Merge branch 'master' of https://github.com/mavlink/qgroundcontrol into restyling

src/uas/UASWaypointManager.cc

@@ -38,7 +38,7 @@ This file is part of the QGROUNDCONTROL project
 #define PROTOCOL_TIMEOUT_MS 2000    ///< maximum time to wait for pending messages until timeout
 #define PROTOCOL_DELAY_MS 20        ///< minimum delay between sent messages
 #define PROTOCOL_MAX_RETRIES 5      ///< maximum number of send retries (after timeout)
-
+const float UASWaypointManager::defaultAltitudeHomeOffset   = 30.0f;
 UASWaypointManager::UASWaypointManager(UAS* _uas)
     : uas(_uas),
       current_retries(0),

src/uas/UASWaypointManager.h

@@ -180,7 +180,7 @@ private:
     quint16 uasid;
 
     // XXX export to settings
-    static const float defaultAltitudeHomeOffset   = 30.0f;    ///< Altitude offset in meters from home for new waypoints
+    static const float defaultAltitudeHomeOffset;    ///< Altitude offset in meters from home for new waypoints
 };
 
 #endif // UASWAYPOINTMANAGER_H

src/ui/QGCToolBar.cc

@@ -168,6 +168,7 @@ void QGCToolBar::createUI()
         addLink(LinkManager::instance()->getLinks().last());
     // XXX implies that connect button is always active for the last used link
     connect(LinkManager::instance(), SIGNAL(newLink(LinkInterface*)), this, SLOT(addLink(LinkInterface*)));
+    connect(LinkManager::instance(), SIGNAL(linkRemoved(LinkInterface*)), this, SLOT(removeLink(LinkInterface*)));
 
     // Update label if required
     if (LinkManager::instance()->getLinks().count() < 3) {

src/ui/QGCVehicleConfig.cc

@@ -52,7 +52,7 @@ QGCVehicleConfig::QGCVehicleConfig(QWidget *parent) :
 
     ui->rcCalibrationButton->setCheckable(true);
     connect(ui->rcCalibrationButton, SIGNAL(clicked(bool)), this, SLOT(toggleCalibrationRC(bool)));
-    connect(ui->storeButton, SIGNAL(clicked()), this, SLOT(writeParameters()));
+    connect(ui->setButton, SIGNAL(clicked()), this, SLOT(writeParameters()));
     connect(ui->rcModeComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(setRCModeIndex(int)));
     connect(ui->setTrimButton, SIGNAL(clicked()), this, SLOT(setTrimPositions()));
 
@@ -174,6 +174,7 @@ void QGCVehicleConfig::stopCalibrationRC()
 
 void QGCVehicleConfig::loadQgcConfig(bool primary)
 {
+    Q_UNUSED(primary);
     QDir autopilotdir(qApp->applicationDirPath() + "/files/" + mav->getAutopilotTypeName().toLower());
     QDir generaldir = QDir(autopilotdir.absolutePath() + "/general/widgets");
     QDir vehicledir = QDir(autopilotdir.absolutePath() + "/" + mav->getSystemTypeName().toLower() + "/widgets");
@@ -321,7 +322,6 @@ void QGCVehicleConfig::loadQgcConfig(bool primary)
         }
     }
 
-
     // Load calibration
     //TODO: Handle this more gracefully, maybe have it scan the directory for multiple calibration entries?
     tool = new QGCToolWidget("", this);
@@ -338,7 +338,6 @@ void QGCVehicleConfig::loadQgcConfig(bool primary)
         delete tool;
     }
 
-
     tool = new QGCToolWidget("", this);
     tool->addUAS(mav);
     if (tool->loadSettings(autopilotdir.absolutePath() + "/" +  mav->getSystemTypeName().toLower() + "/calibration/calibration.qgw", false))
@@ -352,16 +351,12 @@ void QGCVehicleConfig::loadQgcConfig(bool primary)
     } else {
         delete tool;
     }
+
     //description.txt
     QFile sensortipsfile(autopilotdir.absolutePath() + "/general/calibration/description.txt");
     sensortipsfile.open(QIODevice::ReadOnly);
     ui->sensorTips->setHtml(sensortipsfile.readAll());
     sensortipsfile.close();
-
-
-
-
-
 }
 
 void QGCVehicleConfig::loadConfig()
@@ -679,10 +674,8 @@ void QGCVehicleConfig::loadConfig()
         }
         xml.readNext();
     }
-    if (mav)
+
-    {
+    mav->getParamManager()->setParamInfo(paramTooltips);
-           mav->getParamManager()->setParamInfo(paramTooltips);
-    }
     doneLoadingConfig = true;
     mav->requestParameters(); //Config is finished, lets do a parameter request to ensure none are missed if someone else started requesting before we were finished.
 }
@@ -736,18 +729,24 @@ void QGCVehicleConfig::setActiveUAS(UASInterface* active)
            mav->getParamManager()->setParamInfo(paramTooltips);
     }
 
-   //    mav->requestParameters();
-
-    QString defaultsDir = qApp->applicationDirPath() + "/files/" + mav->getAutopilotTypeName().toLower() + "/widgets/";
     qDebug() << "CALIBRATION!! System Type Name:" << mav->getSystemTypeName();
 
