zhaohuwei
/
QG4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

New param meta data

QGC4.4
Don Gagne 9 years ago
parent
620c37f4f8
commit
cfef44f7b5
1 changed files with 364 additions and 165 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 529
      src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml

529
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
Unescape View File

@ -2,7 +2,8 @@ @@ -2,7 +2,8 @@
<parameters>
<version>3</version>
<parameter_version_major>1</parameter_version_major>
<parameter_version_minor>1</parameter_version_minor> <group name="UAVCAN Motor Parameters" no_code_generation="true">
<parameter_version_minor>3</parameter_version_minor>
<group name="UAVCAN Motor Parameters" no_code_generation="true">
<parameter default="75" name="ctl_bw" type="INT32">
<short_desc>Speed controller bandwidth</short_desc>
<long_desc>Speed controller bandwidth, in Hz. Higher values result in faster speed and current rise times, but may result in overshoot and higher current consumption. For fixed-wing aircraft, this value should be less than 50 Hz; for multirotors, values up to 100 Hz may provide improvements in responsiveness.</long_desc>
@ -303,9 +304,11 @@ velocity</short_desc> @@ -303,9 +304,11 @@ velocity</short_desc>
</parameter>
<parameter default="-1.0" name="BAT_V_SCALING" type="FLOAT">
<short_desc>Scaling factor for battery voltage sensor on FMU v2</short_desc>
<decimal>8</decimal>
</parameter>
<parameter default="-1.0" name="BAT_C_SCALING" type="FLOAT">
<short_desc>Scaling factor for battery current sensor</short_desc>
<decimal>8</decimal>
</parameter>
</group>
<group name="Camera trigger">
@ -3344,10 +3347,18 @@ replay messages for logging</short_desc> @@ -3344,10 +3347,18 @@ replay messages for logging</short_desc>
<short_desc>Enable relay control of relay 1 mapped to the Spektrum receiver power supply</short_desc>
<min>0</min>
<max>1</max>
<values>
<value code="1">Relay controls DSM power</value>
<value code="0">Disabled</value>
</values>
</parameter>
<parameter default="-1" name="RC_DSM_BIND" type="INT32">
<short_desc>DSM binding trigger</short_desc>
<long_desc>-1 = Idle, 0 = Start DSM2 bind, 1 = Start DSMX bind</long_desc>
<values>
<value code="1">Start DSMX bind</value>
<value code="0">Start DSM2 bind</value>
<value code="-1">Inactive</value>
</values>
</parameter>
<parameter default="0" name="RC_CHAN_CNT" type="INT32">
<short_desc>RC channel count</short_desc>
@ -3386,7 +3397,7 @@ replay messages for logging</short_desc> @@ -3386,7 +3397,7 @@ replay messages for logging</short_desc>
<max>18</max>
</parameter>
<parameter default="0" name="RC_MAP_AUX1" type="INT32">
<short_desc>Auxiliary switch 1 channel mapping</short_desc>
<short_desc>AUX1 channel</short_desc>
<long_desc>Default function: Camera pitch</long_desc>
<min>0</min>
<max>18</max>
@ -3400,20 +3411,20 @@ replay messages for logging</short_desc> @@ -3400,20 +3411,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_AUX2" type="INT32">
<short_desc>Auxiliary switch 2 channel mapping</short_desc>
<short_desc>AUX2 channel</short_desc>
<long_desc>Default function: Camera roll</long_desc>
<min>0</min>
<max>18</max>
@ -3427,20 +3438,20 @@ replay messages for logging</short_desc> @@ -3427,20 +3438,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_AUX3" type="INT32">
<short_desc>Auxiliary switch 3 channel mapping</short_desc>
<short_desc>AUX3 Channel</short_desc>
<long_desc>Default function: Camera azimuth / yaw</long_desc>
<min>0</min>
<max>18</max>
@ -3454,20 +3465,20 @@ replay messages for logging</short_desc> @@ -3454,20 +3465,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_PARAM1" type="INT32">
