Merge pull request #6474 from DonLakeFlyer/Battery2Work

Battery2 work: Support in FactGroups and ArduPilot Power page

src/AutoPilotPlugins/APM/APMAirframeComponent.qml

@@ -83,8 +83,7 @@ SetupPage {
         id: newFramePageComponent
 
         Grid {
-            anchors.left:   parent.left
+            width:      availableWidth
-            anchors.right:  parent.right
             spacing:    _margins
             columns:    2
 

src/AutoPilotPlugins/APM/APMPowerComponent.qml

@@ -23,12 +23,22 @@ SetupPage {
     id:             powerPage
     pageComponent:  powerPageComponent
 
+    FactPanelController {
+        id:         controller
+        factPanel:  powerPage.viewPanel
+    }
+
     Component {
         id: powerPageComponent
 
         Column {
             spacing: _margins
 
+            QGCLabel { text: qsTr("Battery 1"); font.pointSize: ScreenTools.mediumFontPointSize }
+
+            Loader {
+                sourceComponent: powerSetupComponent
+
                 property Fact armVoltMin:       controller.getParameterFact(-1, "r.ARMING_VOLT_MIN")
                 property Fact battAmpPerVolt:   controller.getParameterFact(-1, "BATT_AMP_PERVOLT")
                 property Fact battCapacity:     controller.getParameterFact(-1, "BATT_CAPACITY")
@@ -36,9 +46,41 @@ SetupPage {
                 property Fact battMonitor:      controller.getParameterFact(-1, "BATT_MONITOR")
                 property Fact battVoltMult:     controller.getParameterFact(-1, "BATT_VOLT_MULT")
                 property Fact battVoltPin:      controller.getParameterFact(-1, "BATT_VOLT_PIN")
+                property Fact vehicleVoltage:   controller.vehicle.battery.voltage
+                property Fact vehicleCurrent:   controller.vehicle.battery.current
+            }
+
+            Item {
+                height: ScreenTools.defaultFontPixelHeight
+                width:  1
+            }
+
+            QGCLabel { text: qsTr("Battery 2"); font.pointSize: ScreenTools.mediumFontPointSize }
+
+            Loader {
+                sourceComponent: powerSetupComponent
+
+                property Fact armVoltMin:       controller.getParameterFact(-1, "r.ARMING_VOLT2_MIN")
+                property Fact battAmpPerVolt:   controller.getParameterFact(-1, "BATT2_AMP_PERVOL")
+                property Fact battCapacity:     controller.getParameterFact(-1, "BATT2_CAPACITY")
+                property Fact battCurrPin:      controller.getParameterFact(-1, "BATT2_CURR_PIN")
+                property Fact battMonitor:      controller.getParameterFact(-1, "BATT2_MONITOR")
+                property Fact battVoltMult:     controller.getParameterFact(-1, "BATT2_VOLT_MULT")
+                property Fact battVoltPin:      controller.getParameterFact(-1, "BATT2_VOLT_PIN")
+                property Fact vehicleVoltage:   controller.vehicle.battery2.voltage
+                property Fact vehicleCurrent:   controller.vehicle.battery2.current
+            }
+        }
+    } // Component - powerPageComponent
+
+    Component {
+        id: powerSetupComponent
+
+        Column {
+            spacing: _margins
 
             property real _margins:         ScreenTools.defaultFontPixelHeight / 2
-            property bool _showAdvanced:    sensorCombo.currentIndex == sensorModel.count - 1
+            property bool _showAdvanced:    sensorCombo.currentIndex === sensorModel.count - 1
             property real _fieldWidth:      ScreenTools.defaultFontPixelWidth * 25
 
             Component.onCompleted: calcSensor()
@@ -58,11 +100,6 @@ SetupPage {
 
             QGCPalette { id: palette; colorGroupEnabled: true }
 
-            FactPanelController {
-                id:         controller
-                factPanel:  powerPage.viewPanel
-            }
-
             ListModel {
                 id: sensorModel
 
