle and full throttle, divided by the number of battery cells. Leave at the default if unsure.
- throttle, divided by the number of battery cells. Leave at the default if unsure.
+ throttle, divided by the number of battery cells. Leave at the default if unsure. If this value is set too high, the battery might be deep discharged and damaged.
- If this value is set too high, the battery might be deep discharged and damaged.
+ If this value is set too high, the battery might be deep discharged and damaged.Compensated Minimum Voltage:
- Compensated Minimum Voltage:
+ Compensated Minimum Voltage: V
- V
+ VPower
- Power
+ PowerPower Setup is used to setup battery parameters as well as advanced settings for propellers.
- Power Setup is used to setup battery parameters as well as advanced settings for propellers.
+ Power Setup is used to setup battery parameters as well as advanced settings for propellers.
@@ -13509,19 +13509,19 @@ Click 'Ok' to upload the Plan anyway.
Battery Full
- Battery Full
+ Battery FullBattery Empty
- Battery Empty
+ Battery EmptyNumber of Cells
- Number of Cells
+ Number of Cells
@@ -13529,22 +13529,22 @@ Click 'Ok' to upload the Plan anyway.
Battery
- Battery
+ BatteryBattery connector firmly plugged?
- Battery connector firmly plugged?
+ Battery connector firmly plugged?Warning - Battery charge below %1%.
- Warning - Battery charge below %1%.
+ Warning - Battery charge below %1%.Battery charge below %1%. Please recharge.
- Battery charge below %1%. Please recharge.
+ Battery charge below %1%. Please recharge.
@@ -13552,7 +13552,7 @@ Click 'Ok' to upload the Plan anyway.
Passed
- Passed
+ Passed
@@ -13560,7 +13560,7 @@ Click 'Ok' to upload the Plan anyway.
(passed)
- (passed)
+ (passed)
@@ -13568,27 +13568,27 @@ Click 'Ok' to upload the Plan anyway.
Pre-Flight Checklist %1
- Pre-Flight Checklist %1
+ Pre-Flight Checklist %1(passed)
- (passed)
+ (passed)Reset the checklist (e.g. after a vehicle reboot)
- Reset the checklist (e.g. after a vehicle reboot)
+ Reset the checklist (e.g. after a vehicle reboot)(Passed)
- (Passed)
+ (Passed)In Progress
- In Progress
+ In Progress
@@ -13596,7 +13596,7 @@ Click 'Ok' to upload the Plan anyway.
Checklist
- Checklist
+ Checklist
@@ -13604,22 +13604,22 @@ Click 'Ok' to upload the Plan anyway.
GPS
- GPS
+ GPSWaiting for 3D lock.
- Waiting for 3D lock.
+ Waiting for 3D lock.Warning - Sat count below %1.
- Warning - Sat count below %1.
+ Warning - Sat count below %1.Waiting for sat count above %1.
- Waiting for sat count above %1.
+ Waiting for sat count above %1.
@@ -13627,17 +13627,17 @@ Click 'Ok' to upload the Plan anyway.
Radio Control
- Radio Control
+ Radio ControlReceiving signal. Perform range test & confirm.
- Receiving signal. Perform range test & confirm.
+ Receiving signal. Perform range test & confirm.No signal or invalid autopilot-RC config. Check RC and console.
- No signal or invalid autopilot-RC config. Check RC and console.
+ No signal or invalid autopilot-RC config. Check RC and console.
@@ -13645,42 +13645,42 @@ Click 'Ok' to upload the Plan anyway.
Sensors
- Sensors
+ SensorsFailure. Magnetometer issues. Check console.
- Failure. Magnetometer issues. Check console.
+ Failure. Magnetometer issues. Check console.Failure. Accelerometer issues. Check console.
- Failure. Accelerometer issues. Check console.
+ Failure. Accelerometer issues. Check console.Failure. Gyroscope issues. Check console.
- Failure. Gyroscope issues. Check console.
+ Failure. Gyroscope issues. Check console.Failure. Barometer issues. Check console.
- Failure. Barometer issues. Check console.
+ Failure. Barometer issues. Check console.Failure. Airspeed sensor issues. Check console.
- Failure. Airspeed sensor issues. Check console.
+ Failure. Airspeed sensor issues. Check console.Failure. AHRS issues. Check console.
- Failure. AHRS issues. Check console.
+ Failure. AHRS issues. Check console.Failure. GPS issues. Check console.
- Failure. GPS issues. Check console.
+ Failure. GPS issues. Check console.
@@ -13688,17 +13688,17 @@ Click 'Ok' to upload the Plan anyway.
Sound output
- Sound output
+ Sound outputQGC audio output enabled. System audio output enabled, too?
- QGC audio output enabled. System audio output enabled, too?
+ QGC audio output enabled. System audio output enabled, too?QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings!
- QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings!
+ QGC audio output is disabled. Please enable it under application settings->general to hear audio warnings!
@@ -13706,7 +13706,7 @@ Click 'Ok' to upload the Plan anyway.
--.--
- --.--
+ --.--
@@ -13714,52 +13714,52 @@ Click 'Ok' to upload the Plan anyway.
You are running %1 as root. You should not do this since it will cause other issues with %1.%1 will now exit.<br/><br/>If you are having serial port issues on Ubuntu, execute the following commands to fix most issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>
- You are running %1 as root. You should not do this since it will cause other issues with %1.%1 will now exit.<br/><br/>If you are having serial port issues on Ubuntu, execute the following commands to fix most issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>
+ You are running %1 as root. You should not do this since it will cause other issues with %1.%1 will now exit.<br/><br/>If you are having serial port issues on Ubuntu, execute the following commands to fix most issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>
- The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>
+ The current user does not have the correct permissions to access serial devices. You should also remove modemmanager since it also interferes.<br/><br/>If you are using Ubuntu, execute the following commands to fix these issues:<br/><pre>sudo usermod -a -G dialout $USER<br/>sudo apt-get remove modemmanager</pre>The format for %1 saved settings has been modified. Your saved settings have been reset to defaults.
- The format for %1 saved settings has been modified. Your saved settings have been reset to defaults.
+ The format for %1 saved settings has been modified. Your saved settings have been reset to defaults.The Offline Map Cache database has been upgraded. Your old map cache sets have been reset.
- The Offline Map Cache database has been upgraded. Your old map cache sets have been reset.
+ The Offline Map Cache database has been upgraded. Your old map cache sets have been reset.Unable to save telemetry log. Error copying telemetry to '%1': '%2'.
- Unable to save telemetry log. Error copying telemetry to '%1': '%2'.
+ Unable to save telemetry log. Error copying telemetry to '%1': '%2'.Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1
- Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1
+ Parameters are missing from firmware. You may be running a version of firmware which is not fully supported or your firmware has a bug in it. Missing params: %1There is a newer version of %1 available. You can download it from %2.
- There is a newer version of %1 available. You can download it from %2.
+ There is a newer version of %1 available. You can download it from %2.New Version Available
- New Version Available
+ New Version AvailableUnable to save telemetry log. Application save directory is not set.
- Unable to save telemetry log. Application save directory is not set.
+ Unable to save telemetry log. Application save directory is not set.Unable to save telemetry log. Telemetry save directory "%1" does not exist.
- Unable to save telemetry log. Telemetry save directory "%1" does not exist.
+ Unable to save telemetry log. Telemetry save directory "%1" does not exist.
@@ -13768,7 +13768,7 @@ Click 'Ok' to upload the Plan anyway.
%1 x:%2 y:%3 width:%4 height:%5 visible:%6 enabled:%7 z:%8 parent:%9 implicitWidth/Height:%10:%11Do not translate
- %1 x:%2 y:%3 width:%4 height:%5 visible:%6 enabled:%7 z:%8 parent:%9 implicitWidth/Height:%10:%11
+ %1 x:%2 y:%3 width:%4 height:%5 visible:%6 enabled:%7 z:%8 parent:%9 implicitWidth/Height:%10:%11
@@ -13776,92 +13776,92 @@ Click 'Ok' to upload the Plan anyway.
General
- General
+ GeneralComm Links
- Comm Links
+ Comm LinksOffline Maps
- Offline Maps
+ Offline MapsTaisync
- Taisync
+ TaisyncMicrohard
- Microhard
+ MicrohardAirMap
- AirMap
+ AirMapMAVLink
- MAVLink
+ MAVLinkConsole
- Console
+ ConsoleHelp
- Help
+ HelpMock Link
- Mock Link
+ Mock LinkDebug
- Debug
+ DebugPalette Test
- Palette Test
+ Palette TestVibration
- Vibration
+ VibrationLog Download
- Log Download
+ Log DownloadGeoTag Images
- GeoTag Images
+ GeoTag ImagesMAVLink Console
- MAVLink Console
+ MAVLink ConsoleMAVLink Inspector
- MAVLink Inspector
+ MAVLink InspectorWARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode?
- WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode?
+ WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode?
@@ -13869,7 +13869,7 @@ Click 'Ok' to upload the Plan anyway.