-
     //Load configuration after 1ms. This allows it to go into the event loop, and prevents application hangups due to the
     //amount of time it actually takes to load the configuration windows.
     QTimer::singleShot(1,this,SLOT(loadConfig()));
 
     updateStatus(QString("Reading from system %1").arg(mav->getUASName()));
+
+    // Since a system is now connected, enable the VehicleConfig UI.
+    ui->tabWidget->setEnabled(true);
+    ui->setButton->setEnabled(true);
+    ui->refreshButton->setEnabled(true);
+    ui->readButton->setEnabled(true);
+    ui->writeButton->setEnabled(true);
+    ui->loadFileButton->setEnabled(true);
+    ui->saveFileButton->setEnabled(true);
 }
+
 void QGCVehicleConfig::resetCalibrationRC()
 {
     for (unsigned int i = 0; i < chanMax; ++i)
@@ -1065,9 +1064,9 @@ void QGCVehicleConfig::parameterChanged(int uas, int component, QString paramete
 
     if (minTpl.exactMatch(parameterName)) {
         bool ok;
-        int index = parameterName.mid(2, 1).toInt(&ok) - 1;
+        unsigned int index = parameterName.mid(2, 1).toInt(&ok) - 1;
         //qDebug() << "PARAM:" << parameterName << "index:" << index;
-        if (ok && (index >= 0) && (index < chanMax))
+        if (ok && index < chanMax)
         {
             rcMin[index] = value.toInt();
         }
@@ -1075,8 +1074,8 @@ void QGCVehicleConfig::parameterChanged(int uas, int component, QString paramete
 
     if (maxTpl.exactMatch(parameterName)) {
         bool ok;
-        int index = parameterName.mid(2, 1).toInt(&ok) - 1;
+        unsigned int index = parameterName.mid(2, 1).toInt(&ok) - 1;
-        if (ok && (index >= 0) && (index < chanMax))
+        if (ok && index < chanMax)
         {
             rcMax[index] = value.toInt();
         }
@@ -1084,8 +1083,8 @@ void QGCVehicleConfig::parameterChanged(int uas, int component, QString paramete
 
     if (trimTpl.exactMatch(parameterName)) {
         bool ok;
-        int index = parameterName.mid(2, 1).toInt(&ok) - 1;
+        unsigned int index = parameterName.mid(2, 1).toInt(&ok) - 1;
-        if (ok && (index >= 0) && (index < chanMax))
+        if (ok && index < chanMax)
         {
             rcTrim[index] = value.toInt();
         }
@@ -1093,8 +1092,8 @@ void QGCVehicleConfig::parameterChanged(int uas, int component, QString paramete
 
     if (revTpl.exactMatch(parameterName)) {
         bool ok;
-        int index = parameterName.mid(2, 1).toInt(&ok) - 1;
+        unsigned int index = parameterName.mid(2, 1).toInt(&ok) - 1;
-        if (ok && (index >= 0) && (index < chanMax))
+        if (ok && index < chanMax)
         {
             rcRev[index] = (value.toInt() == -1) ? true : false;
             updateInvertedCheckboxes(index);

src/ui/WaypointList.cc

@@ -130,6 +130,11 @@ WaypointList::WaypointList(QWidget *parent, UASWaypointManager* wpm) :
         connect(WPM, SIGNAL(waypointViewOnlyListChanged(void)),                  this, SLOT(waypointViewOnlyListChanged(void)));
         connect(WPM, SIGNAL(waypointViewOnlyChanged(int,Waypoint*)), this, SLOT(updateWaypointViewOnly(int,Waypoint*)));
         connect(WPM, SIGNAL(currentWaypointChanged(quint16)),            this, SLOT(currentWaypointViewOnlyChanged(quint16)));
+
+        //Even if there are no waypoints, since this is a new instance and there is an
+        //existing WPM, then we need to assume things have changed, and act appropriatly.
+        waypointEditableListChanged();
+        waypointViewOnlyListChanged();
     }
 
     // STATUS LABEL

src/ui/dockwidgettitlebareventfilter.cpp

@@ -6,7 +6,6 @@ DockWidgetTitleBarEventFilter::DockWidgetTitleBarEventFilter(QObject *parent) :
 }
 bool DockWidgetTitleBarEventFilter::eventFilter(QObject *object,QEvent *event)
 {
-    qDebug() << event->type();
     if (event->type() == QEvent::MouseButtonPress || event->type() == QEvent::MouseButtonRelease)
     {
         return true;

src/ui/map/QGCMapWidget.cc

@@ -212,7 +212,11 @@ void QGCMapWidget::loadSettings(bool changePosition)
     if (trailType == mapcontrol::UAVTrailType::ByDistance)
     {
         // XXX
+#ifdef Q_OS_WIN
+#pragma message ("WARNING: Settings loading for trail type not implemented")
+#else
 #warning Settings loading for trail type not implemented
+#endif
     }
     else if (trailType == mapcontrol::UAVTrailType::ByTimeElapsed)
     {