@@ -95,121 +132,6 @@ SetupPage {
                 }
             }
 
-            Component {
-                id: calcVoltageMultiplierDlgComponent
-
-                QGCViewDialog {
-                    id: calcVoltageMultiplierDlg
-
-                    QGCFlickable {
-                        anchors.fill:   parent
-                        contentHeight:  column.height
-                        contentWidth:   column.width
-
-                        Column {
-                            id:         column
-                            width:      calcVoltageMultiplierDlg.width
-                            spacing:    ScreenTools.defaultFontPixelHeight
-
-                            QGCLabel {
-                                width:      parent.width
-                                wrapMode:   Text.WordWrap
-                                text:       qsTr("Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier.")
-                            }
-
-                            Grid {
-                                columns: 2
-                                spacing: ScreenTools.defaultFontPixelHeight / 2
-                                verticalItemAlignment: Grid.AlignVCenter
-
-                                QGCLabel {
-                                    text: qsTr("Measured voltage:")
-                                }
-                                QGCTextField { id: measuredVoltage }
-
-                                QGCLabel { text: qsTr("Vehicle voltage:") }
-                                QGCLabel { text: controller.vehicle.battery.voltage.valueString }
-
-                                QGCLabel { text: qsTr("Voltage multiplier:") }
-                                FactLabel { fact: battVoltMult }
-                            }
-
-                            QGCButton {
-                                text: "Calculate"
-
-                                onClicked:  {
-                                    var measuredVoltageValue = parseFloat(measuredVoltage.text)
-                                    if (measuredVoltageValue == 0 || isNaN(measuredVoltageValue)) {
-                                        return
-                                    }
-                                    var newVoltageMultiplier = (measuredVoltageValue * battVoltMult.value) / controller.vehicle.battery.voltage.value
-                                    if (newVoltageMultiplier > 0) {
-                                        battVoltMult.value = newVoltageMultiplier
-                                    }
-                                }
-                            }
-                        } // Column
-                    } // QGCFlickable
-                } // QGCViewDialog
-            } // Component - calcVoltageMultiplierDlgComponent
-
-            Component {
-                id: calcAmpsPerVoltDlgComponent
-
-                QGCViewDialog {
-                    id: calcAmpsPerVoltDlg
-
-                    QGCFlickable {
-                        anchors.fill:   parent
-                        contentHeight:  column.height
-                        contentWidth:   column.width
-
-                        Column {
-                            id:         column
-                            width:      calcAmpsPerVoltDlg.width
-                            spacing:    ScreenTools.defaultFontPixelHeight
-
-                            QGCLabel {
-                                width:      parent.width
-                                wrapMode:   Text.WordWrap
-                                text:       qsTr("Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.")
-                            }
-
-                            Grid {
-                                columns: 2
-                                spacing: ScreenTools.defaultFontPixelHeight / 2
-                                verticalItemAlignment: Grid.AlignVCenter
-
-                                QGCLabel {
-                                    text: qsTr("Measured current:")
-                                }
-                                QGCTextField { id: measuredCurrent }
-
-                                QGCLabel { text: qsTr("Vehicle current:") }
-                                QGCLabel { text: controller.vehicle.battery.current.valueString }
-
-                                QGCLabel { text: qsTr("Amps per volt:") }
-                                FactLabel { fact: battAmpPerVolt }
-                            }
-
-                            QGCButton {
-                                text: "Calculate"
-
-                                onClicked:  {
-                                    var measuredCurrentValue = parseFloat(measuredCurrent.text)
-                                    if (measuredCurrentValue == 0) {
-                                        return
-                                    }
-                                    var newAmpsPerVolt = (measuredCurrentValue * battAmpPerVolt.value) / controller.vehicle.battery.current.value
-                                    if (newAmpsPerVolt != 0) {
-                                        battAmpPerVolt.value = newAmpsPerVolt
-                                    }
-                                }
-                            }
-                        } // Column
-                    } // QGCFlickable
-                } // QGCViewDialog
-            } // Component - calcAmpsPerVoltDlgComponent
 