<short_desc>Channel which changes a parameter</short_desc>
<short_desc>PARAM1 tuning channel</short_desc>
<long_desc>Can be used for parameter tuning with the RC. This one is further referenced as the 1st parameter channel. Set to 0 to deactivate *</long_desc>
<min>0</min>
<max>18</max>
@ -3481,20 +3492,20 @@ replay messages for logging</short_desc> @@ -3481,20 +3492,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_PARAM2" type="INT32">
<short_desc>Channel which changes a parameter</short_desc>
<short_desc>PARAM2 tuning channel</short_desc>
<long_desc>Can be used for parameter tuning with the RC. This one is further referenced as the 2nd parameter channel. Set to 0 to deactivate *</long_desc>
<min>0</min>
<max>18</max>
@ -3508,20 +3519,20 @@ replay messages for logging</short_desc> @@ -3508,20 +3519,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_PARAM3" type="INT32">
<short_desc>Channel which changes a parameter</short_desc>
<short_desc>PARAM3 tuning channel</short_desc>
<long_desc>Can be used for parameter tuning with the RC. This one is further referenced as the 3th parameter channel. Set to 0 to deactivate *</long_desc>
<min>0</min>
<max>18</max>
@ -3535,16 +3546,16 @@ replay messages for logging</short_desc> @@ -3535,16 +3546,16 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_FAILS_THR" type="INT32">
@ -3559,6 +3570,27 @@ replay messages for logging</short_desc> @@ -3559,6 +3570,27 @@ replay messages for logging</short_desc>
<long_desc>0: do not read RSSI from input channel 1-18: read RSSI from specified input channel Specify the range for RSSI input with RC_RSSI_PWM_MIN and RC_RSSI_PWM_MAX parameters.</long_desc>
<min>0</min>
<max>18</max>
<values>
<value code="11">RC Channel 11</value>
<value code="10">RC Channel 10</value>
<value code="13">RC Channel 13</value>
<value code="12">RC Channel 12</value>
<value code="15">RC Channel 15</value>
<value code="14">RC Channel 14</value>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="1000" name="RC_RSSI_PWM_MAX" type="INT32">
<short_desc>Max input value for RSSI reading</short_desc>
@ -3597,16 +3629,16 @@ replay messages for logging</short_desc> @@ -3597,16 +3629,16 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_MODE_SW" type="INT32">
@ -3624,20 +3656,20 @@ replay messages for logging</short_desc> @@ -3624,20 +3656,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_RETURN_SW" type="INT32">
<short_desc>Return switch channel mapping</short_desc>
<short_desc>Return switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3650,20 +3682,20 @@ replay messages for logging</short_desc> @@ -3650,20 +3682,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_RATT_SW" type="INT32">
<short_desc>Rattitude switch channel mapping</short_desc>
<short_desc>Rattitude switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3676,20 +3708,20 @@ replay messages for logging</short_desc> @@ -3676,20 +3708,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_POSCTL_SW" type="INT32">
<short_desc>Posctl switch channel mapping</short_desc>
<short_desc>Position Control switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3702,20 +3734,20 @@ replay messages for logging</short_desc> @@ -3702,20 +3734,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_LOITER_SW" type="INT32">
<short_desc>Loiter switch channel mapping</short_desc>
<short_desc>Loiter switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3728,20 +3760,20 @@ replay messages for logging</short_desc> @@ -3728,20 +3760,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_ACRO_SW" type="INT32">
<short_desc>Acro switch channel mapping</short_desc>
