Merge pull request #1437 from DonLakeFlyer/FactSystem

Cut over more code fully to FactSystem, plus setup view unit test click through

src/AutoPilotPlugins/PX4/AirframeComponent.cc

@@ -142,13 +142,7 @@ bool AirframeComponent::requiresSetup(void) const
 
 bool AirframeComponent::setupComplete(void) const
 {
-    QVariant value;
-    if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), "SYS_AUTOSTART", value)) {
-        return value.toInt() != 0;
-    } else {
-        Q_ASSERT(false);
-        return false;
-    }
+    return _autopilot->getParameterFact("SYS_AUTOSTART")->value().toInt() != 0;
 }
 
 QString AirframeComponent::setupStateDescription(void) const

src/AutoPilotPlugins/PX4/FlightModesComponent.cc

@@ -72,13 +72,7 @@ bool FlightModesComponent::requiresSetup(void) const
 
 bool FlightModesComponent::setupComplete(void) const
 {
-    QVariant value;
-    if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), "RC_MAP_MODE_SW", value)) {
-        return value.toInt() != 0;
-    } else {
-        Q_ASSERT(false);
-        return false;
-    }
+    return _autopilot->getParameterFact("RC_MAP_MODE_SW")->value().toInt() != 0;
 }
 
 QString FlightModesComponent::setupStateDescription(void) const

src/AutoPilotPlugins/PX4/PX4Component.cc

@@ -29,6 +29,12 @@
 PX4Component::PX4Component(UASInterface* uas, AutoPilotPlugin* autopilot, QObject* parent) :
     VehicleComponent(uas, autopilot, parent)
 {
+    Q_ASSERT(uas);
+    Q_ASSERT(autopilot);
+    
+    _paramMgr = _uas->getParamManager();
+    Q_ASSERT(_paramMgr);
+
     bool fSuccess = connect(_paramMgr, SIGNAL(parameterUpdated(int, QString, QVariant)), this, SLOT(_parameterUpdated(int, QString, QVariant)));
     Q_ASSERT(fSuccess);
     Q_UNUSED(fSuccess);

src/AutoPilotPlugins/PX4/PX4Component.h

@@ -47,6 +47,9 @@ private slots:
     /// @brief Connected to QGCUASParamManagerInterface::parameterUpdated signal in order to signal
     ///         setupCompleteChanged at appropriate times.
     void _parameterUpdated(int compId, QString paramName, QVariant value);
+    
+private:
+    QGCUASParamManagerInterface*    _paramMgr;
 };
 
 #endif

src/AutoPilotPlugins/PX4/PowerComponent.cc

@@ -58,15 +58,9 @@ bool PowerComponent::requiresSetup(void) const
 bool PowerComponent::setupComplete(void) const
 {
     QVariant cvalue, evalue, nvalue;
-    if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), "BAT_V_CHARGED", cvalue)) {
-        if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), "BAT_V_EMPTY", evalue)) {
-            if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), "BAT_N_CELLS", nvalue)) {
-                return (cvalue.toFloat() > 0.1f) && (evalue.toFloat() > 0.1f) && (nvalue.toInt() > 0);
-            }
-        }
-    }
-    Q_ASSERT(false);
-    return false;
+    return _autopilot->getParameterFact("BAT_V_CHARGED")->value().toFloat() != 0.0f &&
+        _autopilot->getParameterFact("BAT_V_EMPTY")->value().toFloat() != 0.0f &&
+        _autopilot->getParameterFact("BAT_N_CELLS")->value().toInt() != 0;
 }
 
 QString PowerComponent::setupStateDescription(void) const

src/AutoPilotPlugins/PX4/RadioComponent.cc

@@ -62,13 +62,7 @@ bool RadioComponent::setupComplete(void) const
     QStringList attitudeMappings;
     attitudeMappings << "RC_MAP_ROLL" << "RC_MAP_PITCH" << "RC_MAP_YAW" << "RC_MAP_THROTTLE";
     foreach(QString mapParam, attitudeMappings) {
-        QVariant value;
-        if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), mapParam, value)) {
-            if (value.toInt() == 0) {
-                return false;
-            }
-        } else {
-            Q_ASSERT(false);
+        if (_autopilot->getParameterFact(mapParam)->value().toInt() == 0) {
             return false;
         }
     }
@@ -86,28 +80,13 @@ bool RadioComponent::setupComplete(void) const
         QString param;
         
