If TileDB is bigger than 2GB,
--- sq = QString("SELECT COUNT(size), SUM(size) FROM Tiles WHERE tileID IN (SELECT A.tileID FROM SetTiles A join SetTiles B on A.tileID = B.tileID WHERE B.setID ---
This query holds QGCTileCache Worker.
I solved problems with adding an index like that.
* VideoSettings: Add MAC VideoToolbox decoder
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* GSteamer: Use VideoDecodeOptions enum over bool check
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
QProces::execute(QString) was deprecated, QProcess::execute(QString, QStringList) should be used
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* LinkManager::createConnectedLink: use make_shared to avoid separate allocation
Also avoids some memory leaks when returning early.
* fix LinkManager: set setAutoConnect()
* fix MAVLinkProtocol: use a weak_ptr to check if the link stays valid
It is not enough to check if the link is valid only on entering the method.
If message handling called VehicleLinkManager::closeVehicle(), the link
was removed, and possibly deleted. If more mavlink messages were in the
same buffer, the link was accessed again, triggering a segfault.
This happened for example when rebooting the vehicle from parameter editor.
* Vehicle: fix uninitialized variable _capabilityBits
From valgrind:
==690288== Conditional jump or move depends on uninitialised value(s)
==690288== at 0x5B5F18: GeoFenceController::supported() const (GeoFenceController.cc:495)
==690288== by 0x5B309E: GeoFenceController::_managerVehicleChanged(Vehicle*) (GeoFenceController.cc:125)
==690288== by 0x5B79AF: QtPrivate::FunctorCall<QtPrivate::IndexesList<0>, QtPrivate::List<Vehicle*>, void, void (GeoFenceController::*)(Vehicle*)>::call(void (GeoFenceController::*)(Vehicle*), GeoFenceController*, void**) (qobjectdefs_impl.h:152)
==690288== by 0x5B7797: void QtPrivate::FunctionPointer<void (GeoFenceController::*)(Vehicle*)>::call<QtPrivate::List<Vehicle*>, void>(void (GeoFenceController::*)(Vehicle*), GeoFenceController*, void**) (qobjectdefs_impl.h:185)
==690288== by 0x5B7325: QtPrivate::QSlotObject<void (GeoFenceController::*)(Vehicle*), QtPrivate::List<Vehicle*>, void>::impl(int, QtPrivate::QSlotObjectBase*, QObject*, void**, bool*) (qobjectdefs_impl.h:414)
==690288== by 0x9D43DF5: QMetaObject::activate(QObject*, int, int, void**) (in /opt/install/qt/5.12.5/gcc_64/lib/libQt5Core.so.5.12.5)
==690288== by 0x913C9C: PlanMasterController::managerVehicleChanged(Vehicle*) (moc_PlanMasterController.cpp:544)
==690288== by 0x5FF00B: PlanMasterController::_activeVehicleChanged(Vehicle*) (PlanMasterController.cc:160)
==690288== by 0x5FE9A4: PlanMasterController::startStaticActiveVehicle(Vehicle*, bool) (PlanMasterController.cc:116)
==690288== by 0x912EB9: PlanMasterController::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) (moc_PlanMasterController.cpp:267)
==690288== by 0x913A2A: PlanMasterController::qt_metacall(QMetaObject::Call, int, void**) (moc_PlanMasterController.cpp:473)
==690288== by 0x880E5C8: QQmlObjectOrGadget::metacall(QMetaObject::Call, int, void**) const (in /opt/install/qt/5.12.5/gcc_64/lib/libQt5Qml.so.5.12.5)
* FTPManager: fix uninitialized variable & message filter logic
From Valgrind:
==690288== Conditional jump or move depends on uninitialised value(s)
==690288== at 0x6E74E6: FTPManager::_mavlinkMessageReceived(__mavlink_message const&) (FTPManager.cc:108)
==690288== by 0x70D164: Vehicle::_mavlinkMessageReceived(LinkInterface*, __mavlink_message) (Vehicle.cc:603)
==690288== by 0x726F53: QtPrivate::FunctorCall<QtPrivate::IndexesList<0, 1>, QtPrivate::List<LinkInterface*, __mavlink_message>, void, void (Vehicle::*)(LinkInterface*, __mavlink_message)>::call(void (Vehicle::*)(LinkInterface*, __mavlink_message), Vehicle*, void**) (qobjectdefs_impl.h:152)
==690288== by 0x725990: void QtPrivate::FunctionPointer<void (Vehicle::*)(LinkInterface*, __mavlink_message)>::call<QtPrivate::List<LinkInterface*, __mavlink_message>, void>(void (Vehicle::*)(LinkInterface*, __mavlink_message), Vehicle*, void**) (qobjectdefs_impl.h:185)
==690288== by 0x723B4B: QtPrivate::QSlotObject<void (Vehicle::*)(LinkInterface*, __mavlink_message), QtPrivate::List<LinkInterface*, __mavlink_message>, void>::impl(int, QtPrivate::QSlotObjectBase*, QObject*, void**, bool*) (qobjectdefs_impl.h:414)
==690288== by 0x9D43DF5: QMetaObject::activate(QObject*, int, int, void**) (in /opt/install/qt/5.12.5/gcc_64/lib/libQt5Core.so.5.12.5)
==690288== by 0x95DE46: MAVLinkProtocol::messageReceived(LinkInterface*, __mavlink_message) (moc_MAVLinkProtocol.cpp:346)