<short_desc>Acro switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3754,20 +3786,20 @@ replay messages for logging</short_desc> @@ -3754,20 +3786,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_OFFB_SW" type="INT32">
<short_desc>Offboard switch channel mapping</short_desc>
<short_desc>Offboard switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3780,20 +3812,20 @@ replay messages for logging</short_desc> @@ -3780,20 +3812,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_KILL_SW" type="INT32">
<short_desc>Kill switch channel mapping</short_desc>
<short_desc>Kill switch channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3806,20 +3838,20 @@ replay messages for logging</short_desc> @@ -3806,20 +3838,20 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0" name="RC_MAP_FLAPS" type="INT32">
<short_desc>Flaps channel mapping</short_desc>
<short_desc>Flaps channel</short_desc>
<min>0</min>
<max>18</max>
<values>
@ -3832,16 +3864,16 @@ replay messages for logging</short_desc> @@ -3832,16 +3864,16 @@ replay messages for logging</short_desc>
<value code="17">RC Channel 17</value>
<value code="16">RC Channel 16</value>
<value code="18">RC Channel 18</value>
<value code="1">RC Channel 1</value>
<value code="1">RC Channel 01</value>
<value code="0">Unassigned</value>
<value code="3">RC Channel 3</value>
<value code="2">RC Channel 2</value>
<value code="5">RC Channel 5</value>
<value code="4">RC Channel 4</value>
<value code="7">RC Channel 7</value>
<value code="6">RC Channel 6</value>
<value code="9">RC Channel 9</value>
<value code="8">RC Channel 8</value>
<value code="3">RC Channel 03</value>
<value code="2">RC Channel 02</value>
<value code="5">RC Channel 05</value>
<value code="4">RC Channel 04</value>
<value code="7">RC Channel 07</value>
<value code="6">RC Channel 06</value>
<value code="9">RC Channel 09</value>
<value code="8">RC Channel 08</value>
</values>
</parameter>
<parameter default="0.25" name="RC_ASSIST_TH" type="FLOAT">
@ -4061,6 +4093,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4061,6 +4093,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
<max>30</max>
<values>
<value code="24">Pitch 90°</value>
<value code="25">Pitch 270°</value>
<value code="20">Roll 270°</value>
<value code="21">Roll 270°, Yaw 45°</value>
<value code="22">Roll 270°, Yaw 90°</value>
<value code="23">Roll 270°, Yaw 135°</value>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
<value code="9">Roll 180°, Yaw 45°</value>
<value code="8">Roll 180°</value>
<value code="11">Roll 180°, Yaw 135°</value>
<value code="10">Roll 180°, Yaw 90°</value>
<value code="13">Roll 180°, Yaw 225°</value>
<value code="12">Pitch 180°</value>
<value code="15">Roll 180°, Yaw 315°</value>
<value code="14">Roll 180°, Yaw 270°</value>
<value code="17">Roll 90°, Yaw 45°</value>
<value code="16">Roll 90°</value>
<value code="19">Roll 90°, Yaw 135°</value>
<value code="18">Roll 90°, Yaw 90°</value>
<value code="-1">Internal mag</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG0_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
@ -4148,6 +4209,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4148,6 +4209,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
<max>30</max>
<values>
<value code="24">Pitch 90°</value>
<value code="25">Pitch 270°</value>
<value code="20">Roll 270°</value>
<value code="21">Roll 270°, Yaw 45°</value>
<value code="22">Roll 270°, Yaw 90°</value>
<value code="23">Roll 270°, Yaw 135°</value>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
<value code="9">Roll 180°, Yaw 45°</value>
<value code="8">Roll 180°</value>
<value code="11">Roll 180°, Yaw 135°</value>
<value code="10">Roll 180°, Yaw 90°</value>
<value code="13">Roll 180°, Yaw 225°</value>
<value code="12">Pitch 180°</value>