GeoFence Circle only supports version %1
- GeoFence Circle only supports version %1
+ GeoFence Circle only supports version %1
@@ -13877,7 +13877,7 @@ Click 'Ok' to upload the Plan anyway.
GeoFence Polygon only supports version %1
- GeoFence Polygon only supports version %1
+ GeoFence Polygon only supports version %1
@@ -13885,38 +13885,38 @@ Click 'Ok' to upload the Plan anyway.
Path: %1
- Path: %1
+ Path: %1Delete
- Delete
+ DeleteNo files
- No files
+ No filesNew file name:
- New file name:
+ New file name:File names must end with .%1 file extension. If missing it will be added.
- File names must end with .%1 file extension. If missing it will be added.
+ File names must end with .%1 file extension. If missing it will be added.The file %1 exists. Click Save again to replace it.
- The file %1 exists. Click Save again to replace it.
+ The file %1 exists. Click Save again to replace it.Save to existing file:
- Save to existing file:
+ Save to existing file:
@@ -13924,27 +13924,27 @@ Click 'Ok' to upload the Plan anyway.
Unabled to find writable download location. Tried downloads and temp directory.
- Unabled to find writable download location. Tried downloads and temp directory.
+ Unabled to find writable download location. Tried downloads and temp directory.Could not save downloaded file to %1. Error: %2
- Could not save downloaded file to %1. Error: %2
+ Could not save downloaded file to %1. Error: %2Download cancelled
- Download cancelled
+ Download cancelledError: File Not Found
- Error: File Not Found
+ Error: File Not FoundError during download. Error: %1
- Error during download. Error: %1
+ Error during download. Error: %1
@@ -13952,7 +13952,7 @@ Click 'Ok' to upload the Plan anyway.
Pending
- Pending
+ Pending
@@ -13960,12 +13960,12 @@ Click 'Ok' to upload the Plan anyway.
Comp All
- Comp All
+ Comp AllComp %1
- Comp %1
+ Comp %1
@@ -13973,68 +13973,68 @@ Click 'Ok' to upload the Plan anyway.
Select Polygon File
- Select Polygon File
+ Select Polygon FileRemove vertex
- Remove vertex
+ Remove vertexPolygon Tools
- Polygon Tools
+ Polygon ToolsClick in the map to add vertices. Click 'Done Tracing' when finished.
- Click in the map to add vertices. Click 'Done Tracing' when finished.
+ Click in the map to add vertices. Click 'Done Tracing' when finished.Set radius...
- Set radius...
+ Set radius...Edit position...
- Edit position...
+ Edit position...Edit Center Position
- Edit Center Position
+ Edit Center PositionEdit Vertex Position
- Edit Vertex Position
+ Edit Vertex PositionBasic
- Basic
+ BasicCircular
- Circular
+ CircularDone Tracing
- Done Tracing
+ Done TracingTrace
- Trace
+ TraceLoad KML/SHP...
- Load KML/SHP...
+ Load KML/SHP...
@@ -14042,52 +14042,52 @@ Click 'Ok' to upload the Plan anyway.
Polyline Tools
- Polyline Tools
+ Polyline ToolsClick in the map to add vertices. Click 'Done Tracing' when finished.
- Click in the map to add vertices. Click 'Done Tracing' when finished.
+ Click in the map to add vertices. Click 'Done Tracing' when finished.Select KML File
- Select KML File
+ Select KML FileRemove vertex
- Remove vertex
+ Remove vertexEdit position...
- Edit position...
+ Edit position...Edit Position
- Edit Position
+ Edit PositionBasic
- Basic
+ BasicDone Tracing
- Done Tracing
+ Done TracingTrace
- Trace
+ TraceLoad KML...
- Load KML...
+ Load KML...
@@ -14095,7 +14095,7 @@ Click 'Ok' to upload the Plan anyway.
Options
- Options
+ Options
@@ -14103,17 +14103,17 @@ Click 'Ok' to upload the Plan anyway.
Form
- Form
+ FormLoaded Plugins
- Loaded Plugins
+ Loaded PluginsPlugin Log
- Plugin Log
+ Plugin Log
@@ -14121,83 +14121,83 @@ Click 'Ok' to upload the Plan anyway.
Ok
- Ok
+ OkOpen
- Open
+ OpenSave
- Save
+ SaveApply
- Apply
+ ApplySave All
- Save All
+ Save AllYes
- Yes
+ YesYes to All
- Yes to All
+ Yes to AllRetry
- Retry
+ RetryReset
- Reset
+ ResetRestore to Defaults
- Restore to Defaults
+ Restore to DefaultsIgnore
- Ignore
+ IgnoreCancel
- Cancel
+ CancelClose
- Close
+ CloseNo
- No
+ NoNo to All
- No to All
+ No to AllAbort
- Abort
+ Abort
@@ -14205,7 +14205,7 @@ Click 'Ok' to upload the Plan anyway.
?
- ?
+ ?
@@ -14213,83 +14213,83 @@ Click 'Ok' to upload the Plan anyway.
Ok
- Ok
+ OkOpen
- Open
+ OpenSave
- Save
+ SaveApply
- Apply
+ ApplySave All
- Save All
+ Save AllYes
- Yes
+ YesYes to All
- Yes to All
+ Yes to AllRetry
- Retry
+ RetryReset
- Reset
+ ResetRestore to Defaults
- Restore to Defaults
+ Restore to DefaultsIgnore
- Ignore
+ IgnoreCancel
- Cancel
+ CancelClose
- Close
+ CloseNo
- No
+ NoNo to All
- No to All
+ No to AllAbort
- Abort
+ Abort
@@ -14297,52 +14297,52 @@ Click 'Ok' to upload the Plan anyway.
32 bit
- 32 bit
+ 32 bit64 bit
- 64 bit
+ 64 bit(AMSL)
- (AMSL)
+ (AMSL)(CalcT)
- (CalcT)
+ (CalcT)AMSL
- AMSL
+ AMSLCalc Above Terrain
- Calc Above Terrain
+ Calc Above TerrainMixed Modes
- Mixed Modes
+ Mixed Modes(TerrF)
- (TerrF)
+ (TerrF)Relative To Launch
- Relative To Launch
+ Relative To LaunchTerrain Frame
- Terrain Frame
+ Terrain Frame
@@ -14350,17 +14350,17 @@ Click 'Ok' to upload the Plan anyway.
Form
- Form
+ FormMap
- Map
+ MapVehicle
- Vehicle
+ Vehicle
@@ -14368,103 +14368,103 @@ Click 'Ok' to upload the Plan anyway.
Unknown
- Unknown
+ UnknownPixhawk
- Pixhawk
+ PixhawkSiK Radio
- SiK Radio
+ SiK RadioPX4 Flow
- PX4 Flow
+ PX4 FlowOpenPilot
- OpenPilot
+ OpenPilotRTK GPS
- RTK GPS
+ RTK GPSGuided mode not supported by Vehicle.
- Guided mode not supported by Vehicle.
+ Guided mode not supported by Vehicle.Follow Me
- Follow Me
+ Follow MeThe following required keys are missing: %1
- The following required keys are missing: %1
+ The following required keys are missing: %1value for coordinate is not array
- value for coordinate is not array
+ value for coordinate is not arrayCoordinate array must contain %1 values
- Coordinate array must contain %1 values
+ Coordinate array must contain %1 valuesCoordinate array may only contain double values, found: %1
- Coordinate array may only contain double values, found: %1
+ Coordinate array may only contain double values, found: %1Incorrect value type - key:type:expected %1:%2:%3
- Incorrect value type - key:type:expected %1:%2:%3
+ Incorrect value type - key:type:expected %1:%2:%3Incorrect file type key expected:%1 actual:%2
- Incorrect file type key expected:%1 actual:%2
+ Incorrect file type key expected:%1 actual:%2File version %1 is no longer supported
- File version %1 is no longer supported
+ File version %1 is no longer supportedFile version %1 is newer than current supported version %2
- File version %1 is newer than current supported version %2
+ File version %1 is newer than current supported version %2value for coordinate array is not array
- value for coordinate array is not array
+ value for coordinate array is not arrayUnknown type: %1
- Unknown type: %1
+ Unknown type: %1Error
- Error
+ ErrorA second instance of %1 is already running. Please close the other instance and try again.
- A second instance of %1 is already running. Please close the other instance and try again.
+ A second instance of %1 is already running. Please close the other instance and try again.
@@ -14472,51 +14472,51 @@ Click 'Ok' to upload the Plan anyway.
Window Color
- Window Color
+ Window ColorImport/Export
- Import/Export
+ Import/ExportLight
- Light
+ LightDark
- Dark
+ DarkEnabled
- Enabled
+ EnabledValue
- Value
+ ValueDisabled
- Disabled
+ DisabledQGC name
- QGC name
+ QGC nameLabel
- Label
+ Label
@@ -14526,52 +14526,52 @@ Click 'Ok' to upload the Plan anyway.
Button
- Button
+ ButtonHover Button
- Hover Button
+ Hover ButtonItem 1
- Item 1
+ Item 1Item 2
- Item 2
+ Item 2Item 3
- Item 3
+ Item 3Radio
- Radio
+ RadioCheck Box
- Check Box
+ Check BoxSUB MENU
- SUB MENU
+ SUB MENU
@@ -14579,23 +14579,23 @@ Click 'Ok' to upload the Plan anyway.