             GridLayout {
                 columns:        3
@@ -355,5 +277,121 @@ SetupPage {
                 }
             } // GridLayout
         } // Column
-    } // Component
+    } // Component - powerSetupComponent
+
+    Component {
+        id: calcVoltageMultiplierDlgComponent
+
+        QGCViewDialog {
+            id: calcVoltageMultiplierDlg
+
+            QGCFlickable {
+                anchors.fill:   parent
+                contentHeight:  column.height
+                contentWidth:   column.width
+
+                Column {
+                    id:         column
+                    width:      calcVoltageMultiplierDlg.width
+                    spacing:    ScreenTools.defaultFontPixelHeight
+
+                    QGCLabel {
+                        width:      parent.width
+                        wrapMode:   Text.WordWrap
+                        text:       qsTr("Measure battery voltage using an external voltmeter and enter the value below. Click Calculate to set the new voltage multiplier.")
+                    }
+
+                    Grid {
+                        columns: 2
+                        spacing: ScreenTools.defaultFontPixelHeight / 2
+                        verticalItemAlignment: Grid.AlignVCenter
+
+                        QGCLabel {
+                            text: qsTr("Measured voltage:")
+                        }
+                        QGCTextField { id: measuredVoltage }
+
+                        QGCLabel { text: qsTr("Vehicle voltage:") }
+                        QGCLabel { text: vehicleVoltage.valueString }
+
+                        QGCLabel { text: qsTr("Voltage multiplier:") }
+                        FactLabel { fact: battVoltMult }
+                    }
+
+                    QGCButton {
+                        text: "Calculate"
+
+                        onClicked:  {
+                            var measuredVoltageValue = parseFloat(measuredVoltage.text)
+                            if (measuredVoltageValue == 0 || isNaN(measuredVoltageValue)) {
+                                return
+                            }
+                            var newVoltageMultiplier = (measuredVoltageValue * battVoltMult.value) / vehicleVoltage.value
+                            if (newVoltageMultiplier > 0) {
+                                battVoltMult.value = newVoltageMultiplier
+                            }
+                        }
+                    }
+                } // Column
+            } // QGCFlickable
+        } // QGCViewDialog
+    } // Component - calcVoltageMultiplierDlgComponent
+
+    Component {
+        id: calcAmpsPerVoltDlgComponent
+
+        QGCViewDialog {
+            id: calcAmpsPerVoltDlg
+
+            QGCFlickable {
+                anchors.fill:   parent
+                contentHeight:  column.height
+                contentWidth:   column.width
+
+                Column {
+                    id:         column
+                    width:      calcAmpsPerVoltDlg.width
+                    spacing:    ScreenTools.defaultFontPixelHeight
+
+                    QGCLabel {
+                        width:      parent.width
+                        wrapMode:   Text.WordWrap
+                        text:       qsTr("Measure current draw using an external current meter and enter the value below. Click Calculate to set the new amps per volt value.")
+                    }
+
+                    Grid {
+                        columns: 2
+                        spacing: ScreenTools.defaultFontPixelHeight / 2
+                        verticalItemAlignment: Grid.AlignVCenter
+
+                        QGCLabel {
+                            text: qsTr("Measured current:")
+                        }
+                        QGCTextField { id: measuredCurrent }
+
+                        QGCLabel { text: qsTr("Vehicle current:") }
+                        QGCLabel { text: vehicleCurrent.valueString }
+
+                        QGCLabel { text: qsTr("Amps per volt:") }
+                        FactLabel { fact: battAmpPerVolt }
+                    }
+
+                    QGCButton {
+                        text: "Calculate"
+
+                        onClicked:  {
+                            var measuredCurrentValue = parseFloat(measuredCurrent.text)
+                            if (measuredCurrentValue == 0) {
+                                return
+                            }
+                            var newAmpsPerVolt = (measuredCurrentValue * battAmpPerVolt.value) / vehicleCurrent.value
+                            if (newAmpsPerVolt != 0) {
+                                battAmpPerVolt.value = newAmpsPerVolt
+                            }
+                        }
+                    }
+                } // Column
+            } // QGCFlickable
+        } // QGCViewDialog
+    } // Component - calcAmpsPerVoltDlgComponent
 } // SetupPage

src/Vehicle/Vehicle.cc

@@ -69,7 +69,8 @@ const char* Vehicle::_distanceToHomeFactName =      "distanceToHome";
 const char* Vehicle::_hobbsFactName =               "hobbs";
 
 const char* Vehicle::_gpsFactGroupName =            "gps";
-const char* Vehicle::_batteryFactGroupName =        "battery";
+const char* Vehicle::_battery1FactGroupName =       "battery";
+const char* Vehicle::_battery2FactGroupName =       "battery2";
 const char* Vehicle::_windFactGroupName =           "wind";
 const char* Vehicle::_vibrationFactGroupName =      "vibration";
 const char* Vehicle::_temperatureFactGroupName =    "temperature";
@@ -185,7 +186,8 @@ Vehicle::Vehicle(LinkInterface*             link,
     , _distanceToHomeFact   (0, _distanceToHomeFactName,    FactMetaData::valueTypeDouble)
     , _hobbsFact            (0, _hobbsFactName,             FactMetaData::valueTypeString)
     , _gpsFactGroup(this)
-    , _batteryFactGroup(this)
+    , _battery1FactGroup(this)
+    , _battery2FactGroup(this)
     , _windFactGroup(this)
     , _vibrationFactGroup(this)
     , _temperatureFactGroup(this)
@@ -370,7 +372,8 @@ Vehicle::Vehicle(MAV_AUTOPILOT              firmwareType,
     , _distanceToHomeFact   (0, _distanceToHomeFactName,    FactMetaData::valueTypeDouble)
     , _hobbsFact            (0, _hobbsFactName,             FactMetaData::valueTypeString)
     , _gpsFactGroup(this)
-    , _batteryFactGroup(this)
+    , _battery1FactGroup(this)
+    , _battery2FactGroup(this)
     , _windFactGroup(this)
     , _vibrationFactGroup(this)
     , _clockFactGroup(this)
@@ -440,7 +443,8 @@ void Vehicle::_commonInit(void)
     _addFact(&_hobbsFact,               _hobbsFactName);
 
