zhaohuwei
/
QG4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Update PX4 Firmware metadata Sun Feb 18 04:37:13 UTC 2018

QGC4.4
PX4 Jenkins 7 years ago committed by Daniel Agar
parent
c671b68dd4
commit
61cc29df3b
1 changed files with 123 additions and 28 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 151
      src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

151
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
Unescape View File

@ -3114,7 +3114,7 @@ but also ignore less noise</short_desc> @@ -3114,7 +3114,7 @@ but also ignore less noise</short_desc>
<min>0</min>
<max>300</max>
<unit>s</unit>
<scope>drivers/iridiumsbd</scope>
<scope>drivers/telemetry/iridiumsbd</scope>
</parameter>
</group>
<group name="Land Detector">
@ -3655,17 +3655,41 @@ Used to calculate increased terrain random walk nosie due to movement</short_des @@ -3655,17 +3655,41 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<reboot_required>true</reboot_required>
<scope>modules/mavlink</scope>
</parameter>
<parameter default="1" name="MAV_TEST_PAR" type="INT32">
<short_desc>Test parameter</short_desc>
<long_desc>This parameter is not actively used by the system. Its purpose is to allow testing the parameter interface on the communication level.</long_desc>
<min>-1000</min>
<max>1000</max>
<scope>modules/mavlink</scope>
</parameter>
<parameter default="2" name="MAV_TYPE" type="INT32">
<short_desc>MAVLink airframe type</short_desc>
<min>1</min>
<max>27</max>
<scope>modules/mavlink</scope>
<values>
<value code="0">Generic micro air vehicle</value>
<value code="1">Fixed wing aircraft</value>
<value code="2">Quadrotor</value>
<value code="3">Coaxial helicopter</value>
<value code="4">Normal helicopter with tail rotor</value>
<value code="5">Ground installation</value>
<value code="6">Operator control unit / ground control station</value>
<value code="7">Airship, controlled</value>
<value code="8">Free balloon, uncontrolled</value>
<value code="9">Rocket</value>
<value code="10">Ground rover</value>
<value code="11">Surface vessel, boat, ship</value>
<value code="12">Submarine</value>
<value code="13">Hexarotor</value>
<value code="14">Octorotor</value>
<value code="15">Tricopter</value>
<value code="16">Flapping wing</value>
<value code="17">Kite</value>
<value code="18">Onboard companion controller</value>
<value code="19">Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter.</value>
<value code="20">Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter.</value>
<value code="21">Tiltrotor VTOL</value>
<value code="22">VTOL reserved 2</value>
<value code="23">VTOL reserved 3</value>
<value code="24">VTOL reserved 4</value>
<value code="25">VTOL reserved 5</value>
<value code="26">Onboard gimbal</value>
<value code="27">Onboard ADSB peripheral</value>
</values>
</parameter>
<parameter default="0" name="MAV_USEHILGPS" type="INT32">
<short_desc>Use/Accept HIL GPS message even if not in HIL mode</short_desc>
@ -3930,6 +3954,15 @@ Used to calculate increased terrain random walk nosie due to movement</short_des @@ -3930,6 +3954,15 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<value code="6">Lockdown</value>
</values>
</parameter>
<parameter default="120.0" name="NAV_RCL_LT" type="FLOAT">
<short_desc>RC Loss Loiter Time (CASA Outback Challenge rules)</short_desc>
<long_desc>The amount of time in seconds the system should loiter at current position before termination. Only applies if NAV_RCL_ACT is set to 2 (CASA Outback Challenge rules). Set to -1 to make the system skip loitering.</long_desc>
<min>-1.0</min>
<unit>s</unit>
<decimal>1</decimal>
<increment>0.1</increment>
<scope>modules/navigator</scope>
</parameter>
<parameter default="1" name="NAV_TRAFF_AVOID" type="INT32">
<short_desc>Set traffic avoidance mode</short_desc>
<long_desc>Enabling this will allow the system to respond to transponder data from e.g. ADSB transponders</long_desc>
@ -4503,6 +4536,7 @@ the vehicle will accelerate at this rate until the normal position control speed @@ -4503,6 +4536,7 @@ the vehicle will accelerate at this rate until the normal position control speed
is 90 degrees. It should be lower than MPC_XY_CRUISE</short_desc>
<long_desc>Applies only in AUTO modes (includes also RTL / hold / etc.)</long_desc>
<min>1.0</min>
<max>20.0</max>
<unit>m/s</unit>
<decimal>2</decimal>
<increment>1</increment>
@ -5568,6 +5602,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5568,6 +5602,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC10_TRIM" type="FLOAT">
<short_desc>RC channel 10 trim</short_desc>
@ -5606,6 +5644,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5606,6 +5644,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC11_TRIM" type="FLOAT">
<short_desc>RC channel 11 trim</short_desc>
@ -5644,6 +5686,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5644,6 +5686,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC12_TRIM" type="FLOAT">
<short_desc>RC channel 12 trim</short_desc>
@ -5682,6 +5728,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5682,6 +5728,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC13_TRIM" type="FLOAT">
<short_desc>RC channel 13 trim</short_desc>
@ -5720,6 +5770,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5720,6 +5770,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC14_TRIM" type="FLOAT">
<short_desc>RC channel 14 trim</short_desc>
@ -5758,6 +5812,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5758,6 +5812,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC15_TRIM" type="FLOAT">
<short_desc>RC channel 15 trim</short_desc>
@ -5796,6 +5854,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5796,6 +5854,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC16_TRIM" type="FLOAT">
<short_desc>RC channel 16 trim</short_desc>
@ -5834,6 +5896,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5834,6 +5896,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC17_TRIM" type="FLOAT">