<value code="15">Roll 180°, Yaw 315°</value>
<value code="14">Roll 180°, Yaw 270°</value>
<value code="17">Roll 90°, Yaw 45°</value>
<value code="16">Roll 90°</value>
<value code="19">Roll 90°, Yaw 135°</value>
<value code="18">Roll 90°, Yaw 90°</value>
<value code="-1">Internal mag</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG1_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
@ -4235,6 +4325,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4235,6 +4325,35 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<long_desc>An internal magnetometer will force a value of -1, so a GCS should only attempt to configure the rotation if the value is greater than or equal to zero.</long_desc>
<min>-1</min>
<max>30</max>
<values>
<value code="24">Pitch 90°</value>
<value code="25">Pitch 270°</value>
<value code="20">Roll 270°</value>
<value code="21">Roll 270°, Yaw 45°</value>
<value code="22">Roll 270°, Yaw 90°</value>
<value code="23">Roll 270°, Yaw 135°</value>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
<value code="9">Roll 180°, Yaw 45°</value>
<value code="8">Roll 180°</value>
<value code="11">Roll 180°, Yaw 135°</value>
<value code="10">Roll 180°, Yaw 90°</value>
<value code="13">Roll 180°, Yaw 225°</value>
<value code="12">Pitch 180°</value>
<value code="15">Roll 180°, Yaw 315°</value>
<value code="14">Roll 180°, Yaw 270°</value>
<value code="17">Roll 90°, Yaw 45°</value>
<value code="16">Roll 90°</value>
<value code="19">Roll 90°, Yaw 135°</value>
<value code="18">Roll 90°, Yaw 90°</value>
<value code="-1">Internal mag</value>
</values>
</parameter>
<parameter default="0.0" name="CAL_MAG2_XOFF" type="FLOAT">
<short_desc>Magnetometer X-axis offset</short_desc>
@ -4309,11 +4428,49 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4309,11 +4428,49 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
</parameter>
<parameter default="0" name="SENS_BOARD_ROT" type="INT32">
<short_desc>Board rotation</short_desc>
<long_desc>This parameter defines the rotation of the FMU board relative to the platform. Possible values are: 0 = No rotation 1 = Yaw 45° 2 = Yaw 90° 3 = Yaw 135° 4 = Yaw 180° 5 = Yaw 225° 6 = Yaw 270° 7 = Yaw 315° 8 = Roll 180° 9 = Roll 180°, Yaw 45° 10 = Roll 180°, Yaw 90° 11 = Roll 180°, Yaw 135° 12 = Pitch 180° 13 = Roll 180°, Yaw 225° 14 = Roll 180°, Yaw 270° 15 = Roll 180°, Yaw 315° 16 = Roll 90° 17 = Roll 90°, Yaw 45° 18 = Roll 90°, Yaw 90° 19 = Roll 90°, Yaw 135° 20 = Roll 270° 21 = Roll 270°, Yaw 45° 22 = Roll 270°, Yaw 90° 23 = Roll 270°, Yaw 135° 24 = Pitch 90° 25 = Pitch 270°</long_desc>
<long_desc>This parameter defines the rotation of the FMU board relative to the platform.</long_desc>
<values>
<value code="24">Pitch 90°</value>
<value code="25">Pitch 270°</value>
<value code="20">Roll 270°</value>
<value code="21">Roll 270°, Yaw 45°</value>
<value code="22">Roll 270°, Yaw 90°</value>
<value code="23">Roll 270°, Yaw 135°</value>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
<value code="9">Roll 180°, Yaw 45°</value>
<value code="8">Roll 180°</value>
<value code="11">Roll 180°, Yaw 135°</value>
<value code="10">Roll 180°, Yaw 90°</value>
<value code="13">Roll 180°, Yaw 225°</value>
<value code="12">Pitch 180°</value>
<value code="15">Roll 180°, Yaw 315°</value>
<value code="14">Roll 180°, Yaw 270°</value>
<value code="17">Roll 90°, Yaw 45°</value>
<value code="16">Roll 90°</value>
<value code="19">Roll 90°, Yaw 135°</value>
<value code="18">Roll 90°, Yaw 90°</value>
</values>
</parameter>
<parameter default="0" name="SENS_FLOW_ROT" type="INT32">
<short_desc>PX4Flow board rotation</short_desc>