     _addFactGroup(&_gpsFactGroup,               _gpsFactGroupName);
-    _addFactGroup(&_batteryFactGroup,           _batteryFactGroupName);
+    _addFactGroup(&_battery1FactGroup,          _battery1FactGroupName);
+    _addFactGroup(&_battery2FactGroup,          _battery2FactGroupName);
     _addFactGroup(&_windFactGroup,              _windFactGroupName);
     _addFactGroup(&_vibrationFactGroup,         _vibrationFactGroupName);
     _addFactGroup(&_temperatureFactGroup,       _temperatureFactGroupName);
@@ -940,7 +944,7 @@ void Vehicle::_handleHighLatency2(mavlink_message_t& message)
     _windFactGroup.direction()->setRawValue((double)highLatency2.wind_heading * 2.0);
     _windFactGroup.speed()->setRawValue((double)highLatency2.windspeed / 5.0);
 
-    _batteryFactGroup.percentRemaining()->setRawValue(highLatency2.battery);
+    _battery1FactGroup.percentRemaining()->setRawValue(highLatency2.battery);
 
     _temperatureFactGroup.temperature1()->setRawValue(highLatency2.temperature_air);
 
@@ -1245,19 +1249,19 @@ void Vehicle::_handleSysStatus(mavlink_message_t& message)
     mavlink_msg_sys_status_decode(&message, &sysStatus);
 
     if (sysStatus.current_battery == -1) {
-        _batteryFactGroup.current()->setRawValue(VehicleBatteryFactGroup::_currentUnavailable);
+        _battery1FactGroup.current()->setRawValue(VehicleBatteryFactGroup::_currentUnavailable);
     } else {
         // Current is in Amps, current_battery is 10 * milliamperes (1 = 10 milliampere)
-        _batteryFactGroup.current()->setRawValue((float)sysStatus.current_battery / 100.0f);
+        _battery1FactGroup.current()->setRawValue((float)sysStatus.current_battery / 100.0f);
     }
     if (sysStatus.voltage_battery == UINT16_MAX) {
-        _batteryFactGroup.voltage()->setRawValue(VehicleBatteryFactGroup::_voltageUnavailable);
+        _battery1FactGroup.voltage()->setRawValue(VehicleBatteryFactGroup::_voltageUnavailable);
     } else {
-        _batteryFactGroup.voltage()->setRawValue((double)sysStatus.voltage_battery / 1000.0);
+        _battery1FactGroup.voltage()->setRawValue((double)sysStatus.voltage_battery / 1000.0);
         // current_battery is 10 mA and voltage_battery is 1mV. (10/1e3 times 1/1e3 = 1/1e5)
-        _batteryFactGroup.instantPower()->setRawValue((float)(sysStatus.current_battery*sysStatus.voltage_battery)/(100000.0));
+        _battery1FactGroup.instantPower()->setRawValue((float)(sysStatus.current_battery*sysStatus.voltage_battery)/(100000.0));
     }
-    _batteryFactGroup.percentRemaining()->setRawValue(sysStatus.battery_remaining);
+    _battery1FactGroup.percentRemaining()->setRawValue(sysStatus.battery_remaining);
 
     if (sysStatus.battery_remaining > 0) {
         if (sysStatus.battery_remaining < _settingsManager->appSettings()->batteryPercentRemainingAnnounce()->rawValue().toInt() &&
@@ -1300,15 +1304,17 @@ void Vehicle::_handleBatteryStatus(mavlink_message_t& message)
     mavlink_battery_status_t bat_status;
     mavlink_msg_battery_status_decode(&message, &bat_status);
 