==690288== by 0x757522: MAVLinkProtocol::receiveBytes(LinkInterface*, QByteArray) (MAVLinkProtocol.cc:362)
==690288== by 0x74C71E: QtPrivate::FunctorCall<QtPrivate::IndexesList<0, 1>, QtPrivate::List<LinkInterface*, QByteArray>, void, void (MAVLinkProtocol::*)(LinkInterface*, QByteArray)>::call(void (MAVLinkProtocol::*)(LinkInterface*, QByteArray), MAVLinkProtocol*, void**) (qobjectdefs_impl.h:152)
==690288== by 0x74BAB4: void QtPrivate::FunctionPointer<void (MAVLinkProtocol::*)(LinkInterface*, QByteArray)>::call<QtPrivate::List<LinkInterface*, QByteArray>, void>(void (MAVLinkProtocol::*)(LinkInterface*, QByteArray), MAVLinkProtocol*, void**) (qobjectdefs_impl.h:185)
==690288== by 0x74B3B7: QtPrivate::QSlotObject<void (MAVLinkProtocol::*)(LinkInterface*, QByteArray), QtPrivate::List<LinkInterface*, QByteArray>, void>::impl(int, QtPrivate::QSlotObjectBase*, QObject*, void**, bool*) (qobjectdefs_impl.h:414)
==690288== by 0x9D43DF5: QMetaObject::activate(QObject*, int, int, void**) (in /opt/install/qt/5.12.5/gcc_64/lib/libQt5Core.so.5.12.5)
* FTPManager: fix uninitialized Request
- Parts of the header were uninit
- zero init the payload allows for mavlink trimming
* Fix ~TerrainTile: use delete[] for arrays
* FactGroup: fix expensive & unnecessary object creation and map lookups
Every mavlink message reception was leading to creation of a list and
key lookup for each of the keys. This can easily be avoided and results
in noticeable reduction of CPU load (I'm seeing overall around 4% with
a pixhawk on USB).
The same pattern exists elsewhere as well
* mavlink console: use TextArea and other improvements
This is a bit slower, so we do some mitigations:
- limit update rate to 30hz
- limit history (see next commit)
changes:
- user can select & copy output
- auto-scrolling: update is paused when scrolling up, any key input will
scroll to the bottom
- feel is more like a shell w/o extra text field.
(on mobile there's still a separate text field as input is handled
differently)
- handle multi-line commands from clipboard
- coloring of ERROR's and WARNing's
- set text focus to shell input
* MavlinkConsoleController: limit history to 500 lines
As CPU load for text change increases with more history due to the use of
TextArea.
* MavlinkConsoleController: add cursor x position support
Fixes handling of the 'erase current line from cursor' (K) command.
The bug was apparent for example when 'nsh> <ESC>[K' was split into several
packets. The first part was cleared when receiving the 2. packet.
* MavlinkConsoleController: newline handling fixes
- do not add a newline when entering a command
- ensure line exists when moving the cursor down
* VideoReceiver: Enable and put hardware decode with higher priority over software decode
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* VideoReceiver: Move from old decodebin to decodebin3
decodebin3 is a newer and smarter version of the old decodebin.
It can handle different stream types and a better connection
between gstreamer elements, fixing some weird video problems.
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* Settings: Add forceVideoDecoder
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* VideoReceiver: Break blacklist to be called outside gstreamer initialization function
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* ScreenTools: Add isLinux property
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* GeneralSettings: Add forceVideoDecoder option
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* FactSystem: Add removeEnumInfo function
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* Settins: Use enum string over string for forceVideoDecode
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* VideoMananager: Call GStreamer blacklist
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
* APMSubMotorComponent.qml: do not send motor test messages after disarm command
* Vehicle: Change signature of motorTest to allow not showing errors
* APMMotorComponent.qml: Update to use new signature of motorTest()
* APMSubMotorComponent.qml: Update to use new signature of motorTest() with showErrors=false
* MotorComponent.qml: Update to use new signature of motorTest()
* Terrain: Use average within four points for elevation
* Rework tool strip buttons to fix big pile of bugs
* Fix log name
* Rework terrain code to support terrain adjustment in turn segments
* Temporary disable of terrain unit test
* Fix bugs found by unit tests
PX4BuildBot
Don Gagne
DonLakeFlyer
Ji Hyunjong
Beat Küng
Patrick José Pereira
pestophagous
Phillip Kocmoud
Anton Erasmus
Willian Galvani
Daniel Agar