RC RSSI Status
- RC RSSI Status
+ RC RSSI StatusRC RSSI Data Unavailable
- RC RSSI Data Unavailable
+ RC RSSI Data UnavailableN/ANo data available
- N/A
+ N/ARSSI:
- RSSI:
+ RSSI:
@@ -14603,52 +14603,52 @@ Click 'Ok' to upload the Plan anyway.
RC To Param
- RC To Param
+ RC To ParamBind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page.
- Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page.
+ Bind an RC Channel to a parameter value. Tuning IDs can be mapped to an RC Channel from Radio Setup page.Waiting on parameter update from Vehicle.
- Waiting on parameter update from Vehicle.
+ Waiting on parameter update from Vehicle.Parameter
- Parameter
+ ParameterTuning ID
- Tuning ID
+ Tuning IDScale
- Scale
+ ScaleCenter Value
- Center Value
+ Center ValueMin Value
- Min Value
+ Min ValueMax Value
- Max Value
+ Max ValueDouble check that all values are correct prior to confirming dialog.
- Double check that all values are correct prior to confirming dialog.
+ Double check that all values are correct prior to confirming dialog.
@@ -14656,12 +14656,12 @@ Click 'Ok' to upload the Plan anyway.
ROI Disabled
- ROI Disabled
+ ROI DisabledDisable ROI
- Disable ROI
+ Disable ROI
@@ -14669,147 +14669,147 @@ Click 'Ok' to upload the Plan anyway.
Radio
- Radio
+ RadioReboot required
- Reboot required
+ Reboot requiredYour stick mappings have changed, you must reboot the vehicle for correct operation.
- Your stick mappings have changed, you must reboot the vehicle for correct operation.
+ Your stick mappings have changed, you must reboot the vehicle for correct operation.Throttle channel reversed
- Throttle channel reversed
+ Throttle channel reversedCalibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration.
- Calibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration.
+ Calibration failed. The throttle channel on your transmitter is reversed. You must correct this on your transmitter in order to complete calibration.Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero.
- Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero.
+ Center your sticks and move throttle all the way down, then press Ok to copy trims. After pressing Ok, reset the trims on your radio back to zero.Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration.
%1
- Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration.
+ Before calibrating you should zero all your trims and subtrims. Click Ok to start Calibration.
%1Please ensure all motor power is disconnected AND all props are removed from the vehicle.
- Please ensure all motor power is disconnected AND all props are removed from the vehicle.
+ Please ensure all motor power is disconnected AND all props are removed from the vehicle.Please turn on transmitter.
- Please turn on transmitter.
+ Please turn on transmitter.%1 channels or more are needed to fly.
- %1 channels or more are needed to fly.
+ %1 channels or more are needed to fly.Click Ok to place your Spektrum receiver in the bind mode. Select the specific receiver type below:
- Click Ok to place your Spektrum receiver in the bind mode. Select the specific receiver type below:
+ Click Ok to place your Spektrum receiver in the bind mode. Select the specific receiver type below:DSM2 Mode
- DSM2 Mode
+ DSM2 ModeDSMX (7 channels or less)
- DSMX (7 channels or less)
+ DSMX (7 channels or less)DSMX (8 channels or more)
- DSMX (8 channels or more)
+ DSMX (8 channels or more)Not Mapped
- Not Mapped
+ Not MappedAttitude Controls
- Attitude Controls
+ Attitude ControlsRoll
- Roll
+ RollPitch
- Pitch
+ PitchYaw
- Yaw
+ YawThrottle
- Throttle
+ ThrottleSkip
- Skip
+ SkipCancel
- Cancel
+ CancelCalibrate
- Calibrate
+ CalibrateAdditional Radio setup:
- Additional Radio setup:
+ Additional Radio setup:Spektrum Bind
- Spektrum Bind
+ Spektrum BindCopy Trims
- Copy Trims
+ Copy TrimsMode 1
- Mode 1
+ Mode 1Mode 2
- Mode 2
+ Mode 2
@@ -14821,7 +14821,7 @@ Click 'Ok' to upload the Plan anyway.
It is recommended to disconnect all motors for additional safety, however, the system is designed to not arm during the calibration.
Click Next to continue
- Lower the Throttle stick all the way down as shown in diagram.
+ Lower the Throttle stick all the way down as shown in diagram.
It is recommended to disconnect all motors for additional safety, however, the system is designed to not arm during the calibration.
@@ -14835,7 +14835,7 @@ Reset all transmitter trims to center.
Please ensure all motor power is disconnected AND all props are removed from the vehicle.
Click Next to continue
- Lower the Throttle stick all the way down as shown in diagram.
+ Lower the Throttle stick all the way down as shown in diagram.
Reset all transmitter trims to center.
Please ensure all motor power is disconnected AND all props are removed from the vehicle.
@@ -14845,57 +14845,57 @@ Click Next to continueMove the Throttle stick all the way up and hold it there...
- Move the Throttle stick all the way up and hold it there...
+ Move the Throttle stick all the way up and hold it there...Move the Throttle stick all the way down and leave it there...
- Move the Throttle stick all the way down and leave it there...
+ Move the Throttle stick all the way down and leave it there...Move the Yaw stick all the way to the left and hold it there...
- Move the Yaw stick all the way to the left and hold it there...
+ Move the Yaw stick all the way to the left and hold it there...Move the Yaw stick all the way to the right and hold it there...
- Move the Yaw stick all the way to the right and hold it there...
+ Move the Yaw stick all the way to the right and hold it there...Move the Roll stick all the way to the left and hold it there...
- Move the Roll stick all the way to the left and hold it there...
+ Move the Roll stick all the way to the left and hold it there...Move the Roll stick all the way to the right and hold it there...
- Move the Roll stick all the way to the right and hold it there...
+ Move the Roll stick all the way to the right and hold it there...Move the Pitch stick all the way down and hold it there...
- Move the Pitch stick all the way down and hold it there...
+ Move the Pitch stick all the way down and hold it there...Move the Pitch stick all the way up and hold it there...
- Move the Pitch stick all the way up and hold it there...
+ Move the Pitch stick all the way up and hold it there...Allow the Pitch stick to move back to center...
- Allow the Pitch stick to move back to center...
+ Allow the Pitch stick to move back to center...Move all the transmitter switches and/or dials back and forth to their extreme positions.
- Move all the transmitter switches and/or dials back and forth to their extreme positions.
+ Move all the transmitter switches and/or dials back and forth to their extreme positions.All settings have been captured. Click Next to write the new parameters to your board.
- All settings have been captured. Click Next to write the new parameters to your board.
+ All settings have been captured. Click Next to write the new parameters to your board.
@@ -14905,7 +14905,7 @@ Reset all transmitter trims to center.
Please ensure all motor power is disconnected from the vehicle.
Click Next to continue
- Center the Throttle stick as shown in diagram.
+ Center the Throttle stick as shown in diagram.
Reset all transmitter trims to center.
Please ensure all motor power is disconnected from the vehicle.
@@ -14915,19 +14915,19 @@ Click Next to continueNext
- Next
+ NextCalibrate
- Calibrate
+ CalibrateThe current calibration settings are now displayed for each channel on screen.
Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values.
- The current calibration settings are now displayed for each channel on screen.
+ The current calibration settings are now displayed for each channel on screen.
Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values.
@@ -14937,12 +14937,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Rally: %1
- Rally: %1
+ Rally: %1Rally Points supports version %1
- Rally Points supports version %1
+ Rally Points supports version %1
@@ -14950,12 +14950,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Rally Points
- Rally Points
+ Rally PointsRally Points provide alternate landing points when performing a Return to Launch (RTL).
- Rally Points provide alternate landing points when performing a Return to Launch (RTL).
+ Rally Points provide alternate landing points when performing a Return to Launch (RTL).
@@ -14963,12 +14963,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Rally Point
- Rally Point
+ Rally PointDelete
- Delete
+ Delete
@@ -14977,7 +14977,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Rrally point map item label
- R
+ R
@@ -14985,67 +14985,67 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Rover Initial Checks
- Rover Initial Checks
+ Rover Initial ChecksHardware
- Hardware
+ HardwareBattery mounted and secured?
- Battery mounted and secured?
+ Battery mounted and secured?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereMission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?Wind & weather
- Wind & weather
+ Wind & weatherOK for your platform?
- OK for your platform?
+ OK for your platform?Mission area
- Mission area
+ Mission areaMission area and path free of obstacles/people?
- Mission area and path free of obstacles/people?
+ Mission area and path free of obstacles/people?
@@ -15053,57 +15053,57 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
SHP file load failed. %1
- SHP file load failed. %1
+ SHP file load failed. %1UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/S
- UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/S
+ UTM projection is not in supported format. Must be PROJCS["WGS_1984_UTM_Zone_##N/SOnly WGS84 or UTM projections are supported.
- Only WGS84 or UTM projections are supported.