<short_desc>RC channel 17 trim</short_desc>
@ -5872,6 +5938,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5872,6 +5938,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC18_TRIM" type="FLOAT">
<short_desc>RC channel 18 trim</short_desc>
@ -5911,6 +5981,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5911,6 +5981,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500.0" name="RC1_TRIM" type="FLOAT">
<short_desc>RC channel 1 trim</short_desc>
@ -5950,6 +6024,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5950,6 +6024,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500.0" name="RC2_TRIM" type="FLOAT">
<short_desc>RC channel 2 trim</short_desc>
@ -5989,6 +6067,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -5989,6 +6067,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC3_TRIM" type="FLOAT">
<short_desc>RC channel 3 trim</short_desc>
@ -6028,6 +6110,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6028,6 +6110,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC4_TRIM" type="FLOAT">
<short_desc>RC channel 4 trim</short_desc>
@ -6066,6 +6152,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6066,6 +6152,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC5_TRIM" type="FLOAT">
<short_desc>RC channel 5 trim</short_desc>
@ -6104,6 +6194,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6104,6 +6194,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC6_TRIM" type="FLOAT">
<short_desc>RC channel 6 trim</short_desc>
@ -6142,6 +6236,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6142,6 +6236,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC7_TRIM" type="FLOAT">
<short_desc>RC channel 7 trim</short_desc>
@ -6180,6 +6278,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6180,6 +6278,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC8_TRIM" type="FLOAT">
<short_desc>RC channel 8 trim</short_desc>
@ -6218,6 +6320,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6218,6 +6320,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC9_TRIM" type="FLOAT">
<short_desc>RC channel 9 trim</short_desc>
@ -6243,14 +6349,14 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6243,14 +6349,14 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="10.0" name="RC_FLT_CUTOFF" type="FLOAT">
<short_desc>Cutoff frequency for the low pass filter on roll,pitch, yaw and throttle</short_desc>
<short_desc>Cutoff frequency for the low pass filter on roll, pitch, yaw and throttle</short_desc>
<long_desc>Does not get set unless below RC_FLT_SMP_RATE/2 because of filter instability characteristics.</long_desc>
<min>0.1</min>
<unit>Hz</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="50.0" name="RC_FLT_SMP_RATE" type="FLOAT">
<short_desc>Sample rate of the remote control values for the low pass filter on roll,pitch, yaw and throttle</short_desc>
<short_desc>Sample rate of the remote control values for the low pass filter on roll, pitch, yaw and throttle</short_desc>
<long_desc>Has an influence on the cutoff frequency precision.</long_desc>
<min>1.0</min>
<unit>Hz</unit>
@ -6688,17 +6794,6 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc> @@ -6688,17 +6794,6 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<scope>modules/commander</scope>
</parameter>
</group>
<group name="Radio Signal Loss">
<parameter default="120.0" name="NAV_RCL_LT" type="FLOAT">
<short_desc>Loiter Time</short_desc>
<long_desc>The amount of time in seconds the system should loiter at current position before termination Set to -1 to make the system skip loitering</long_desc>
<min>-1.0</min>
<unit>s</unit>
<decimal>1</decimal>
<increment>0.1</increment>
<scope>modules/navigator</scope>
</parameter>
</group>
<group name="Radio Switches">
<parameter default="0.5" name="RC_ACRO_TH" type="FLOAT">
<short_desc>Threshold for selecting acro mode</short_desc>
@ -8080,14 +8175,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -8080,14 +8175,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>LeddarOne rangefinder</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/leddar_one</scope>
</parameter>
<parameter default="0" name="SENS_EN_LL40LS" type="INT32">
<short_desc>Lidar-Lite (LL40LS)</short_desc>
<min>0</min>
<max>2</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/ll40ls</scope>
<values>
<value code="0">Disabled</value>
<value code="1">PWM</value>
@ -8098,14 +8193,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -8098,14 +8193,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>Maxbotix Soanr (mb12xx)</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/mb12xx</scope>
</parameter>
<parameter default="0" name="SENS_EN_SF0X" type="INT32">
<short_desc>Lightware laser rangefinder (serial)</short_desc>
<min>0</min>
<max>4</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/sf0x</scope>
<values>
<value code="0">Disabled</value>
<value code="1">SF02</value>
@ -8120,7 +8215,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -8120,7 +8215,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<min>0</min>
<max>5</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/sf1xx</scope>
<values>
<value code="0">Disabled</value>
<value code="1">SF10/a</value>
@ -8134,7 +8229,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -8134,7 +8229,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>Benewake TFmini laser rangefinder</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/tfmini</scope>
</parameter>
<parameter default="-1" name="SENS_EN_THERMAL" type="INT32">
<short_desc>Thermal control of sensor temperature</short_desc>
@ -8149,7 +8244,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -8149,7 +8244,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<min>0</min>
<max>3</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/teraranger</scope>
<values>
<value code="0">Disabled</value>
<value code="1">Autodetect</value>

Write Preview
Loading…
Cancel
Save