         param = QString("RC%1_MIN").arg(i);
-        if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), param, value)) {
-            rcMin = value.toInt();
-        } else {
-            Q_ASSERT(false);
-            return false;
-        }
+        rcMin = _autopilot->getParameterFact(param)->value().toInt();
         
         param = QString("RC%1_MAX").arg(i);
-        if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), param, value)) {
-            rcMax = value.toInt();
-        } else {
-            Q_ASSERT(false);
-            return false;
-        }
+        rcMax = _autopilot->getParameterFact(param)->value().toInt();
         
         param = QString("RC%1_TRIM").arg(i);
-        if (_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), param, value)) {
-            rcTrim = value.toInt();
-        } else {
-            Q_ASSERT(false);
-            return false;
-        }
+        rcTrim = _autopilot->getParameterFact(param)->value().toInt();
         
         if (rcMin == rcMinDefault && rcMax == rcMaxDefault && rcTrim == rcTrimDefault) {
             return false;

src/AutoPilotPlugins/PX4/SensorsComponent.cc

@@ -62,14 +62,7 @@ bool SensorsComponent::requiresSetup(void) const
 bool SensorsComponent::setupComplete(void) const
 {
     foreach(QString triggerParam, setupCompleteChangedTriggerList()) {
-        QVariant value;
-        
-        if (!_paramMgr->getParameterValue(_paramMgr->getDefaultComponentId(), triggerParam, value)) {
-            Q_ASSERT(false);
-            return false;
-        }
-        
-        if (value.toFloat() == 0.0f) {
+        if (_autopilot->getParameterFact(triggerParam)->value().toFloat() == 0.0f) {
             return false;
         }
     }

src/VehicleSetup/SetupViewTest.cc

@@ -27,6 +27,9 @@
 #include "SetupViewTest.h"
 #include "MockLink.h"
 #include "QGCMessageBox.h"
+#include "SetupView.h"
+#include "UASManager.h"
+#include "AutoPilotPluginManager.h"
 
 UT_REGISTER_TEST(SetupViewTest)
 
@@ -72,8 +75,30 @@ void SetupViewTest::_clickThrough_test(void)
     _mainToolBar->onSetupView();
     QTest::qWait(1000);
     
-    // Click through all the setup buttons
-    // FIXME: NYI
+    MainWindow* mainWindow = MainWindow::instance();
+    Q_ASSERT(mainWindow);
+    QWidget* setupViewWidget = mainWindow->getCurrentViewWidget();
+    Q_ASSERT(setupViewWidget);
+    SetupView* setupView = qobject_cast<SetupView*>(setupViewWidget);
+    Q_ASSERT(setupView);
+
+    // Click through fixed buttons
+    setupView->firmwareButtonClicked();
+    QTest::qWait(1000);
+    setupView->parametersButtonClicked();
+    QTest::qWait(1000);
+    setupView->summaryButtonClicked();
+    QTest::qWait(1000);
+    
+    // Click through component buttons
+    UASInterface* uas = UASManager::instance()->getActiveUAS();
+    Q_ASSERT(uas);
+    AutoPilotPlugin* autopilot = AutoPilotPluginManager::instance()->getInstanceForAutoPilotPlugin(uas);
+    Q_ASSERT(autopilot);
+    const QVariantList& components = autopilot->vehicleComponents();
+    foreach(QVariant varComponent, components) {
+        setupView->setupButtonClicked(varComponent);
+    }
 
     // On MainWindow close we should get a message box telling the user to disconnect first. Disconnect will then pop
     // the log file save dialog.

src/VehicleSetup/VehicleComponent.cc

@@ -34,9 +34,6 @@ VehicleComponent::VehicleComponent(UASInterface* uas, AutoPilotPlugin* autopilot
 {
     Q_ASSERT(uas);
     Q_ASSERT(autopilot);
-    
-    _paramMgr = _uas->getParamManager();
-    Q_ASSERT(_paramMgr);
 }
 
 VehicleComponent::~VehicleComponent()

src/VehicleSetup/VehicleComponent.h

@@ -75,7 +75,6 @@ signals:
 protected:
     UASInterface*                   _uas;
     AutoPilotPlugin*                _autopilot;
-    QGCUASParamManagerInterface*    _paramMgr;
 };
 
 #endif

src/ui/MainWindow.h

@@ -125,6 +125,8 @@ public:
     /// @brief Gets a pointer to the Main Tool Bar
     MainToolBar* getMainToolBar(void) { return _mainToolBar; }
     
+    QWidget* getCurrentViewWidget(void) { return _currentViewWidget; }
+
 public slots:
     /** @brief Show the application settings */
     void showSettings();