+ Only WGS84 or UTM projections are supported.PRJ file open failed: %1
- PRJ file open failed: %1
+ PRJ file open failed: %1File not found: %1
- File not found: %1
+ File not found: %1File is not a .shp file: %1
- File is not a .shp file: %1
+ File is not a .shp file: %1SHPOpen failed.
- SHPOpen failed.
+ SHPOpen failed.More than one entity found.
- More than one entity found.
+ More than one entity found.No supported types found.
- No supported types found.
+ No supported types found.File does not contain a polygon.
- File does not contain a polygon.
+ File does not contain a polygon.Only single part polygons are supported.
- Only single part polygons are supported.
+ Only single part polygons are supported.
@@ -15112,7 +15112,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Low Battery Failsafe Trigger
- Low Battery Failsafe Trigger
+ Low Battery Failsafe Trigger
@@ -15122,37 +15122,37 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Failsafe Action:
- Failsafe Action:
+ Failsafe Action:Battery Warn Level:
- Battery Warn Level:
+ Battery Warn Level:Battery Failsafe Level:
- Battery Failsafe Level:
+ Battery Failsafe Level:Battery Emergency Level:
- Battery Emergency Level:
+ Battery Emergency Level:Object Detection
- Object Detection
+ Object DetectionCollision Prevention:
- Collision Prevention:
+ Collision Prevention:
@@ -15162,7 +15162,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Disabled
- Disabled
+ Disabled
@@ -15172,168 +15172,168 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Enabled
- Enabled
+ EnabledObstacle Avoidance:
- Obstacle Avoidance:
+ Obstacle Avoidance:Minimum Distance: (
- Minimum Distance: (
+ Minimum Distance: (Show obstacle distance overlay
- Show obstacle distance overlay
+ Show obstacle distance overlayRC Loss Failsafe Trigger
- RC Loss Failsafe Trigger
+ RC Loss Failsafe TriggerRC Loss Timeout:
- RC Loss Timeout:
+ RC Loss Timeout:Data Link Loss Failsafe Trigger
- Data Link Loss Failsafe Trigger
+ Data Link Loss Failsafe TriggerData Link Loss Timeout:
- Data Link Loss Timeout:
+ Data Link Loss Timeout:Geofence Failsafe Trigger
- Geofence Failsafe Trigger
+ Geofence Failsafe TriggerAction on breach:
- Action on breach:
+ Action on breach:Max Radius:
- Max Radius:
+ Max Radius:Max Altitude:
- Max Altitude:
+ Max Altitude:Return To Launch Settings
- Return To Launch Settings
+ Return To Launch SettingsReturn to launch, then:
- Return to launch, then:
+ Return to launch, then:Telemetry logging to vehicle storage:
- Telemetry logging to vehicle storage:
+ Telemetry logging to vehicle storage:Climb to altitude of:
- Climb to altitude of:
+ Climb to altitude of:Land immediately
- Land immediately
+ Land immediatelyLoiter and do not land
- Loiter and do not land
+ Loiter and do not landLoiter and land after specified time
- Loiter and land after specified time
+ Loiter and land after specified timeLoiter Time
- Loiter Time
+ Loiter TimeLoiter Altitude
- Loiter Altitude
+ Loiter AltitudeLand Mode Settings
- Land Mode Settings
+ Land Mode SettingsLanding Descent Rate:
- Landing Descent Rate:
+ Landing Descent Rate:Disarm After:
- Disarm After:
+ Disarm After:Vehicle Telemetry Logging
- Vehicle Telemetry Logging
+ Vehicle Telemetry LoggingHardware in the Loop Simulation
- Hardware in the Loop Simulation
+ Hardware in the Loop SimulationHITL Enabled:
- HITL Enabled:
+ HITL Enabled:Safety
- Safety
+ Safety
@@ -15342,67 +15342,67 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Low Battery Failsafe
- Low Battery Failsafe
+ Low Battery FailsafeRC Loss Failsafe
- RC Loss Failsafe
+ RC Loss FailsafeRC Loss Timeout
- RC Loss Timeout
+ RC Loss TimeoutData Link Loss Failsafe
- Data Link Loss Failsafe
+ Data Link Loss FailsafeRTL Climb To
- RTL Climb To
+ RTL Climb ToRTL, Then
- RTL, Then
+ RTL, ThenLand immediately
- Land immediately
+ Land immediatelyLoiter and do not land
- Loiter and do not land
+ Loiter and do not landLoiter and land after specified time
- Loiter and land after specified time
+ Loiter and land after specified timeLoiter Alt
- Loiter Alt
+ Loiter AltLand Delay
- Land Delay
+ Land Delay
@@ -15410,12 +15410,12 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Sensors
- Sensors
+ SensorsSensors Setup is used to calibrate the sensors within your vehicle.
- Sensors Setup is used to calibrate the sensors within your vehicle.
+ Sensors Setup is used to calibrate the sensors within your vehicle.
@@ -15423,52 +15423,52 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Calibration complete
- Calibration complete
+ Calibration completeCalibration failed. Calibration log will be displayed.
- Calibration failed. Calibration log will be displayed.
+ Calibration failed. Calibration log will be displayed.Unsupported calibration firmware version, using log
- Unsupported calibration firmware version, using log
+ Unsupported calibration firmware version, using logPlace your vehicle into one of the Incomplete orientations shown below and hold it still
- Place your vehicle into one of the Incomplete orientations shown below and hold it still
+ Place your vehicle into one of the Incomplete orientations shown below and hold it stillRotate the vehicle continuously as shown in the diagram until marked as Completed
- Rotate the vehicle continuously as shown in the diagram until marked as Completed
+ Rotate the vehicle continuously as shown in the diagram until marked as CompletedHold still in the current orientation
- Hold still in the current orientation
+ Hold still in the current orientationPlace you vehicle into one of the orientations shown below and hold it still
- Place you vehicle into one of the orientations shown below and hold it still
+ Place you vehicle into one of the orientations shown below and hold it stillOrientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it still
- Orientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it still
+ Orientation already completed, place you vehicle into one of the incomplete orientations shown below and hold it stillReset successful
- Reset successful
+ Reset successfulReset failed
- Reset failed
+ Reset failed
@@ -15477,7 +15477,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Compass 0
- Compass 0
+ Compass 0
@@ -15487,7 +15487,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Setup required
- Setup required
+ Setup required
@@ -15501,31 +15501,31 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Ready
- Ready
+ ReadyCompass 1
- Compass 1
+ Compass 1Compass 2
- Compass 2
+ Compass 2Gyro
- Gyro
+ GyroAccelerometer
- Accelerometer
+ Accelerometer
@@ -15534,7 +15534,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Compass:
- Compass:
+ Compass:
@@ -15546,7 +15546,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Setup required
- Setup required
+ Setup required
@@ -15558,25 +15558,25 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Ready
- Ready
+ ReadyGyro:
- Gyro:
+ Gyro:Accelerometer:
- Accelerometer:
+ Accelerometer:Airspeed:
- Airspeed:
+ Airspeed:
@@ -15587,85 +15587,85 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
If the orientation is in the direction of flight, select ROTATION_NONE.
- If the orientation is in the direction of flight, select ROTATION_NONE.
+ If the orientation is in the direction of flight, select ROTATION_NONE.For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration.
- For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration.
+ For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor. Do not touch the sensor or obstruct any holes during the calibration.Start the individual calibration steps by clicking one of the buttons to the left.
- Start the individual calibration steps by clicking one of the buttons to the left.
+ Start the individual calibration steps by clicking one of the buttons to the left.Compass Calibration Complete
- Compass Calibration Complete
+ Compass Calibration CompleteCalibration Cancel
- Calibration Cancel
+ Calibration CancelSensor Calibration
- Sensor Calibration
+ Sensor CalibrationPerforming sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead.
- Performing sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead.
+ Performing sensor calibration over a WiFi connection is known to be unreliable. You should disconnect and perform calibration using a direct USB connection instead.Waiting for Vehicle to response to Cancel. This may take a few seconds.
- Waiting for Vehicle to response to Cancel. This may take a few seconds.
+ Waiting for Vehicle to response to Cancel. This may take a few seconds.Set autopilot orientation before calibrating.
- Set autopilot orientation before calibrating.
+ Set autopilot orientation before calibrating.Reboot Vehicle
- Reboot Vehicle
+ Reboot VehicleFor Compass calibration you will need to rotate your vehicle through a number of positions.
- For Compass calibration you will need to rotate your vehicle through a number of positions.
+ For Compass calibration you will need to rotate your vehicle through a number of positions.For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
- For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.
+ For Gyroscope calibration you will need to place your vehicle on a surface and leave it still.For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.
- For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.
+ For Accelerometer calibration you will need to place your vehicle on all six sides on a perfectly level surface and hold it still in each orientation for a few seconds.To level the horizon you need to place the vehicle in its level flight position and leave still.
- To level the horizon you need to place the vehicle in its level flight position and leave still.
+ To level the horizon you need to place the vehicle in its level flight position and leave still.
@@ -15673,25 +15673,25 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Autopilot Orientation
- Autopilot Orientation
+ Autopilot OrientationROTATION_NONE indicates component points in direction of flight.