<long_desc>This parameter defines the rotation of the PX4FLOW board relative to the platform. Zero rotation is defined as Y on flow board pointing towards front of vehicle Possible values are: 0 = No rotation 1 = Yaw 45° 2 = Yaw 90° 3 = Yaw 135° 4 = Yaw 180° 5 = Yaw 225° 6 = Yaw 270° 7 = Yaw 315°</long_desc>
<long_desc>This parameter defines the rotation of the PX4FLOW board relative to the platform. Zero rotation is defined as Y on flow board pointing towards front of vehicle</long_desc>
<values>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
</values>
</parameter>
<parameter default="0.0" name="SENS_BOARD_Y_OFF" type="FLOAT">
<short_desc>Board rotation Y (Pitch) offset</short_desc>
@ -4332,13 +4489,44 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4332,13 +4489,44 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
</parameter>
<parameter default="0" name="SENS_EXT_MAG_ROT" type="INT32">
<short_desc>External magnetometer rotation</short_desc>
<long_desc>This parameter defines the rotation of the external magnetometer relative to the platform (not relative to the FMU). See SENS_BOARD_ROT for possible values.</long_desc>
<values>
<value code="24">Pitch 90°</value>
<value code="25">Pitch 270°</value>
<value code="20">Roll 270°</value>
<value code="21">Roll 270°, Yaw 45°</value>
<value code="22">Roll 270°, Yaw 90°</value>
<value code="23">Roll 270°, Yaw 135°</value>
<value code="1">Yaw 45°</value>
<value code="0">No rotation</value>
<value code="3">Yaw 135°</value>
<value code="2">Yaw 90°</value>
<value code="5">Yaw 225°</value>
<value code="4">Yaw 180°</value>
<value code="7">Yaw 315°</value>
<value code="6">Yaw 270°</value>
<value code="9">Roll 180°, Yaw 45°</value>
<value code="8">Roll 180°</value>
<value code="11">Roll 180°, Yaw 135°</value>
<value code="10">Roll 180°, Yaw 90°</value>
<value code="13">Roll 180°, Yaw 225°</value>
<value code="12">Pitch 180°</value>
<value code="15">Roll 180°, Yaw 315°</value>
<value code="14">Roll 180°, Yaw 270°</value>
<value code="17">Roll 90°, Yaw 45°</value>
<value code="16">Roll 90°</value>
<value code="19">Roll 90°, Yaw 135°</value>
<value code="18">Roll 90°, Yaw 90°</value>
</values>
</parameter>
<parameter default="0" name="SENS_EXT_MAG" type="INT32">
<short_desc>Set usage of external magnetometer</short_desc>
<long_desc>* Set to 0 (default) to auto-detect (will try to get the external as primary) * Set to 1 to force the external magnetometer as primary * Set to 2 to force the internal magnetometer as primary</long_desc>
<short_desc>Select primary magnetometer</short_desc>
<min>0</min>
<max>2</max>
<values>
<value code="1">External is primary Mag</value>
<value code="0">Auto-select Mag</value>
<value code="2">Internal is primary Mag</value>
</values>
</parameter>
</group>
<group name="Sensor Enable">
@ -4346,6 +4534,11 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4346,6 +4534,11 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>Enable Lidar-Lite (LL40LS) pwm driver</short_desc>
<min>0</min>
<max>1</max>
<reboot_required>true</reboot_required>
<values>
<value code="1">Enabled</value>
<value code="0">Disabled</value>
</values>
</parameter>
</group>
<group name="Subscriber Example">
@ -4567,6 +4760,12 @@ This is used for gathering replay logs for the ekf2 module</short_desc> @@ -4567,6 +4760,12 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<min>0.0</min>
<max>30.0</max>
</parameter>
<parameter default="2.0" name="VT_TRANS_MIN_TM" type="FLOAT">
<short_desc>Front transition minimum time</short_desc>
<long_desc>Minimum time in seconds for front transition.</long_desc>
<min>0.0</min>
<max>10.0</max>
</parameter>
</group>
<group name="mTECS">
<parameter default="0" name="MT_ENABLED" type="INT32">

Write Preview
Loading…
Cancel
Save