+    VehicleBatteryFactGroup& batteryFactGroup = bat_status.id == 0 ? _battery1FactGroup : _battery2FactGroup;
+
     if (bat_status.temperature == INT16_MAX) {
-        _batteryFactGroup.temperature()->setRawValue(VehicleBatteryFactGroup::_temperatureUnavailable);
+        batteryFactGroup.temperature()->setRawValue(VehicleBatteryFactGroup::_temperatureUnavailable);
     } else {
-        _batteryFactGroup.temperature()->setRawValue((double)bat_status.temperature / 100.0);
+        batteryFactGroup.temperature()->setRawValue((double)bat_status.temperature / 100.0);
     }
     if (bat_status.current_consumed == -1) {
-        _batteryFactGroup.mahConsumed()->setRawValue(VehicleBatteryFactGroup::_mahConsumedUnavailable);
+        batteryFactGroup.mahConsumed()->setRawValue(VehicleBatteryFactGroup::_mahConsumedUnavailable);
     } else {
-        _batteryFactGroup.mahConsumed()->setRawValue(bat_status.current_consumed);
+        batteryFactGroup.mahConsumed()->setRawValue(bat_status.current_consumed);
     }
 
     int cellCount = 0;
@@ -1321,15 +1327,15 @@ void Vehicle::_handleBatteryStatus(mavlink_message_t& message)
         cellCount = -1;
     }
 
-    _batteryFactGroup.cellCount()->setRawValue(cellCount);
+    batteryFactGroup.cellCount()->setRawValue(cellCount);
 
     //-- Time remaining in seconds (0 means not supported)
-    _batteryFactGroup.timeRemaining()->setRawValue(bat_status.time_remaining);
+    batteryFactGroup.timeRemaining()->setRawValue(bat_status.time_remaining);
     //-- Battery charge state (0 means not supported)
     if(bat_status.charge_state <= MAV_BATTERY_CHARGE_STATE_UNHEALTHY) {
-        _batteryFactGroup.chargeState()->setRawValue(bat_status.charge_state);
+        batteryFactGroup.chargeState()->setRawValue(bat_status.charge_state);
     } else {
-        _batteryFactGroup.chargeState()->setRawValue(0);
+        batteryFactGroup.chargeState()->setRawValue(0);
     }
     //-- TODO: Somewhere, actions would be taken based on this chargeState:
     //   MAV_BATTERY_CHARGE_STATE_CRITICAL:     Battery state is critical, return / abort immediately

src/Vehicle/Vehicle.h

@@ -526,7 +526,8 @@ public:
     Q_PROPERTY(Fact* hobbs              READ hobbs              CONSTANT)
 
     Q_PROPERTY(FactGroup* gps         READ gpsFactGroup         CONSTANT)
-    Q_PROPERTY(FactGroup* battery     READ batteryFactGroup     CONSTANT)
+    Q_PROPERTY(FactGroup* battery     READ battery1FactGroup    CONSTANT)
+    Q_PROPERTY(FactGroup* battery2    READ battery2FactGroup    CONSTANT)
     Q_PROPERTY(FactGroup* wind        READ windFactGroup        CONSTANT)
     Q_PROPERTY(FactGroup* vibration   READ vibrationFactGroup   CONSTANT)
     Q_PROPERTY(FactGroup* temperature READ temperatureFactGroup CONSTANT)
@@ -816,7 +817,8 @@ public:
     Fact* hobbs             (void) { return &_hobbsFact; }
 
     FactGroup* gpsFactGroup             (void) { return &_gpsFactGroup; }
-    FactGroup* batteryFactGroup         (void) { return &_batteryFactGroup; }
+    FactGroup* battery1FactGroup        (void) { return &_battery1FactGroup; }
+    FactGroup* battery2FactGroup        (void) { return &_battery2FactGroup; }
     FactGroup* windFactGroup            (void) { return &_windFactGroup; }
     FactGroup* vibrationFactGroup       (void) { return &_vibrationFactGroup; }
     FactGroup* temperatureFactGroup     (void) { return &_temperatureFactGroup; }
@@ -1294,7 +1296,8 @@ private:
     Fact _hobbsFact;
 
     VehicleGPSFactGroup             _gpsFactGroup;
-    VehicleBatteryFactGroup         _batteryFactGroup;
+    VehicleBatteryFactGroup         _battery1FactGroup;
+    VehicleBatteryFactGroup         _battery2FactGroup;
     VehicleWindFactGroup            _windFactGroup;
     VehicleVibrationFactGroup       _vibrationFactGroup;
     VehicleTemperatureFactGroup     _temperatureFactGroup;
@@ -1319,7 +1322,8 @@ private:
     static const char* _hobbsFactName;
 
     static const char* _gpsFactGroupName;
-    static const char* _batteryFactGroupName;
+    static const char* _battery1FactGroupName;
+    static const char* _battery2FactGroupName;
     static const char* _windFactGroupName;
     static const char* _vibrationFactGroupName;
     static const char* _temperatureFactGroupName;