- ROTATION_NONE indicates component points in direction of flight.
+ ROTATION_NONE indicates component points in direction of flight.Click Ok to start calibration.
- Click Ok to start calibration.
+ Click Ok to start calibration.Reboot the vehicle prior to flight.
- Reboot the vehicle prior to flight.
+ Reboot the vehicle prior to flight.
@@ -15699,7 +15699,7 @@ Click the Next button to upload calibration to board. Click Cancel if you don&ap
Adjust orientations as needed.
ROTATION_NONE indicates component points in direction of flight.
- Adjust orientations as needed.
+ Adjust orientations as needed.
ROTATION_NONE indicates component points in direction of flight.
@@ -15707,43 +15707,43 @@ ROTATION_NONE indicates component points in direction of flight.
Mag %1 Orientation
- Mag %1 Orientation
+ Mag %1 OrientationCompass
- Compass
+ CompassCalibrate Compass
- Calibrate Compass
+ Calibrate CompassGyroscope
- Gyroscope
+ GyroscopeCalibrate Gyro
- Calibrate Gyro
+ Calibrate GyroAccelerometer
- Accelerometer
+ AccelerometerCalibrate Accelerometer
- Calibrate Accelerometer
+ Calibrate Accelerometer
@@ -15751,43 +15751,43 @@ ROTATION_NONE indicates component points in direction of flight.
Level Horizon
- Level Horizon
+ Level HorizonAirspeed
- Airspeed
+ AirspeedCalibrate Airspeed
- Calibrate Airspeed
+ Calibrate AirspeedCancel
- Cancel
+ CancelNext
- Next
+ NextOrientations
- Orientations
+ OrientationsSet Orientations
- Set Orientations
+ Set Orientations
@@ -15803,7 +15803,7 @@ ROTATION_NONE indicates component points in direction of flight.
Rotate
- Rotate
+ Rotate
@@ -15819,13 +15819,13 @@ ROTATION_NONE indicates component points in direction of flight.
Hold Still
- Hold Still
+ Hold StillFactory reset
- Factory reset
+ Factory reset
@@ -15833,7 +15833,7 @@ ROTATION_NONE indicates component points in direction of flight.
Serial Link Settings
- Serial Link Settings
+ Serial Link Settings
@@ -15841,22 +15841,22 @@ ROTATION_NONE indicates component points in direction of flight.
Could not send data - link %1 is disconnected!
- Could not send data - link %1 is disconnected!
+ Could not send data - link %1 is disconnected!Error connecting: Could not create port. %1
- Error connecting: Could not create port. %1
+ Error connecting: Could not create port. %1Could not read data - link %1 is disconnected!
- Could not read data - link %1 is disconnected!
+ Could not read data - link %1 is disconnected!Link Error
- Link Error
+ Link Error
@@ -15864,62 +15864,62 @@ ROTATION_NONE indicates component points in direction of flight.
Baud rate name not in combo box
- Baud rate name not in combo box
+ Baud rate name not in combo boxEnable Flow Control
- Enable Flow Control
+ Enable Flow ControlSerial Port
- Serial Port
+ Serial PortNone Available
- None Available
+ None AvailableBaud Rate
- Baud Rate
+ Baud RateAdvanced Settings
- Advanced Settings
+ Advanced SettingsParity
- Parity
+ ParityNone
- None
+ NoneEven
- Even
+ EvenOdd
- Odd
+ OddData Bits
- Data Bits
+ Data BitsStop Bits
- Stop Bits
+ Stop Bits
@@ -15927,27 +15927,27 @@ ROTATION_NONE indicates component points in direction of flight.
armed
- armed
+ armedflying
- flying
+ flying%1 Setup
- %1 Setup
+ %1 SetupAdvanced
- Advanced
+ Advanced (Disabled while the vehicle is %1)
- (Disabled while the vehicle is %1)
+ (Disabled while the vehicle is %1)
@@ -15955,62 +15955,62 @@ ROTATION_NONE indicates component points in direction of flight.
This operation cannot be performed while the vehicle is armed.
- This operation cannot be performed while the vehicle is armed.
+ This operation cannot be performed while the vehicle is armed.missing message panel text
- missing message panel text
+ missing message panel text%1 setup must be completed prior to %2 setup.
- %1 setup must be completed prior to %2 setup.
+ %1 setup must be completed prior to %2 setup.%1 does not currently support setup of your vehicle type.
- %1 does not currently support setup of your vehicle type.
+ %1 does not currently support setup of your vehicle type. Vehicle settings and info will display after connecting your vehicle.
- Vehicle settings and info will display after connecting your vehicle.
+ Vehicle settings and info will display after connecting your vehicle.You are currently connected to a vehicle but it did not return the full parameter list.
- You are currently connected to a vehicle but it did not return the full parameter list.
+ You are currently connected to a vehicle but it did not return the full parameter list. As a result, the full set of vehicle setup options are not available.
- As a result, the full set of vehicle setup options are not available.
+ As a result, the full set of vehicle setup options are not available.Summary
- Summary
+ SummaryFirmware
- Firmware
+ FirmwarePX4Flow
- PX4Flow
+ PX4FlowJoystick
- Joystick
+ JoystickParameters
- Parameters
+ Parameters
@@ -16018,27 +16018,27 @@ ROTATION_NONE indicates component points in direction of flight.
Shape file load failed. %1
- Shape file load failed. %1
+ Shape file load failed. %1Unsupported file type. Only .%1 and .%2 are supported.
- Unsupported file type. Only .%1 and .%2 are supported.
+ Unsupported file type. Only .%1 and .%2 are supported.Polyline not support from SHP files.
- Polyline not support from SHP files.
+ Polyline not support from SHP files.KML Files (*.%1)
- KML Files (*.%1)
+ KML Files (*.%1)KML/SHP Files (*.%1 *.%2)
- KML/SHP Files (*.%1 *.%2)
+ KML/SHP Files (*.%1 *.%2)
@@ -16046,87 +16046,87 @@ ROTATION_NONE indicates component points in direction of flight.
Move '%1' %2 to the %3 location. %4
- Move '%1' %2 to the %3 location. %4
+ Move '%1' %2 to the %3 location. %4Altitude
- Altitude
+ AltitudeInternal Error
- Internal Error
+ Internal ErrorProvides advanced access to all commands/parameters. Be very careful!
- Provides advanced access to all commands/parameters. Be very careful!
+ Provides advanced access to all commands/parameters. Be very careful!T
- T
+ TTransition Direction
- Transition Direction
+ Transition DirectionTakeoff
- Takeoff
+ Takeoffdesired
- desired
+ desiredclimbout
- climbout
+ climboutEnsure distance from launch to transition direction is far enough to complete transition.
- Ensure distance from launch to transition direction is far enough to complete transition.
+ Ensure distance from launch to transition direction is far enough to complete transition.Ensure clear of obstacles and into the wind.
- Ensure clear of obstacles and into the wind.
+ Ensure clear of obstacles and into the wind.Done
- Done
+ DoneClick in map to set planned Takeoff location.
- Click in map to set planned Takeoff location.
+ Click in map to set planned Takeoff location.Click in map to set planned Launch location.
- Click in map to set planned Launch location.
+ Click in map to set planned Launch location.Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location.
- Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location.
+ Altitude below specifies the approximate altitude of the ground. Normally 0 for landing back at original launch location.Actual AMSL alt sent: %1 %2
- Actual AMSL alt sent: %1 %2
+ Actual AMSL alt sent: %1 %2Flight Speed
- Flight Speed
+ Flight Speed
@@ -16134,42 +16134,42 @@ ROTATION_NONE indicates component points in direction of flight.
Unknown: %1
- Unknown: %1
+ Unknown: %1L
- L
+ LTakeoff
- Takeoff
+ TakeoffLand
- Land
+ LandTransition Direction
- Transition Direction
+ Transition DirectionVTOL Land
- VTOL Land
+ VTOL LandROI
- ROI
+ ROILoiter
- Loiter
+ Loiter
@@ -16177,19 +16177,19 @@ ROTATION_NONE indicates component points in direction of flight.
%1 does not support loading this complex mission item type: %2:%3
- %1 does not support loading this complex mission item type: %2:%3
+ %1 does not support loading this complex mission item type: %2:%3%1 version %2 not supported
- %1 version %2 not supported
+ %1 version %2 not supportedStructure Scan
- Structure Scan
+ Structure Scan
@@ -16197,119 +16197,119 @@ ROTATION_NONE indicates component points in direction of flight.
Use the Polygon Tools to create the polygon which outlines the structure.
- Use the Polygon Tools to create the polygon which outlines the structure.
+ Use the Polygon Tools to create the polygon which outlines the structure.Grid
- Grid
+ GridCamera
- Camera
+ CameraNote: Polygon respresents structure surface not vehicle flight path.
- Note: Polygon respresents structure surface not vehicle flight path.
+ Note: Polygon respresents structure surface not vehicle flight path.WARNING: Photo interval is below minimum interval (%1 secs) supported by camera.
- WARNING: Photo interval is below minimum interval (%1 secs) supported by camera.
+ WARNING: Photo interval is below minimum interval (%1 secs) supported by camera.Scan Distance
- Scan Distance
+ Scan DistanceLayer Height
- Layer Height
+ Layer HeightTrigger Distance
- Trigger Distance
+ Trigger DistanceScan
- Scan
+ ScanStart Scan From Bottom
- Start Scan From Bottom
+ Start Scan From BottomStart Scan From Top
- Start Scan From Top
+ Start Scan From TopStructure Height
- Structure Height
+ Structure HeightScan Bottom Alt
- Scan Bottom Alt
+ Scan Bottom AltEntrance/Exit Alt
- Entrance/Exit Alt
+ Entrance/Exit AltGimbal Pitch
- Gimbal Pitch
+ Gimbal PitchRotate entry point
- Rotate entry point
+ Rotate entry pointStatistics
- Statistics
+ StatisticsLayers
- Layers
+ LayersTop Layer Alt
- Top Layer Alt
+ Top Layer AltBottom Layer Alt
- Bottom Layer Alt
+ Bottom Layer AltPhoto Count
- Photo Count
+ Photo CountPhoto Interval
- Photo Interval
+ Photo Intervalsecs
- secs
+ secs
@@ -16317,67 +16317,67 @@ ROTATION_NONE indicates component points in direction of flight.
Submarine Initial checks
- Submarine Initial checks
+ Submarine Initial checksHardware
- Hardware
+ HardwareAll seals in place?
- All seals in place?
+ All seals in place?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereActuators
- Actuators
+ ActuatorsMove all control surfaces. Did they work properly?
- Move all control surfaces. Did they work properly?
+ Move all control surfaces. Did they work properly?Motors
- Motors
+ MotorsPropellers free? Then throttle up gently. Working properly?
- Propellers free? Then throttle up gently. Working properly?
+ Propellers free? Then throttle up gently. Working properly?Mission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?
@@ -16385,30 +16385,30 @@ ROTATION_NONE indicates component points in direction of flight.
Survey items do not support version %1
- Survey items do not support version %1
+ Survey items do not support version %1%1 does not support loading this complex mission item type: %2:%3
- %1 does not support loading this complex mission item type: %2:%3
+ %1 does not support loading this complex mission item type: %2:%3%1 but %2 object is missing
- %1 but %2 object is missing
+ %1 but %2 object is missingSurvey
- Survey
+ SurveyS
- S
+ S
@@ -16416,47 +16416,47 @@ ROTATION_NONE indicates component points in direction of flight.
Use the Polygon Tools to create the polygon which outlines your survey area.
- Use the Polygon Tools to create the polygon which outlines your survey area.
+ Use the Polygon Tools to create the polygon which outlines your survey area.Transects
- Transects
+ TransectsAngle
- Angle
+ AngleTurnaround dist
- Turnaround dist
+ Turnaround distHover and capture image
- Hover and capture image
+ Hover and capture imageRefly at 90 deg offset
- Refly at 90 deg offset
+ Refly at 90 deg offsetImages in turnarounds
- Images in turnarounds
+ Images in turnaroundsFly alternate transects
- Fly alternate transects
+ Fly alternate transectsSelect Polygon File
- Select Polygon File
+ Select Polygon File
@@ -16464,17 +16464,17 @@ ROTATION_NONE indicates component points in direction of flight.
Error
- Error
+ ErrorNormal
- Normal
+ NormalDisabled
- Disabled
+ Disabled
@@ -16482,32 +16482,32 @@ ROTATION_NONE indicates component points in direction of flight.
Radio Settings
- Radio Settings
+ Radio SettingsChannel
- Channel
+ ChannelAddress
- Address
+ AddressData Rate
- Data Rate
+ Data RateSyslink
- Syslink
+ SyslinkThe Syslink Component is used to setup the radio connection on Crazyflies.
- The Syslink Component is used to setup the radio connection on Crazyflies.
+ The Syslink Component is used to setup the radio connection on Crazyflies.
@@ -16515,7 +16515,7 @@ ROTATION_NONE indicates component points in direction of flight.
TCP Link Settings
- TCP Link Settings
+ TCP Link Settings
@@ -16524,17 +16524,17 @@ ROTATION_NONE indicates component points in direction of flight.
Link Error
- Link Error
+ Link ErrorError on link %1. Connection failed
- Error on link %1. Connection failed
+ Error on link %1. Connection failedError on link %1. Error on socket: %2.
- Error on link %1. Error on socket: %2.
+ Error on link %1. Error on socket: %2.
@@ -16542,37 +16542,37 @@ ROTATION_NONE indicates component points in direction of flight.
Auto
- Auto
+ AutoManual
- Manual
+ ManualStream
- Stream
+ StreamHDMI Port
- HDMI Port
+ HDMI PortLow
- Low
+ LowMedium
- Medium
+ MediumHigh
- High
+ High
@@ -16580,69 +16580,69 @@ ROTATION_NONE indicates component points in direction of flight.
Reboot ground unit for changes to take effect.
- Reboot ground unit for changes to take effect.
+ Reboot ground unit for changes to take effect.General
- General
+ GeneralEnable Taisync
- Enable Taisync
+ Enable TaisyncEnable Taisync Video
- Enable Taisync Video
+ Enable Taisync VideoConnection Status
- Connection Status
+ Connection StatusGround Unit:
- Ground Unit:
+ Ground Unit:Connected
- Connected
+ ConnectedNot Connected
- Not Connected
+ Not ConnectedAir Unit:
- Air Unit:
+ Air Unit:Uplink RSSI:
- Uplink RSSI:
+ Uplink RSSI:Downlink RSSI:
- Downlink RSSI:
+ Downlink RSSI:Device Info
- Device Info
+ Device InfoSerial Number:
- Serial Number:
+ Serial Number:
@@ -16652,114 +16652,114 @@ ROTATION_NONE indicates component points in direction of flight.
Firmware Version:
- Firmware Version:
+ Firmware Version:Radio Settings
- Radio Settings
+ Radio SettingsRadio Mode:
- Radio Mode:
+ Radio Mode:Radio Frequency:
- Radio Frequency:
+ Radio Frequency:Video Settings
- Video Settings
+ Video SettingsVideo Output:
- Video Output:
+ Video Output:Encoder:
- Encoder:
+ Encoder:Bit Rate:
- Bit Rate:
+ Bit Rate:Streaming Settings
- Streaming Settings
+ Streaming SettingsRTSP URI:
- RTSP URI:
+ RTSP URI:Account:
- Account:
+ Account:Password:
- Password:
+ Password:Apply
- Apply
+ ApplySet Streaming Settings
- Set Streaming Settings
+ Set Streaming SettingsOnce changed, you will need to reboot the ground unit for the changes to take effect.
Confirm change?
- Once changed, you will need to reboot the ground unit for the changes to take effect.
+ Once changed, you will need to reboot the ground unit for the changes to take effect.
Confirm change?Network Settings
- Network Settings
+ Network SettingsLocal IP Address:
- Local IP Address:
+ Local IP Address:Ground Unit IP Address:
- Ground Unit IP Address:
+ Ground Unit IP Address:Network Mask:
- Network Mask:
+ Network Mask:Set Network Settings
- Set Network Settings
+ Set Network SettingsOnce changed, you will need to reboot the ground unit for the changes to take effect. The local IP address must match the one entered (%1).
Confirm change?
- Once changed, you will need to reboot the ground unit for the changes to take effect. The local IP address must match the one entered (%1).
+ Once changed, you will need to reboot the ground unit for the changes to take effect. The local IP address must match the one entered (%1).
Confirm change?
@@ -16769,7 +16769,7 @@ Confirm change?
Launch
- Launch
+ Launch
@@ -16777,12 +16777,12 @@ Confirm change?
Server Address
- Server Address
+ Server AddressPort
- Port
+ Port
@@ -16790,42 +16790,42 @@ Confirm change?
Telemetry RSSI Status
- Telemetry RSSI Status
+ Telemetry RSSI StatusLocal RSSI:
- Local RSSI:
+ Local RSSI:Remote RSSI:
- Remote RSSI:
+ Remote RSSI:RX Errors:
- RX Errors:
+ RX Errors:Errors Fixed:
- Errors Fixed:
+ Errors Fixed:TX Buffer:
- TX Buffer:
+ TX Buffer:Local Noise:
- Local Noise:
+ Local Noise:Remote Noise:
- Remote Noise:
+ Remote Noise:
@@ -16833,12 +16833,12 @@ Confirm change?
Terrain Load Progress
- Terrain Load Progress
+ Terrain Load ProgressDone
- Done
+ Done
@@ -16846,7 +16846,7 @@ Confirm change?
Height AMSL (%1)
- Height AMSL (%1)
+ Height AMSL (%1)
@@ -16854,18 +16854,18 @@ Confirm change?
TransectStyleComplexItem version %2 not supported
- TransectStyleComplexItem version %2 not supported
+ TransectStyleComplexItem version %2 not supportedTransect
- Transect
+ TransectT
- T
+ T
@@ -16873,94 +16873,94 @@ Confirm change?
Done
- Done
+ DoneWARNING: Photo interval is below minimum interval (%1 secs) supported by camera.
- WARNING: Photo interval is below minimum interval (%1 secs) supported by camera.
+ WARNING: Photo interval is below minimum interval (%1 secs) supported by camera.Altitude
- Altitude
+ AltitudeTrigger Dist
- Trigger Dist
+ Trigger DistSpacing
- Spacing
+ SpacingRotate Entry Point
- Rotate Entry Point
+ Rotate Entry PointStatistics
- Statistics
+ StatisticsPresets
- Presets
+ PresetsApply Preset
- Apply Preset
+ Apply PresetDelete Preset
- Delete Preset
+ Delete PresetAre you sure you want to delete '%1' preset?
- Are you sure you want to delete '%1' preset?
+ Are you sure you want to delete '%1' preset?Save Settings As New Preset
- Save Settings As New Preset
+ Save Settings As New PresetSave Preset
- Save Preset
+ Save PresetSave the current settings as a named preset.
- Save the current settings as a named preset.
+ Save the current settings as a named preset.Preset Name
- Preset Name
+ Preset NameEnter preset name
- Enter preset name
+ Enter preset namePreset name cannot be blank.
- Preset name cannot be blank.
+ Preset name cannot be blank.Preset name cannot include the "/" character.
- Preset name cannot include the "/" character.
+ Preset name cannot include the "/" character.
@@ -16968,27 +16968,27 @@ Confirm change?
Survey Area
- Survey Area
+ Survey AreaPhoto Count
- Photo Count
+ Photo CountPhoto Interval
- Photo Interval
+ Photo Intervalsecs
- secs
+ secsTrigger Distance
- Trigger Distance
+ Trigger Distance
@@ -16996,17 +16996,17 @@ Confirm change?
Tolerance
- Tolerance
+ ToleranceMax Climb Rate
- Max Climb Rate
+ Max Climb RateMax Descent Rate
- Max Descent Rate
+ Max Descent Rate
@@ -17014,92 +17014,92 @@ Confirm change?
UNINIT
- UNINIT
+ UNINITUnitialized, booting up.
- Unitialized, booting up.
+ Unitialized, booting up.BOOT
- BOOT
+ BOOTBooting system, please wait.
- Booting system, please wait.
+ Booting system, please wait.CALIBRATING
- CALIBRATING
+ CALIBRATINGCalibrating sensors, please wait.
- Calibrating sensors, please wait.
+ Calibrating sensors, please wait.ACTIVE
- ACTIVE
+ ACTIVEActive, normal operation.
- Active, normal operation.
+ Active, normal operation.STANDBY
- STANDBY
+ STANDBYStandby mode, ready for launch.
- Standby mode, ready for launch.
+ Standby mode, ready for launch.CRITICAL
- CRITICAL
+ CRITICALFAILURE: Continuing operation.
- FAILURE: Continuing operation.
+ FAILURE: Continuing operation.EMERGENCY
- EMERGENCY
+ EMERGENCYEMERGENCY: Land Immediately!
- EMERGENCY: Land Immediately!
+ EMERGENCY: Land Immediately!SHUTDOWN
- SHUTDOWN
+ SHUTDOWNPowering off system.
- Powering off system.
+ Powering off system.UNKNOWN
- UNKNOWN
+ UNKNOWNUnknown system state
- Unknown system state
+ Unknown system state
@@ -17107,42 +17107,42 @@ Confirm change?
EMERGENCY:
- EMERGENCY:
+ EMERGENCY: ALERT:
- ALERT:
+ ALERT: Critical:
- Critical:
+ Critical: Error:
- Error:
+ Error: Warning:
- Warning:
+ Warning: Notice:
- Notice:
+ Notice: Info:
- Info:
+ Info: Debug:
- Debug:
+ Debug:
@@ -17150,7 +17150,7 @@ Confirm change?
UDP Link Settings
- UDP Link Settings
+ UDP Link Settings
@@ -17159,17 +17159,17 @@ Confirm change?
UDP Link Error
- UDP Link Error
+ UDP Link ErrorError binding UDP port: %1
- Error binding UDP port: %1
+ Error binding UDP port: %1Error registering Zeroconf
- Error registering Zeroconf
+ Error registering Zeroconf
@@ -17177,12 +17177,12 @@ Confirm change?
Could not detect ULog file header magic
- Could not detect ULog file header magic
+ Could not detect ULog file header magicCould not detect camera_capture packets in ULog
- Could not detect camera_capture packets in ULog
+ Could not detect camera_capture packets in ULog
@@ -17190,32 +17190,32 @@ Confirm change?
Note: For best perfomance, please disable AutoConnect to UDP devices on the General page.
- Note: For best perfomance, please disable AutoConnect to UDP devices on the General page.
+ Note: For best perfomance, please disable AutoConnect to UDP devices on the General page.Port
- Port
+ PortServer Addresses (optional)
- Server Addresses (optional)
+ Server Addresses (optional)Remove
- Remove
+ RemoveExample: 127.0.0.1:14550
- Example: 127.0.0.1:14550
+ Example: 127.0.0.1:14550Add Server
- Add Server
+ Add Server
@@ -17223,52 +17223,52 @@ Confirm change?
Measurement Units
- Measurement Units
+ Measurement UnitsHorizontal Distance
- Horizontal Distance
+ Horizontal DistanceVertical Distance
- Vertical Distance
+ Vertical DistanceArea
- Area
+ AreaSpeed
- Speed
+ SpeedTemperature
- Temperature
+ TemperatureChoose the measurement units you want to use. You can also change it later in General Settings.
- Choose the measurement units you want to use. You can also change it later in General Settings.
+ Choose the measurement units you want to use. You can also change it later in General Settings.System of units
- System of units
+ System of unitsMetric System
- Metric System
+ Metric SystemImperial System
- Imperial System
+ Imperial System
@@ -17276,7 +17276,7 @@ Confirm change?
Weight units
- Weight units
+ Weight units
@@ -17284,82 +17284,82 @@ Confirm change?
VTOL Initial Checks
- VTOL Initial Checks
+ VTOL Initial ChecksHardware
- Hardware
+ HardwareProps mounted? Wings secured? Tail secured?
- Props mounted? Wings secured? Tail secured?
+ Props mounted? Wings secured? Tail secured?Please arm the vehicle here
- Please arm the vehicle here
+ Please arm the vehicle hereActuators
- Actuators
+ ActuatorsMove all control surfaces. Did they work properly?
- Move all control surfaces. Did they work properly?
+ Move all control surfaces. Did they work properly?Motors
- Motors
+ MotorsPropellers free? Then throttle up gently. Working properly?
- Propellers free? Then throttle up gently. Working properly?
+ Propellers free? Then throttle up gently. Working properly?Mission
- Mission
+ MissionPlease confirm mission is valid (waypoints valid, no terrain collision).
- Please confirm mission is valid (waypoints valid, no terrain collision).
+ Please confirm mission is valid (waypoints valid, no terrain collision).Last preparations before launch
- Last preparations before launch
+ Last preparations before launchPayload
- Payload
+ PayloadConfigured and started? Payload lid closed?
- Configured and started? Payload lid closed?
+ Configured and started? Payload lid closed?OK for your platform? Lauching into the wind?
- OK for your platform? Lauching into the wind?
+ OK for your platform? Lauching into the wind?Flight area
- Flight area
+ Flight areaLaunch area and path free of obstacles/people?
- Launch area and path free of obstacles/people?
+ Launch area and path free of obstacles/people?
@@ -17367,12 +17367,12 @@ Confirm change?
VTOL Landing
- VTOL Landing
+ VTOL Landing%1 complex item version %2 not supported
- %1 complex item version %2 not supported
+ %1 complex item version %2 not supported
@@ -17380,98 +17380,98 @@ Confirm change?
Set to vehicle heading
- Set to vehicle heading
+ Set to vehicle headingSet to vehicle location
- Set to vehicle location
+ Set to vehicle locationFinal approach
- Final approach
+ Final approachUse loiter to altitude
- Use loiter to altitude
+ Use loiter to altitudeAltitude
- Altitude
+ AltitudeRadius
- Radius
+ RadiusLoiter clockwise
- Loiter clockwise
+ Loiter clockwiseLanding point
- Landing point
+ Landing pointHeading
- Heading
+ HeadingLanding Dist
- Landing Dist
+ Landing DistAltitudes relative to launch
- Altitudes relative to launch
+ Altitudes relative to launchCamera
- Camera
+ Camera* Actual flight path will vary.
- * Actual flight path will vary.
+ * Actual flight path will vary.* Avoid tailwind on approach to land.
- * Avoid tailwind on approach to land.
+ * Avoid tailwind on approach to land.* Ensure landing distance is enough to complete transition.
- * Ensure landing distance is enough to complete transition.
+ * Ensure landing distance is enough to complete transition.Click in map to set landing point.
- Click in map to set landing point.
+ Click in map to set landing point.- or -
- - or -
+ - or -Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point.
- Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point.
+ Drag the loiter point to adjust landing direction for wind and obstacles as well as distance to land point.Done
- Done
+ Done
@@ -17479,17 +17479,17 @@ Confirm change?
Loiter
- Loiter
+ LoiterApproach
- Approach
+ ApproachLand
- Land
+ Land
@@ -17497,22 +17497,22 @@ Confirm change?
VTOL: FW
- VTOL: FW
+ VTOL: FWVTOL: MR
- VTOL: MR
+ VTOL: MRVTOL: Fixed Wing
- VTOL: Fixed Wing
+ VTOL: Fixed WingVTOL: Multi-Rotor
- VTOL: Multi-Rotor
+ VTOL: Multi-Rotor
@@ -17520,295 +17520,295 @@ Confirm change?
MAVLink Generic
- MAVLink Generic
+ MAVLink GenericAirship
- Airship
+ AirshipFixed Wing
- Fixed Wing
+ Fixed WingMulti-Rotor
- Multi-Rotor
+ Multi-RotorVTOL
- VTOL
+ VTOLRover
- Rover
+ RoverSub
- Sub
+ SubUnknown
- Unknown
+ Unknown ... Indicates missing chunk from chunked STATUS_TEXT
- ...
+ ... Mission transfer failed. Error: %1
- Mission transfer failed. Error: %1
+ Mission transfer failed. Error: %1GeoFence transfer failed. Error: %1
- GeoFence transfer failed. Error: %1
+ GeoFence transfer failed. Error: %1Rally Point transfer failed. Error: %1
- Rally Point transfer failed. Error: %1
+ Rally Point transfer failed. Error: %1battery %1 level low
- battery %1 level low
+ battery %1 level lowbattery %1 level is critical
- battery %1 level is critical
+ battery %1 level is criticalbattery %1 level emergency
- battery %1 level emergency
+ battery %1 level emergencybattery %1 failed
- battery %1 failed
+ battery %1 failedbattery %1 unhealthy
- battery %1 unhealthy
+ battery %1 unhealthywarning
- warning
+ warningGeneric micro air vehicle
- Generic micro air vehicle
+ Generic micro air vehicleFixed wing aircraft
- Fixed wing aircraft
+ Fixed wing aircraftQuadrotor
- Quadrotor
+ QuadrotorCoaxial helicopter
- Coaxial helicopter
+ Coaxial helicopterNormal helicopter with tail rotor.
- Normal helicopter with tail rotor.
+ Normal helicopter with tail rotor.Ground installation
- Ground installation
+ Ground installationOperator control unit / ground control station
- Operator control unit / ground control station
+ Operator control unit / ground control stationAirship, controlled
- Airship, controlled
+ Airship, controlledFree balloon, uncontrolled
- Free balloon, uncontrolled
+ Free balloon, uncontrolledRocket
- Rocket
+ RocketGround rover
- Ground rover
+ Ground roverSurface vessel, boat, ship
- Surface vessel, boat, ship
+ Surface vessel, boat, shipSubmarine
- Submarine
+ SubmarineHexarotor
- Hexarotor
+ HexarotorOctorotor
- Octorotor
+ OctorotorFlapping wing
- Flapping wing
+ Flapping wingOnboard companion controller
- Onboard companion controller
+ Onboard companion controllerTwo-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter
- Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter
+ Two-rotor VTOL using control surfaces in vertical operation in addition. TailsitterQuad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter
- Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter
+ Quad-rotor VTOL using a V-shaped quad config in vertical operation. TailsitterTiltrotor VTOL
- Tiltrotor VTOL
+ Tiltrotor VTOLVTOL reserved 2
- VTOL reserved 2
+ VTOL reserved 2VTOL reserved 3
- VTOL reserved 3
+ VTOL reserved 3VTOL reserved 4
- VTOL reserved 4
+ VTOL reserved 4VTOL reserved 5
- VTOL reserved 5
+ VTOL reserved 5Onboard gimbal
- Onboard gimbal
+ Onboard gimbalOnboard ADSB peripheral
- Onboard ADSB peripheral
+ Onboard ADSB peripheralVehicle %1
- Vehicle %1
+ Vehicle %1 Vehicle reboot failed.
- Vehicle reboot failed.
+ Vehicle reboot failed.%1 %2 flight mode
- %1 %2 flight mode
+ %1 %2 flight modearmed
- armed
+ armeddisarmed
- disarmed
+ disarmedUnable to send command: %1.
- Unable to send command: %1.
+ Unable to send command: %1.Internal error - MAV_COMP_ID_ALL not supported
- Internal error - MAV_COMP_ID_ALL not supported
+ Internal error - MAV_COMP_ID_ALL not supportedWaiting on previous response to same command.
- Waiting on previous response to same command.
+ Waiting on previous response to same command.Vehicle did not respond to command: %1
- Vehicle did not respond to command: %1
+ Vehicle did not respond to command: %1Bootloader flash succeeded
- Bootloader flash succeeded
+ Bootloader flash succeeded%1 command temporarily rejected
- %1 command temporarily rejected
+ %1 command temporarily rejected%1 command denied
- %1 command denied
+ %1 command denied%1 command not supported
- %1 command not supported
+ %1 command not supported%1 command failed
- %1 command failed
+ %1 command failed
@@ -17816,42 +17816,42 @@ Confirm change?
Airship
- Airship
+ AirshipFixed Wing
- Fixed Wing
+ Fixed WingRover-Boat
- Rover-Boat
+ Rover-BoatSub
- Sub
+ SubMulti-Rotor
- Multi-Rotor
+ Multi-RotorVTOL
- VTOL
+ VTOLGeneric
- Generic
+ GenericUnknown
- Unknown
+ Unknown
@@ -17859,49 +17859,49 @@ Confirm change?
%1Communication regained on %2 link
- %1Communication regained on %2 link
+ %1Communication regained on %2 linkprimary
- primary
+ primarysecondary
- secondary
+ secondary%1Communication regained
- %1Communication regained
+ %1Communication regained%1Switching communication to new primary link
- %1Switching communication to new primary link
+ %1Switching communication to new primary link%1Communication lost on %2 link.
- %1Communication lost on %2 link.
+ %1Communication lost on %2 link.%1Switching communication to secondary link.
- %1Switching communication to secondary link.
+ %1Switching communication to secondary link.%1Communication lost
- %1Communication lost
+ %1Communication lostComm Lost
- Comm Lost
+ Comm Lost
@@ -17909,7 +17909,7 @@ Confirm change?
Vehicle %1
- Vehicle %1
+ Vehicle %1
@@ -17917,17 +17917,17 @@ Confirm change?
Hold Still
- Hold Still
+ Hold StillCompleted
- Completed
+ CompletedIncomplete
- Incomplete
+ Incomplete
@@ -17935,12 +17935,12 @@ Confirm change?
Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component.
- Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component.
+ Below you will find a summary of the settings for your vehicle. To the left are the setup menus for each component.WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left.
- WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left.
+ WARNING: Your vehicle requires setup prior to flight. Please resolve the items marked in red using the menu on the left.
@@ -17948,12 +17948,12 @@ Confirm change?
No GPS Lock for Vehicle
- No GPS Lock for Vehicle
+ No GPS Lock for VehicleThe vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure.
- The vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure.
+ The vehicle has failed a pre-arm check. In order to arm the vehicle, resolve the failure.
@@ -17961,47 +17961,47 @@ Confirm change?
Analyze vibration associated with your vehicle.
- Analyze vibration associated with your vehicle.
+ Analyze vibration associated with your vehicle.X
- X
+ XY
- Y
+ YZ
- Z
+ ZClip count
- Clip count
+ Clip countAccel 1:
- Accel 1:
+ Accel 1: Accel 2:
- Accel 2:
+ Accel 2: Accel 3:
- Accel 3:
+ Accel 3: Not Available
- Not Available
+ Not Available
@@ -18009,17 +18009,17 @@ Confirm change?
Video receiver is not ready.
- Video receiver is not ready.
+ Video receiver is not ready.Invalid video format defined.
- Invalid video format defined.
+ Invalid video format defined.Unabled to record video. Video save path must be specified in Settings.
- Unabled to record video. Video save path must be specified in Settings.
+ Unabled to record video. Video save path must be specified in Settings.
@@ -18027,52 +18027,52 @@ Confirm change?
No Video Available
- No Video Available
+ No Video AvailableVideo Stream Disabled
- Video Stream Disabled
+ Video Stream DisabledRTSP Video Stream
- RTSP Video Stream
+ RTSP Video StreamUDP h.264 Video Stream
- UDP h.264 Video Stream
+ UDP h.264 Video StreamUDP h.265 Video Stream
- UDP h.265 Video Stream
+ UDP h.265 Video StreamTCP-MPEG2 Video Stream
- TCP-MPEG2 Video Stream
+ TCP-MPEG2 Video StreamMPEG-TS (h.264) Video Stream
- MPEG-TS (h.264) Video Stream
+ MPEG-TS (h.264) Video Stream3DR Solo (requires restart)
- 3DR Solo (requires restart)
+ 3DR Solo (requires restart)Parrot Discovery
- Parrot Discovery
+ Parrot DiscoveryYuneec Mantis G
- Yuneec Mantis G
+ Yuneec Mantis G